No products
High-quality replacement gudgeon pin circlips from Malossi for 10mm and...
The HAT weights are very durable and self lubricating. Available in a...
Pro Taper is well known for manufacturing high-quality grips and...
Budget weights by Motoforce, choice of weights. Available in a range of...
Replacement reed valve gasket for all Minarelli Horizontal engines.
The thermal grade of the spark-plug is of prime importance with tuning...
We can offer high-quality exhaust gaskets for all common original, sport...
The Polini FOR RACE crankshafts are developed to increase the...
The Polini FOR RACE crankshafts are developed to increase the...
Voca offer here Wheels replica of the...
Reference: 171.0553
Brand: Polini
Polini presents the digital ignition kit for all the 50cc scooters equipped with liquid cooled Piaggio engines and liquid or air cooled Minarelli engines. The ignition kit includes: gear case support, stator and rotor, coil with CDI provided with the map of electronic advance ignition. The setup is very easy and it lets the advance to be mechanically...
Reference: MF84.101
Brand: Motoforce
white=+1000rpm / black=+1500rpm / blue=+2000rpm. One of the main things necessary to set up a tuned engine is a stronger torque spring. Torque springs are placed behind the clutch to press the rear pulley to the drive belt. If the spring is too weak, the belt will slip and accelerating becomes impossible. Please note that using a stronger torque spring...
Reference: 28021
Brand: Scootertuning.ca
Alternator stator for PGO Big Max, G-Max, Hot, PMS, PMX and T-Rex scooters.
Reference: 0900-1005.10
Brand: NCY
This NCY performance scooter CDI igniter module works on most current AC GY6 50cc/150cc scooters made in China using the 139QMB/157QMJ engine. Higher voltage output, aggressive mapping as well as the removal of your rev limiter make this ideal for custom builds, or just simply trying to get a few more MPH's. A billet aluminum case protects this from road...
Reference: 280.0012
Brand: Polini
Small-end bearings from Polini in different diameters. Please check the size of the original bearing or the gudgeon pin before ordering.
Reference: 3113579
Brand: Malossi
Cylinder kit Malossi I-Tech 70cc 4 stroke cylinder kit for Minarelli engine. It is necessary to use an injection control unit with this cylinder kit.
Reference: 27-L521
Brand: Motul
Technosynthetic • Use of Technosynthese & ester base stocks: less friction & wear • Additization especially reinforced for gears allowing a decrease of wear and working noises • Constant viscosity at high temperature during oils lifetime • Meets JASO MA Standards: API SL / SJ / SH / SG
Reference: TRS-FBL30
Brand: TRS
Black stainless brake line with chrome straight fitting and 70 degree chrome banjo fitting on other end. Measures 29 inches in total. Perfect fit for those RRGS/Adelin front end kits. don't have excess line showing. really clean look.
Reference: S6-0503
Brand: Stage6
New Stage6 maxi sticker sheets in Din A2 and A4. Now with Stage6 R/T logo. You can choose between two versions: white for dark surfaces or black for light surfaces; for the smaller set, there is only one colour version.
Reference: 28690
Brand: Scootertuning.ca
Replacement fuel pump for various Yamaha and MBK maxi scooters, perfect replacement for worn or defective pumps.
Reference: 2490
Brand: Tun'R
Reference: MF10.10140
Brand: Motoforce
We can offer you these reed valve gasket from Motoforce for a fair price.
Reference: S6-35013BL
Brand: Stage6
More and more air filters come with bigger fitting diameters to optimize the carb’s air flow. We offer you air filters of this design for Mikuni (44mm fitting diameter) and for Stage6 flat-slide/ Keihin (48mm fitting diameter) carburetors. They are available in red and blue and of course can also be used for other carbs with similar fitting diameters....
Reference: 249.050
Brand: Polini
Different from the 2G Evolution, Polini's 3G ForRace clutch has still been equipped with 2 shoes, but now it also comes with 3 shoes. Clutch engagement can be adjusted by exchanging the supplied springs. For fine adjustment, it is done with the help of a hex key wrench from the side. However, the springs haven't been positioned to face the front. So if...
Reference: S6-5116600
Brand: Stage6
Drive face with optimized drive face angle. In order to keep costs down, original racing drives are usually cast or - even worse - pressed steel. When these parts are cooling down after casting, the metal is still molten and the drive face angles can often vary. Due to the fact that racing engines have a very narrow power band, these tolerances have...
Reference: S6-5916627
Brand: Stage6
High-quality oversize racing drive belt with kevlar fibres; excellent performance and, thanks to a unique compound, very good grip. This belt has been developed by Stage6 specifically for Oversize CVT systems and is therefore a great upgrade for the Stage6 R/T CVT system, getting you ready for high-speed racing in circuit as well as sprint races!...
