Aucun produit
Circlips pour goujons de rechange de haute qualité de Malossi pour...
Ensemble de 6 rouleaux de précision Malosi et de haute qualitée, inclant...
Pneus de scooter double usage de haute qualité IRC qui offrent une bonne...
Pro Taper is well known for manufacturing high-quality gripPro Taper est...
Poids economique par Motoforce avec un vaste choix de poid. Disponible...
Joint de boîte d'admission/boîte à clapets pour moteur Minarelli...
Le degré thermique de la bougie est de première importance avec des...
Nous pouvons offrir des joints d’échappement de haute qualité pour tous...
Here is the second version of the famous MOST Racing oil pan cap for...
Most offers us here its new high-quality oil pan cap cut from solid...
Quickly recognizable thanks to the MOST Racing logos on the length and...
Quickly recognizable thanks to the MOST Racing logos on the length and...
MOST Racing offers a clutch bell for scooters with horizontal and...
MOST Racing offers a reinforced transmission belt for MBK scooters with...
Huile de transmission et de vitesse...
Reference: GY15040
Manufacturer: Scootertuning.ca
Alternator stator for GY6 125/150cc machines. There are many variations of this alternator of these engines. They can however be quite easy to identify. There are stators with 6, 8 or 11 coils. Please check which of these you have. The connector cable plug has 3 pins and has 2 additional connector cables with this 8 coil type alternator.
Reference: GY20956
Manufacturer: Scootertuning.ca
Rotor/magnet wheel for alternators. Alternators are currently available with 6 or 8 coils. Please check your original item to check which one you require! Also known as the fly wheel mass - this item is for 6 coil variants.
Reference: IP32577
Manufacturer: Scootertuning.ca
Reinforced starter motor with more power for 125 and 150cc scooters with the GY6 engine. Very good option for use on tuned engines.
Reference: GY14955
Manufacturer: Scootertuning.ca
Grinding and mechanical noises when starting the engine are often a sign that the starter clutch is faulty. The carrier sticks and no longer releases properly. In the worst case scenario, this can be catastrophic for the motor. As many parts of the starter mechanism are inter-connected, they are all subject to a fair bit of wear. Replacing the starter...
Reference: GY16640
Manufacturer: Scootertuning.ca
Gearbox output shaft (wheel shaft) for GY6 125/150cc 4-stroke Chinese-built engines. This version is for vehicles with a rear drum brake. Shaft length 135mm.
Reference: GY14654
Manufacturer: Scootertuning.ca
Gearbox output shaft - long version. For rear wheel mounting. Total length: 197mm, used for vehicles with additional swinging arm on the right-hand side. Generally scooters use 2 rear shocks and a disc brake. Toothing as per original.
Reference: BT80011
Manufacturer: Scootertuning.ca
Oil strainer bolt for GY6 50ccm 139QMB/QMA and 125/150ccm 152/157QMI 4-stroke engines.
Reference: BT14736
Manufacturer: Scootertuning.ca
Oil strainer O-ring bolt – 139QMB/QMA
Reference: BT13857
Manufacturer: Scootertuning.ca
Oil strainer 50cc GY6 139QMB/QMA engines and 125/150cc GY6 152/157QMI.
Reference: BT13856
Manufacturer: Scootertuning.ca
Oil strainer spring for all 50cc GY6 139QMB/QMA 4-stroke engines and 125/150cc 152/157QMI.
Reference: GY18252
Manufacturer: Scootertuning.ca
Fan Wheel for air cooling. This item sits on the alternator rotor and is attached with 4 screws.
Reference: GY15118
Manufacturer: Scootertuning.ca
Original fan cover for 125/150cc GY6 4-stroke Chinese-built engines.
Reference: BT80005
Manufacturer: Scootertuning.ca
Oil dip stick for GY6 50ccm, 125cc and 150cc engines. Includes O-ring.
Reference: IP15427
Manufacturer: Scootertuning.ca
Oil filler plug for Kymco, GY6 50/125/150cc – Silver
Reference: GY14662
Manufacturer: Scootertuning.ca
Complete oil pump for 125/150cc GY6 engines. Delivery as shown.
Reference: GY18250
Manufacturer: Scootertuning.ca
Dowel pin set for 125/150cc GY6 engines. Delivery contains: 6x dowel pins for M8 and 8x dowel pins for M6.
