No products
High-quality replacement gudgeon pin circlips from Malossi for 10mm and...
The HAT weights are very durable and self lubricating. Available in a...
Pro Taper is well known for manufacturing high-quality grips and...
Budget weights by Motoforce, choice of weights. Available in a range of...
Replacement reed valve gasket for all Minarelli Horizontal engines.
The thermal grade of the spark-plug is of prime importance with tuning...
We can offer high-quality exhaust gaskets for all common original, sport...
The Polini FOR RACE crankshafts are developed to increase the...
The Polini FOR RACE crankshafts are developed to increase the...
These HI-SPEED variators are Polini's...
Reference: BT18092
Brand: Scootertuning.ca
Complete engine gasket set for 50cc GY 139QMB/QMA engined scooters with 12” wheels or larger; v-belt length 788mm, crank-gearbox input shaft 28cm. This gasket set contains all the gaskets needed for complete serving. A far more low-cost alternative to buying individually and you won’t leave any out. Set does not include crank seals; we offer these in a...
Reference: 26784
Brand: Naraku
Complete engine gasket set for horizontal Kymco SF10 AC engines. This gasket set contains all relevant gaskets needed for complete serving of air-cooled engines. Please note: Set does not include oil seals.
Reference: NK160.65
Brand: Naraku
Top quality Naraku engine gasket set. Precise and durable. Made in Italy. Complete gasket set. Delivery as shown. Contains all relevant engine gaskets. Oil seals need to be purchased separately.
Reference: BT27505
Brand: Scootertuning.ca
Replacement motor bearings for scooters. Dimensions (Internal x External x Width): 10x30x30mm
Reference: NK102.01
Brand: Naraku
Complete set of quality crank oil seals from Kymco, Sym scooters with horizontal cylinders. Set contains all the important oil seals found in the engine. A must for engine overhauls. Purchasing individual shaft seals is usually more expensive, and when working on the engine or the gearbox, seals should always be replaced.
Reference: NK102.07
Brand: Naraku
Complete set of quality crank oil seals from Naraku, for scooters with 125/150cc GY6 engines. Set contains all the important oil seals found in the engine. A must for engine overhauls. Purchasing individual shaft seals is usually more expensive, and when working on the engine or the gearbox, seals should always be replaced.
Reference: NK102.03
Brand: Naraku
Complete set of quality crank oil seals from Naraku, for scooters with 50cc Kymco 4-stroke and GY6 engines. Set contains all the important oil seals found in the engine. A must for engine overhauls. Purchasing individual shaft seals is usually more expensive, and when working on the engine or the gearbox, seals should always be replaced.
Reference: NK102.10
Brand: Naraku
Crank shaft seal set from Naraku for 50cc Minarelli engines. Kit contains all the important crank seals for servicing mopeds with Minarelli engines. Always use new crank seals when carrying out a complete strip down service. The Naraku seal set is significantly cheaper than purchasing individual items. Set contains 5 crank rings.
Reference: GY15430
Brand: Scootertuning.ca
Bolt and nut set for GY6 125/150cc engines. Set contains almost all bolts, oil draining plugs, nuts, cylinder studs etc. Ordering individual engine bolts can be expensive, so here we offer a complete set at a fair price. Set pictured here is the complete set.
Reference: BT13886
Brand: Scootertuning.ca
Bolt and nut set for GY6 50cc 139QMB/QMA engines. Set contains almost all bolts, oil draining plugs, nuts, cylinder studs etc. Ordering individual engine bolts can be expensive, so here we offer a complete set at a fair price. Set pictured here is the complete set.
Reference: BT15526
Brand: Scootertuning.ca
Some scooters are sent from the factory with two rear shock absorbers. These models mostly use aluminium exhaust systems. These are generally mounted with 2 ring clamps onto a special exhaust bracket on the right-hand side of the engine. The second rear shock is also generally mounted to this bracket. For this reason, this system is only suitable for...
Reference: GY15497
Brand: Scootertuning.ca
Some scooters are sent from the factory with two rear shock absorbers. These models mostly use aluminium exhaust systems. These are generally mounted with 2 ring clamps onto a special exhaust bracket on the right-hand side of the engine. The second rear shock is also generally mounted to this bracket. For this reason, this system is only suitable for...
Reference: IP25160
Brand: Scootertuning.ca
Exhaust bolts for almost all cylinders. 20mm in length, 10mm spanner or flat head.
Reference: NK100.21
Brand: Scootertuning.ca
Exhaust manifold gasket for scooters and mopeds with original and tuning/sports exhaust systems with round metal gaskets and dimensions of approx. 25X33x4mm.
Reference: IP11406
Brand: Scootertuning.ca
Gasket for vehicles not fitted with a round exhaust manifold gasket. This is a universal gasket for all flat exhaust manifolds. Solid design and a sheet metal inner ring between the gasket material ensures optimal heat resistance and no blow through. Thickness: 3.5mm Suitable for almost all 50cc scooters.
Reference: NK400.01
Brand: Naraku
The NARAKU crossover combines Racing design with an internal structure that is tailored to the requirements of 4-stroke engines. Road legal thanks to E-certification . Most 4-stroke exhausts are just borrowed from 2-stroke series and only the brackets have been altered. The result is a visually appealing system, generally with poorer performance than the...