Reference: NK200.01
Brand: Naraku
Naraku V.3 carburettor 18.5mm for 50cc 4-stroke scooters. Top quality at an affordable price. No start issues as with Chinese alternatives and good drive. Prevents flat sports, and allows you to conveniently drain the float bowls. Complete with E-choke and 84 main jet. 18.5mm connection is fine for 4-stroke scooters and mini-quads from 50-90cc with 139QMB...
Reference: S6-SSP630ET002
Brand: Stage6
We offer here adaptator for use M8 Stage6 mirror on scooter with M10 mirror thread.
Reference: TRS-IA001/AL
Brand: TRS
Running a forward facing carb, and having problems with how high the carburator sits? Some carbs have a problem when angled too high in the front, and this can cause the engine to not run right, and have problems feeding fuel properly! This flange also turns the carb in more to the center of the bike so that when running a fat tire setup, the carb doesn't...
Reference: PG0012
Brand: Stylepro
We offer here Stylepro 4mm jet set made for PGO and Genuine original carburettor available in different size.
Reference: 6118884
Brand: Malossi
Malossi’s overrange kit has been completely revised and now goes under the name of “La Furia Rossa”. The rear pulleys are completely made out of aluminium, minimising weight and also giving a more instant response. They now come with holes for better cooling, and the exterior faces are anodised red. The contact surfaces of the Multivar variator have been...
Reference: W542.10.15
Brand: Wurth
Universal clamp that we like to use to secure brake hoses / brake cables to the frame or engine. M6 hole, can fit cables up to 10mm diameter.
Reference: NK101.97
Brand: Naraku
Naraku cylinder studs for horizontal Minarelli and Minarelli-based cylinders. Great as a replacement for broken or damaged studs. Individual stud. The stud is 110mm long with an M7 thread.
Reference: MF09.16610
Brand: Motoforce
Replacement ignition coil from Motoforce for the most common 50cc two and four stroke scooters. Straight-forward installation.
Reference: 3B3-E4451-00-00
Brand: Yamaha
Replacement OEM Yamaha parts.
Reference: EB060
Brand: Easyboost
How to install crankshaft bearings? Easyboost answers this question with this Bearing Tool.
Reference: TH40ADIO50-1741
Brand: Scootertuning.ca
Reference: 7615375B
Brand: Malossi
The new MALOSSI 7.1 MHR GREASE, recommended for use in extreme conditions or with operating temperatures up to 160° C. MALOSSI 7.1 MHR GREASE is recommended for the lubrication of scooter variators and rear pulley assemblies, operating under severe load and temperature conditions; specifically it guarantees perfect lubrication between the hub and half...
Reference: 347036
Brand: Malossi
Replacement piston for Malossi Sport 70cc cylinder kits.
Reference: MF48.00022
Brand: Motoforce
The Motoforce Racing fuel filter is equipped with a sturdy metal housing and a sintered bronze ball filter element. These filters have improved filtration performance over conventional paper or net filters. When the filter becomes clogged, it can easily be removed and cleaned. Connection: 8mm .
Reference: MF85.107
Brand: Motoforce
107mm Motoforce clutch in OEM quality, reproduction of the original part. An excellent replacement part !
Reference: MF60.19856
Brand: Motoforce
Especially where the kickstart is concerned, there should be no technical faults. In order to provide a better overview, we have divided the kickstart replacement parts into groups according to engines. Nevertheless, it may still be necessary to check sizes/dimensions with some parts, e.g. with bushes and kickstart shafts, as diameters may vary there.
Reference: 1131046
Brand: Airsal
(10mm Gudgeon pin) With the Airsal 70cc, you get an aluminium cylinder for the same price that would normally buy you a common cast-iron cylinder. It has a hardened chrome-nikasil bore, and due to the fact that it is made of aluminium it has better heat dissipation properties than the cast-iron version so that piston seizures are a lot less common....
Reference: VCR-SD880/
Brand: Voca
VOCA handlebar manufactured of high quality T6 alloy. The VOCA scooter handlebars improve the visual aspect as well as the handling. A very resistant, very light handlebar in clean VOCA design. 640mm wide, optionally to be reduced using cutting lines that are laser-engraved on the surface. On the surface of the VOCA handlebars you find a laser-engraved...
Reference: S41PLAT008
Brand: Athena
Athena offers a wide range of variators and torque drivers for scooters and maxi-scooters. The choice of materials, together with the specific design of the roller sliding lanes, guarantees an optimisation of the engine power at each rotation rate by extending the acceleration and the highest velocity with only a small loss of power and engine torque....
Reference: S6-0502/S
Brand: Stage6
New Stage6 maxi sticker sheets in Din A2 and A4. Now with Stage6 R/T logo. You can choose between two versions: white for dark surfaces or black for light surfaces; for the smaller set, there is only one colour version.