No products
High-quality replacement gudgeon pin circlips from Malossi for 10mm and...
The HAT weights are very durable and self lubricating. Available in a...
Pro Taper is well known for manufacturing high-quality grips and...
Budget weights by Motoforce, choice of weights. Available in a range of...
Replacement reed valve gasket for all Minarelli Horizontal engines.
The thermal grade of the spark-plug is of prime importance with tuning...
In order to offer optimal handling, a dragrace handlebar should be...
The thermal grade of the spark-plug is of prime importance with tuning...
The transmission bearings of a Minarelli crankcase are mounted in the...
This piston ring set for 88cc GY6 cylinders (52mm bore) is specially...
Replacement Malossi Piston for 88cc Malossi cylinder GY6 50cc
Complete cylinder gasket set for 52mm Malossi 4-stroke cylinder sets Kit...
Replacement silencer for Exhaust Stage6 R/T FL 100cc RC-ONE / P.R.E
It is a classic racing exhaust made of carefully hand-welded thin steel...
The water pump cover "EXTREM CUT"...
Reference: BPR7HS-6422
Brand: NGK
The thermal grade of the spark-plug is of prime importance with tuning kits; if the wrong grade is used the kit will overheat or the spark-plug will foul. A hotter spark plug transfers more heat to the cyl head, which may lead to piston seizures. The Corsa kit comes with the correct spark-plug, for other kits we recommend the plug listed here. As a rule...
Reference: EB067
Brand: Easyboost
The transmission bearings of a Minarelli crankcase are mounted in the engine casing without the possibility to remove them if you don't have the right tool. To solve this problem, Easyboost has developed an economical transmission bearing puller, specially designed for all Minarelli crankcases. Thanks to its innovative design, the extraction of the...
Reference: 3513253
Brand: Malossi
This piston ring set for 88cc GY6 cylinders (52mm bore) is specially manufactured for the 88cc Malossi 4-stroke cylinder (3113243).
Reference: MF40.00501
Brand: Motoforce
Reference: 3413245
Brand: Malossi
Replacement Malossi Piston for 88cc Malossi cylinder GY6 50cc
Reference: 1113391B
Brand: Malossi
Complete cylinder gasket set for 52mm Malossi 4-stroke cylinder sets Kit contains all necessary gaskets from the base upwards and is exactly suited to the Malossi 52mm cylinder sets.
Reference: S6-96ET036
Brand: Stage6
Replacement silencer for Exhaust Stage6 R/T FL 100cc RC-ONE / P.R.E
Reference: S6-9616621
Brand: Stage6
It is a classic racing exhaust made of carefully hand-welded thin steel sheet cones, made in Italy. As is normal for high-end systems, the exhaust has a so-called racing finish, which means the body is unpainted and untreated. We recommend to apply grease spray regularly to avoid premature rusting. The exhaust comes with a high quality carbon silencer....
Reference: STR-545.06/
Brand: Str8
Valve Caps Piston, custom valve caps to add a bit of style to your ride. The piston-shaped caps will add a nice dash of colour. Set of 2, available in several colours.
Reference: S6-0533/HL
Brand: Stage6
For Stage6 fans: Sticker with great-looking hologram effect. Pimp your ride (or cell phone case or whatever comes your way) with cool stickers from your favorite brand.
Reference: S6-0534/HL
Brand: Stage6
For Stage6 fans: Sticker with great-looking hologram effect. Pimp your ride (or cell phone case or whatever comes your way) with cool stickers from your favorite brand.
Reference: MF12.00009
Brand: Motoforce
This inexpensive spare part adds a cool touch to your scooter. The lead is made of a rubber compound that is a bit softer than the one of the standard lead, so it can be stored away more easily.
Reference: MF26.16610
Brand: Motoforce
If you want to replace your original cylinder with a more powerful and equally reliable model and not spend too much money on it, this Motoforce kit is a great choice. The MotoForce Racing 70cc cylinder is made of cast iron and features 5 transfer ports, a simple exhaust port and comes with a 2-ring piston with 47 mm diameter and a high compression...
Reference: EB009
Brand: Easyboost
The Easyboost piston ring pliers make it easy to replace the piston ring(s) without the risk of breaking or scratching. When fitting the ring(s) to the piston, it is very common to scratch it. The piston is usually made of an aluminium alloy, which makes it light but fragile. To overcome this problem, Easyboost has developed a special clamp for small...
