No products
High-quality replacement gudgeon pin circlips from Malossi for 10mm and...
The HAT weights are very durable and self lubricating. Available in a...
Pro Taper is well known for manufacturing high-quality grips and...
Budget weights by Motoforce, choice of weights. Available in a range of...
Replacement reed valve gasket for all Minarelli Horizontal engines.
The thermal grade of the spark-plug is of prime importance with tuning...
We can offer high-quality exhaust gaskets for all common original, sport...
The Malossi Scooter Racing MHR exhausts have been conceived and...
The most powerful thermal unit ever produced by Malossi: over 32 HP at...
The Malossi crankshaft for the 100 cc cylinder is primarily composed of...
Reference: DD09
Brand: MVT
This is the ignition of the French Champion 2009 in the 80cc class! The Digital Direct Premium internal rotor ignitions from MVT feature an orange stator and the original water pump and fan drive at the rotor. It allows for keeping the original water pump and/or original fan. Furthermore, this is the only ignition that lets you connect an electric water...
Reference: 166.0076
Brand: Polini
(10mm Gudgeon pin). The Polini Sport 70cc is a very durable high-performance cast iron cylinder for everyday use. This kit is known for its impressive top speed considering the category it belongs to, and even more for its excellent performance at low and mid rpm range. The perfect cylinder if you want to pull wheelies! It can be used with the original...
Reference: 282.0002
Brand: Polini
High-quality NTN 6204 C4 Crankshaft bearings available from the Polini's factory. Include 2 Viton oil seals with 2 crankshaft bearings.
Reference: P400130444005
Brand: Athena
Especially with high-performance engines you should not be too stingy when it comes to buying crankshaft bearings. Kit include oil seal.
Reference: P400130444001
Brand: Athena
The version with polymer plastics cage has higher elasticity and a reduced friction coefficient as compared to the metal ball cage. This is also the type of bearing that we prefer for our racing engines. What is important for these bearings are the right ignition timing and carburettor settings, since these bearings should not be subjected to more than...
Reference: 215.0425
Brand: Polini
Polini also offer a two-part intake manifold, consisting of a base plate and a flexible, angled rubber part, which will be squeezed between base plate and engine intake. The manifolds come with different passage and union diameters and are available for all common Dellorto, PWK, Mikuni and Keihin carburettors.
Reference: DEL-2632
Brand: Dellorto
Dellorto 21mm carburetor. Recommended for sport and midrace engines, as the carburetor is easier to tune than the original. Flat spots and idling problems become a thing of the past. An absolute must for 70cc cylinder kits! Only the correct size carburetor can ensure the required cylinder cooling, which avoids expensive damaged to the bore. The carburetor...
Reference: DEL-2696
Brand: Dellorto
Black cataphoresis painted body. Aluminium screw on top cover. Oil feed connection. Vacuum take off for fuel switch or balancing if used as part of multiple carburettor setup. M32 x 1.25 threaded air intake connection, fitted with air intake adaptor / short trumpet. Rubber sleeve type engine connection to suit 25mm stub. Cable type choke mechanism fitted,...
Reference: 12-UP4152ST
Brand: Uni
High Quality Dual Layer air filter made by UNI. Uni Universal Air Filters is where it all started over 40 years ago. Make a trick filter that clamps directly to the carburetor. For use on motorcycles, go-karts, tractors, air compressors, snowmobiles, anything with a carburetor can benefit from a Uni.
Reference: 314-4184
Brand: Uni
High Quality Dual Layer air filter made by UNI. Uni Universal Air Filters is where it all started over 40 years ago. Make a trick filter that clamps directly to the carburetor. For use on motorcycles, go-karts, tractors, air compressors, snowmobiles, anything with a carburetor can benefit from a Uni.
Reference: 314-4153
Brand: Uni
High Quality Dual Layer air filter made by UNI. Uni Universal Air Filters is where it all started over 40 years ago. Make a trick filter that clamps directly to the carburetor. For use on motorcycles, go-karts, tractors, air compressors, snowmobiles, anything with a carburetor can benefit from a Uni.
Reference: 314-4183
Brand: Uni
High Quality Dual Layer air filter made by UNI. Uni Universal Air Filters is where it all started over 40 years ago. Make a trick filter that clamps directly to the carburetor. For use on motorcycles, go-karts, tractors, air compressors, snowmobiles, anything with a carburetor can benefit from a Uni.
Reference: 12-NU3215
Brand: Uni
Uni Filter street bike air filters are a direct factory replacement air filter and are designed to fit perfectly into your stock airbox. They provide unsurpassed airflow, dirt stopping and overall performance.
Reference: S410000350001
Brand: Athena
Athena offers a wide range of variators and torque drivers for scooters and maxi-scooters. The choice of materials, together with the specific design of the roller sliding lanes, guarantees an optimisation of the engine power at each rotation rate by extending the acceleration and the highest velocity with only a small loss of power and engine torque....
Reference: 249.051
Brand: Polini
Different from the 2G Evolution, Polini's 3G ForRace clutch has still been equipped with 2 shoes, but now it also comes with 3 shoes. Clutch engagement can be adjusted by exchanging the supplied springs. For fine adjustment, it is done with the help of a hex key wrench from the side. However, the springs haven't been positioned to face the front. So if...
Reference: 263880
Brand: Doppler
Taller gears in the transmission reduce the overall reduction factor of the gearbox. If the engine is powerful enough to pull the taller gears, this modification will also raise top speed. Only use with tuning kits! Original cylinders are normally not powerful enough to pull this sort of gearing. Must be combined with a M10x1.00 hex nut.