Reference: BT22008
Manufacturer: Scootertuning.ca
Horn for 12V on-board computers. Delivery as shown.
Reference: 1100-1454.5
Manufacturer: NCY
NCY upgrade/replacement dipstick. Give your oil dipstick a stunning look with this titanium finish. Quality upgrade that looks great on your bike.
Reference: GY6-DP-1020
Manufacturer: Taida
Reference: GY6-SC
Manufacturer: Taida
Reference: GY6-PM001
Manufacturer: Taida
Reference: BT32006
Manufacturer: Scootertuning.ca
Pressure-activated petrol tap with M16 thread for GY6 scooters with metal tanks. Delivery also includes the small pre-filter pipe that sits in the petrol tank. Only suitable for tanks with threaded connection Made in China. Original replacement part for Chinese scooter brands.
Reference: GY14873
Manufacturer: Scootertuning.ca
Pressure-activated petrol tap for 50cc Chinese scooters with plastic tanks (e.g. New models of the Rex RS and Peugeot V-Clic) and most Chinese 4-stroke scooter GY6 125-180cc engines. A petrol tap failure can often lead to starting difficulties and cut-outs whilst riding. When the membrane is stuck, either no, or not enough, fuel passes through. To remedy...
Reference: TFC-013
Manufacturer: TFC
Reference: GY6-PM001-OR-1
Manufacturer: Taida
Reference: TRS-OD19
Manufacturer: TRS
The TRS dipstick is ONE SOLID PIECE not 2 like others. No more worring if you the stick is going to fall in the motor. Give your oil dipstick a stunning look with this TRUE one-piece Dipstick, Quality upgrade that looks great on your bike. Works on all GY6 and Honda Ruckus models. Made here in the USA
Reference: TRS-SSC31/AL
Manufacturer: TRS
Hide that Ugly Starter with our TRS Stainless Steel GY6 Starter Motor Cover comes in a finish but can be easily polished or painted to match your scooter or Powdercoated High gloss Black ! Comes with stainless hardware and aluminum spacers.
Reference: TRS-SSC31/BK
Manufacturer: TRS
Hide that Ugly Starter with our TRS Stainless Steel GY6 Starter Motor Cover comes in a finish but can be easily polished or painted to match your scooter or Powdercoated High gloss Black ! Comes with stainless hardware and aluminum spacers.
Reference: GY6-PM003
Manufacturer: Taida
Upgraded Stator Motor from Taida directly made to work with their famous 232cc.
Reference: 1300-1007
Manufacturer: Scootertuning.ca
A total no-brainer! This kit makes your oil drain bolt magnetically charged to pick up any particles floating in the oil. It's the oldest trick in the book, for good reason--it works! Fits Buddy, Black Cat, Rattler, Kymcos, Lance, Rocketta, Tank, and virtually any other GY6-based engine.
Reference: FLP-004
Manufacturer: FLP
Reference: FLP-010
Manufacturer: FLP
Reference: 1100-1448
Manufacturer: NCY
This high performance bendix is intended for use with high output starter motor. When their awesome powers are combined you'll get more torque and compression, meaning you can compensate for the larger displacement of your kitted GY6 engine.
Reference: BT13841
Manufacturer: Scootertuning.ca
Complete engine gasket set for 125cc GY6 engines with 743mm v-belts (152QMI engines). Set contains all the servicing-relevant gaskets: a cheaper option than buying them all separately. Crank oil seals not included. We offer these as part of a crank seal set. This set can also be used on 150cc variants, but this requires you to order the 150cc head gasket;...
Reference: GY18249
Manufacturer: Scootertuning.ca
Complete engine gasket set for 125/150cc GY6 engines (152QMI). Contains all relevant gaskets. Cheaper than individual purchasing. Does not include engine shaft seals, we offer these as a separate set.
Reference: GY16362
Manufacturer: Scootertuning.ca
Crankcase cover gasket for Chinese-built scooters with GY6 125/150cc engines. The gasket is solely for the short engine blocks of the 4-stroke models. These engines generally take a 743mm v-belt.
Reference: GY17958
Manufacturer: Scootertuning.ca
Crankcase cover gasket for Chinese-built scooters with GY6 125/150cc engines. The gasket is solely for the short engine blocks of the 4-stroke models. These engines generally take a 835mm v-belt.
