No products
High-quality replacement gudgeon pin circlips from Malossi for 10mm and...
The HAT weights are very durable and self lubricating. Available in a...
Pro Taper is well known for manufacturing high-quality grips and...
Budget weights by Motoforce, choice of weights. Available in a range of...
Replacement reed valve gasket for all Minarelli Horizontal engines.
The thermal grade of the spark-plug is of prime importance with tuning...
We can offer high-quality exhaust gaskets for all common original, sport...
The Polini FOR RACE crankshafts are developed to increase the...
The Polini FOR RACE crankshafts are developed to increase the...
Reference: TRS-IA001/AL
Brand: TRS
Running a forward facing carb, and having problems with how high the carburator sits? Some carbs have a problem when angled too high in the front, and this can cause the engine to not run right, and have problems feeding fuel properly! This flange also turns the carb in more to the center of the bike so that when running a fat tire setup, the carb doesn't...
Reference: TRS-IR001/AL
Brand: TRS
Are you running a fatty, and have problems with the intake manifold hitting the frame? Or would you just like the forward-facing carb to sit more on-center in the bike to look better? Then you NEED this product. The CNC cut aluminum clocking flange IS 12.75MM THICK. Install it on your GY6 motor by removing the studs, bolting down the flange, then...
Reference: GY14647
Brand: Scootertuning.ca
Isolator between carb and intake manifold.
Reference: CH-1051
Brand: Chimera
Chimera Engineering silicone intake couplers! Perfect and durable replacement over the rubber couplers, which usually cracks and causes air leak. The Chimera coupler inside diameter is 30mm, which will fit any intake manifold or carburetor inlet that is 29-34mm; such as aluminum GY6 intake manifolds, Honda GET 49cc engines, and much more! Will also work...
Reference: RH-083
Brand: Ruckhouse
Reference: RH-195
Brand: Ruckhouse
The GY6 Intake Manifold Riser and angled clock flange all in one is here! V2 NOW COMES IN 30MM JUST IN CASE YOU WANT TO RUN BIG BORE HEAD No more 2 piece setups that need a gasket to seal. This Intake Manifold Riser can help you get a better fitment!