Reference: YA-S002
Brand: Yasusu
High quality replacement shock absorber made by Yasusu, Taiwan based factory. Stiffness can be adjusted by twisting the bottom end of the shocks. The T1 model is available in black with the red or black spring.
Reference: S6-SSP630-2L/
Brand: Stage6
There aren't that many high-quality mirrors in F1 look on the market, but now the Stage6 Styling Department has taken care of this problem. The results are mirrors that sport an unobtrusive Stage6 logo; with real mirror glass, ball joint with wide adjustment range and in first-rate colour versions. Fitting for all scoots with M8 thread; for Peugeot...
Reference: S6-SSP630-2R/
Brand: Stage6
There aren't that many high-quality mirrors in F1 look on the market, but now the Stage6 Styling Department has taken care of this problem. The results are mirrors that sport an unobtrusive Stage6 logo; with real mirror glass, ball joint with wide adjustment range and in first-rate colour versions. Fitting for all scoots with M8 thread; for Peugeot...
Reference: STR-003.00/
Brand: Str8
This downhill handlebar has a cool, shot-peened look and is available in a choice of colours. Ends are open so as to allow for fitting anti-vibration handlebar weights. The fitting handlebar clamp can be ordered here for some models; if yours is not included in our product range, you can also search in bicycle shops for a fitting clamp with reduction...
Reference: CGN4400
Brand: Tun'R
This downhill handlebar has a cool, shot-peened look and is available in a choice of colours. Ends are open so as to allow for fitting anti-vibration handlebar weights. The fitting handlebar clamp can be ordered here for some models; if yours is not included in our product range, you can also search in bicycle shops for a fitting clamp with reduction shim.
Reference: SCT-HGPT
Brand: Pro Taper
Pro Taper is well known for manufacturing high-quality grips and Handlebar. With the MX design, Protaper now offers a grip in a classical shape. Ideal for all common downhill handlebars as well as all other handlebars.
Reference: 47526
Brand: Doppler
Top quality CNC-cut aluminium kickstart pedal by French manufacturer Doppler that will add some racing style to your ride.
Reference: 480412
Brand: Tun'R
Beautiful F1-look mirror with real mirror glass and a short body. Fits both left and right side, as it comes with a fitting piece to adapt to left hand thread. Fits all scooters with M8 thread size and is available in a choice of colours. New enhanced quality and brighter colours!
Reference: SCT-B1S015/BK
Brand: Scootertuning.ca
We offer here 100% bolt on stand for Yamaha Bws/Zuma 2002-2011. This stand directly work without any modifications, no cutting, no welding. You simply install the stand with the ''U'' Bolt supplied and it's ready to use!
Reference: 317-623
Brand: SCOTT
The Grip S II is a dual density grip with a soft density diamond pattern surrounding a rm density core and end cap. The raised diamond texture offers incredible grip while the soft compound helps reduce armand hand fatigue. Included grip donuts help reduce abraison and thunb blisters. This grip is a top choice amonmgst many top racers and weekend warriors...
Reference: SCT-S12
Brand: Scootertuning.ca
This illuminated Analog speedometer will directly fit on your original speedometer cable without any modification for most of scooter model. Easy and quick installation! The perfect match with STR8 handlebar fastener. (D=6cm)
Reference: 133-507
Brand: Durabatt
Also known as Maintenance Free, this is a very popular type of battery and it has the widest range of applications. All Durabatt Sealed batteries are made with absorbed-glass mat (AGM) technology that eliminates water loss, permitting the battery to be permanently sealed once it’s filled with acid. Holds charge three times longer than conventional...
Reference: 133-102
Brand: Durabatt
Also known as Maintenance Free, this is a very popular type of battery and it has the widest range of applications. All Durabatt Sealed batteries are made with absorbed-glass mat (AGM) technology that eliminates water loss, permitting the battery to be permanently sealed once it’s filled with acid. Holds charge three times longer than conventional...
Reference: D1101/BK
Brand: Adelin
We can offer here complete brake master cylinder and cable lever unit for scooter with front disc brake and rear drum brake. Great part with Stage6 switch unit on zuma! Available in black and aluminium color. This part are also available in complete hydrolic set for scooter with rear disc brake.
Reference: IRC01-00
Brand: IRC
IRC high quality dual-Purpose scooter tires that provide good traction on street.
Reference: 01-041
Brand: Shinko
The SR426 is a quality alternative OEM replacement for Yamaha Zuma scooters or other models with 10 inch front and rear tires. Tubeless, 4 ply construction.
Reference: 0340-PI
Brand: Pirelli
Le Pirelli Angel offre de la mobilit? urbaine Excellent confort, performances optimales sur sol mouill? et maniabilit? pour la jungle urbaine, Confort ?lev? gr?ce ? l'action combin?e de structures rigides et de la conception de la bande de roulement, Nouveau compos? , Maniabilit? urbaine dynamique gr?ce au nouveau contour multi-rayons permettant un...
Reference: 451580
Brand: Tun'R
Tun'r offer here glue-on indicators ''Raindrop'. Stylish drop-shaped signal lights that can be glued to every smooth surface.
Reference: HOODYS6/
Brand: Stage6
New editions of the coveted hoodies with Stage6, Stage6 R/T and “Scootertuning is not a crime” logos are now available. The logos are screen-printed on the front. Material: 65% cotton, 35% polyester