Reference: NK102.07
Manufacturer: Naraku
Complete set of quality crank oil seals from Naraku, for scooters with 125/150cc GY6 engines. Set contains all the important oil seals found in the engine. A must for engine overhauls. Purchasing individual shaft seals is usually more expensive, and when working on the engine or the gearbox, seals should always be replaced.
Reference: GY16361
Manufacturer: Scootertuning.ca
Right-hand crankcase gasket - GY6 125/150cc
Reference: GY16360
Manufacturer: Scootertuning.ca
Mid-crankcase gasket for GY6 125/150cc engines.
Reference: S6-0250
Manufacturer: Stage6
Even slight blows can damage the ceramic surface or the electrode of a spark plug, but safely stored in this orange Stage6 box, your plug will be well protected from harm and can be taken to events etc. Especially recommendable for expensive racing plugs.
Reference: CR7HSA
Manufacturer: NGK
NGK is one of the world’s leading spark plug manufacturers. As the factory-fitted choice of many vehicle brands, NGK is there when the spark starts to fade. You get an NGK standard spark plug, just like the one fitted to your vehicle. Heating value and plug construction are as the original. The service life of a spark plug depends on the fuel type, engine...
Reference: CR7HIX
Manufacturer: NGK
In addition to the standard spark plugs, we can also offer you special racing spark plugs with very thin electrodes made of platinum or iridium. Recommendable especially for highly tuned engines and when using an inner rotor ignition. The spark is much more stable at high revs and this type of electrode has better self-cleaning features than common CU...
Reference: 1100-1256.1
Manufacturer: NCY
EGR block off plate used for removing EGR system on GY6 engines. Most GY6 scooters have EGR systems often causing massive vacuum leaks that lead to poor performance. When installing this block off plate, it is highly recommended you purchase one of our case vent tubes. You will need to reroute your carburetor vacuum lines when removing PCV system. May not...
Reference: GY14682
Manufacturer: Scootertuning.ca
Starter motor for GY6 125/150cc, supplied with connector cable.
Reference: GY14637
Manufacturer: Scootertuning.ca
As original kick-start shaft. A defective shaft is often the cause of sticking kick-starts, or noises when starting.
Reference: 33950
Manufacturer: Scootertuning.ca
As original kick-start shaft. A defective shaft is often the cause of sticking kick-starts, or noises when starting.
Reference: GY14636
Manufacturer: Scootertuning.ca
Folding kickstarter lever for 125/150cc GY6 4-stroke Chinese-built engines.
Reference: MF16.30020
Manufacturer: Motoforce
This mechanical fuel pump from Olympia is identical to the one from Mikuni, but available for a better price.The output is about 14l/h, which is absolutely sufficient for most 2-stroke engines. Recommendable for all highly tuned engines with big bore carbs (24mm and more).
Reference: RH-187
Manufacturer: Ruckhouse
Mikuni Pulse Fuel Pumps employ an engine’s fluctuation in crankcase pressure to pump fuel from a remote fuel tank to an engine’s carburetor Rectangular fuel pump with 1 outlet for a single carburetor
Reference: SCRUCK
Manufacturer: Scootertuning.ca
Our most popular scooter cover will protect your stretched or lowered scooter from the elements. Super high-quality, water-resistant cover comes with a handy carrying pouch. Includes a soft liner to protect expensive custom paint jobs. Includes heat protective liner for hot vertical exhausts. Built in bungee straps for keeping cover tight on your bike....
Reference: 64300-GEZ-000ZJ
Manufacturer: Honda
Replacement OEM Honda Parts.
Reference: 64300-GGA-600ZA
Manufacturer: Honda
Replacement OEM Honda Parts.
Reference: 81130-GEZ-010ZF
Manufacturer: Honda
Replacement OEM Honda Parts.
Reference: 81130-GEZ-691ZA
Manufacturer: Honda
Replacement OEM Honda Parts.
Reference: 61310-GEZ-670ZA
Manufacturer: Honda
Replacement OEM Honda Parts.
Reference: 53212-GEE-000
Manufacturer: Honda
Replacement OEM Honda Parts.
Reference: 17910-GEZ-670
Manufacturer: Honda
Replacement OEM Honda Parts.
Reference: 45450-GEZ-671
Manufacturer: Honda
Replacement OEM Honda Parts.
Reference: 43450-GEZ-672
Manufacturer: Honda
Replacement OEM Honda Parts.
Reference: 53175-GGA-305
Manufacturer: Honda
Replacement OEM Honda Parts.