Reference: BT15632
Brand: Scootertuning.ca
SLS Exhaust system gasket – 130QMB/A
Reference: BT15475
Brand: Scootertuning.ca
SLS with hose for GY6 50cc exhaust systems with SLS. Often this part is necessary if the mounting bolts have rusted or locked, or the engine is running poorly as a result of a defective valve. Valve sent including hose. Please order gasket separately, as not contained in the delivery.
Reference: IP13864
Brand: Scootertuning.ca
M6 exhaust port studs with collar nut (galvanized). Replacement for broken or bent studs. 32mm in length. Set of 2xM6 studs and 2xM6 collar nuts.
Reference: NK101.91
Brand: Naraku
0Replacement studs with M6 thread at both ends, including M6 nuts for use on exhaust manifolds. Complete length: 32mm. set of 2 M6 studs and 2 M6 nuts. The nut length allows for solid mounting of the exhaust system, in a way that standard nuts cannot.
Reference: NK400.09
Brand: Naraku
The homologated Naraku Traffic system combines a modern, fresh design with pleasant sound. This design adapts wonderfully to new outfits of modern scoots. Even when combined with current futuristic bodies, it doesn't seem oldfashioned and is thus more than just an inexpensive replacement exhaust. The Naraku Traffic offers more than good looks, though....
Reference: 0307181
Brand: Tecnigas
High-torque exhaust in a subtle design. Provides considerably more top speed. For those who need a new exhaust and want more power but do not want to ride with a small and particularly sporty sounding exhaust on their scooter Very good torque curve and excellent performance on 50cc and 70cc Sports cylinder.
Reference: M4T64-N
Brand: Turbokit
Among insiders, the Turbo Kit name is synonymous with peak performance. The GMax exhaust throws the cat among the pigeons with a great system that give a rider everything they could want. Maximum power, muffled, unobtrusive sound, stainless steel / aluminium construction, great looks, outstanding value for money and everything absolutely road legal thanks...
Reference: M4T36-N
Brand: Turbokit
Among insiders, the Turbo Kit name is synonymous with peak performance. The GMax exhaust throws the cat among the pigeons with a great system that give a rider everything they could want. Maximum power, muffled, unobtrusive sound, stainless steel / aluminium construction, great looks, outstanding value for money and everything absolutely road legal thanks...
Reference: M4T61-N
Brand: Turbokit
Among insiders, the Turbo Kit name is synonymous with peak performance. The GMax Scooters exhaust is a new product, which combines everything that a 4-stroke Scooters rider could ever desire. Maximum power, muffled, unobtrusive sound, stainless steel / aluminium construction, great looks, outstanding value for money and everything absolutely road legal...
Reference: M4T66-N
Brand: Turbokit
Among insiders, the Turbo Kit name is synonymous with peak performance. The GMax Scooters exhaust is a new product, which combines everything that a 4-stroke Scooters rider could ever desire. Maximum power, muffled, unobtrusive sound, stainless steel / aluminium construction, great looks, outstanding value for money and everything absolutely road legal...
Reference: KW13980
Brand: Scootertuning.ca
Fan cover for CPI, Generic, Keeway, Mawi, Longija right-hand side fans and air-cooled Minarelli engines.
Reference: 32104
Brand: Scootertuning.ca
Alternator fan cover for scooters with the 50cc Minarelli vertical engine.
Reference: GY15118
Brand: Scootertuning.ca
Original fan cover for 125/150cc GY6 4-stroke Chinese-built engines.
Reference: NK301.01
Brand: Naraku
Chrome flywheel fan cover for the 139QMA/QMB 50cc 4 stroke engines. This product is a nice upgrade or replacement for any broken cover.
Reference: 32103
Brand: Scootertuning.ca
Alternator fan cover for CPI, Generic, Keeway, Mawi, Longija 50cc along with other scooters with the 50cc Minarelli engine.
Reference: BT16623
Brand: Scootertuning.ca
Long gearbox output shaft for vehicles with a swinging arm on the right-hand side. Mounted through the swing arm. These models generally have twin rear shocks.
Reference: BT13866
Brand: Scootertuning.ca
Gearbox output shaft for GY6 139QMB/QMA engines. This is where the rear wheel is mounted. Suitable for all rear drum brake models.
Reference: GY14631
Brand: Scootertuning.ca
Indicator relays for 125/150cc GY6 4-stroke Chinese-built scooters. 3-pin plug.
Reference: 15363
Brand: Buzzetti
A flywheel puller to remove the rotor of the alternator; necessary when working on the alternator or any components situated underneath and when changing bearings or replacing the crankshaft. The puller's body will be screwed into the threads provided in the rotor; then the centre bolt will be tightened to exert steady pressure to draw the rotor off the...
Reference: NK600.06F
Brand: Naraku
Forged 63mm Naraku piston for 180cc cylinder kits for GY6 and air-cooled Kymco scooters. The manufacturing of this forged piston means it is more durable and minimises friction. The raised piston skirt ensures a tighter fit.