Reference: 187532
Brand: Teknix
Replacement Drive Belt for Piaggio Long engine
Reference: S6-4081/OR
Brand: Stage6
The popular digital speedometer from Stage6 R/T received an upgrade: the MK 2 version of the Stage6 R/T multifunction dashboard instrument can now also display EGT (exhaust gas temperature). The display is backlit, the device measures 100x60x20mm and is run via the 12V on-board voltage. RPM is measured inductively, speed via a magnetic sensor attached to...
Reference: S6-4081/WH
Brand: Stage6
The popular digital speedometer from Stage6 R/T received an upgrade: the MK 2 version of the Stage6 R/T multifunction dashboard instrument can now also display EGT (exhaust gas temperature). The display is backlit, the device measures 100x60x20mm and is run via the 12V on-board voltage. RPM is measured inductively, speed via a magnetic sensor attached to...
Reference: S6-4081/BK
Brand: Stage6
The popular digital speedometer from Stage6 R/T received an upgrade: the MK 2 version of the Stage6 R/T multifunction dashboard instrument can now also display EGT (exhaust gas temperature). The display is backlit, the device measures 100x60x20mm and is run via the 12V on-board voltage. RPM is measured inductively, speed via a magnetic sensor attached to...
Reference: S6-56166ET006
Brand: Stage6
The Stage6 torque drive is a stand-out piece of equipment, offering plenty of options for adjustment. 2 different slots (37? and 40? gradient) for adjusting pulley opening angle and speed which will influence the performance of the transmission.
Reference: S6-56166ET008
Brand: Stage6
The Stage6 torque drive is a stand-out piece of equipment, offering plenty of options for adjustment. 2 different slots (39? and 42? gradient) for adjusting pulley opening angle and speed which will influence the performance of the transmission.
Reference: KH-ET-006
Brand: Keihin
Replacement float bowl screw for PWK carburetors
Reference: S6-7216801
Brand: Stage6
10mm Gudgeon pin) With the 70cc Streetrace grey cast iron cylinder series, Stage6 offers a more economical alternative to the popular SportPro Aluminium cylinder. The transfer port layout has been adopted from the high-performing 70cc SportPro, but slightly modified in order to fulfil the thermal demands of the cast iron cylinder. Stage6 has gone for a...
Reference: MF60.16629
Brand: Motoforce
Replacement Seal Holder
Reference: S6-195020
Brand: Stage6
Stage6 handlebar grips in Stickerbomb look, for a bit of urban style customizing. The new grips combine various Stage6 and Stage6 R/T logos in a wild graffiti design, which is permanently protected by a high-quality transparent coating. The grips are comfortable to hold and have a non-slip coating. The inner flange is reinforced to provide optimum support...
Reference: S6-2216602
Brand: Stage6
The gearbox cover is CNC-machined from high-quality aluminum alloy. High-quality SKF bearings ensure maximum performance and durability. When developing this tuning cover, particular attention was paid to the rigidity and solidity of the gearbox cover. The focus was not on a lightweight gearbox cover, but a stiff and robust cover that offers excellent...
Reference: S6-2216601
Brand: Stage6
The gearbox cover is CNC-machined from high-quality aluminum alloy. High-quality SKF bearings ensure maximum performance and durability. When developing this tuning cover, particular attention was paid to the rigidity and solidity of the gearbox cover. The focus was not on a lightweight gearbox cover, but a stiff and robust cover that offers excellent...
Reference: MOS02681
Brand: Most
Here is the second version of the famous MOST Racing oil pan cap for scooters equipped with a vertical and horizontal Minarelli engine. Notably the MBK Booster, Stunt, Ovetto, Mach G and Nitro, then the Yamaha BWS, Slider, JOG RR and Aerox. Made from high-end CNC aluminum cut from the mass and beautifully anodized, these plugs offer an impeccable finish....
Reference: MOS01058
Brand: Most
Most offers us here its new high-quality oil pan cap cut from solid black anodized aluminum for scooters equipped with a Minarelli engine. With its avant-garde design, there is no doubt that it will be the detail that will make the difference.