Reference: 53178-GGA-305
Manufacturer: Honda
Replacement OEM Honda Parts.
Reference: 61330-GEZ-671
Manufacturer: Honda
Replacement OEM Honda Parts.
Reference: 34901-MJ6-732
Manufacturer: Honda
Replacement OEM Honda Parts.
Reference: 34906-425-771
Manufacturer: Honda
Replacement OEM Honda Parts.
Reference: 34905-268-671
Manufacturer: Honda
Replacement OEM Honda Parts.
Reference: 44830-GEZ-020
Manufacturer: Honda
Replacement OEM Honda Parts.
Reference: 35012-GEZ-691
Manufacturer: Honda
Replacement OEM Honda Parts.
Reference: 35014-GEZ-612
Manufacturer: Honda
Replacement OEM Honda Parts.
Reference: 17620-GEV-762
Manufacturer: Honda
Replacement OEM Honda Parts.
Reference: 50710-GEZ-003
Manufacturer: Honda
Replacement OEM Honda Parts.
Reference: 77100-GEZ-010ZA
Manufacturer: Honda
Replacement OEM Honda Parts.
Reference: 64300-GEZ-J40ZA
Manufacturer: Honda
Replacement OEM Honda Parts.
Reference: 81130-GEZ-Y00ZE
Manufacturer: Honda
Replacement OEM Honda Parts.
Reference: 22011-GW0-000
Manufacturer: Honda
Replacement OEM Honda Parts.
Reference: 23210-GEE-711
Manufacturer: Honda
Replacement OEM Honda Parts.
Reference: 14751-GEE-000
Manufacturer: Honda
Replacement OEM Honda Parts.
Reference: 15100-GET-000
Manufacturer: Honda
Replacement OEM Honda Parts.
Reference: 15133-GET-A20
Manufacturer: Honda
Replacement OEM Honda Parts.
Reference: 16800-GET-831
Manufacturer: Honda
Replacement OEM Honda Parts.
Reference: 18291-GET-000
Manufacturer: Honda
Replacement OEM Honda Parts.
Reference: 19151-GET-010
Manufacturer: Honda
Replacement OEM Honda Parts.
Reference: 22100-GCH-000
Manufacturer: Honda
Replacement OEM Honda Parts.
Reference: 22350-GBL-J21
Manufacturer: Honda
Replacement OEM Honda Parts.
Reference: 22401-GEE-710
Manufacturer: Honda
Replacement OEM Honda Parts.
Reference: 22535-GBL-305
Manufacturer: Honda
Replacement OEM Honda Parts.
Reference: 22804-148-000
Manufacturer: Honda
Replacement OEM Honda Parts.
Reference: 23215-GBL-J30
Manufacturer: Honda
Replacement OEM Honda Parts.
Reference: 23220-GEE-711
Manufacturer: Honda
Replacement OEM Honda Parts.
Reference: 23237-GCH-000
Manufacturer: Honda
Replacement OEM Honda Parts.
Reference: 23238-GCH-000
Manufacturer: Honda
Replacement OEM Honda Parts.
Reference: 35020-GEZ-671
Manufacturer: Honda
Replacement OEM Honda Parts.
Reference: 35130-GEZ-672
Manufacturer: Honda
Replacement OEM Honda Parts.
Reference: 38301-GET-671
Manufacturer: Honda
Replacement OEM Honda Parts.
Reference: 44301-GEZ-00
Manufacturer: Honda
Replacement OEM Honda Parts.
Reference: 80151-GEZ-640ZA
Manufacturer: Honda
Replacement OEM Honda Parts.
Reference: 81130-GEZ-010ZV
Manufacturer: Honda
Replacement OEM Honda Parts.
Reference: 88210-GAZ-305
Manufacturer: Honda
Replacement OEM Honda Parts.
Reference: 88220-GAZ-305
Manufacturer: Honda
Replacement OEM Honda Parts.
Reference: 90304-GE8-003
Manufacturer: Honda
Replacement OEM Honda Parts.
Reference: 90305-197-013
Manufacturer: Honda
Replacement OEM Honda Parts.
Reference: 90442-044-000
Manufacturer: Honda
Replacement OEM Honda Parts.
Reference: 90454-GB2-000
Manufacturer: Honda
Replacement OEM Honda Parts.
Reference: 53140-GET-305ZB
Manufacturer: Honda
Replacement OEM Honda Parts.