No products
High-quality replacement gudgeon pin circlips from Malossi for 10mm and...
The HAT weights are very durable and self lubricating. Available in a...
Pro Taper is well known for manufacturing high-quality grips and...
Budget weights by Motoforce, choice of weights. Available in a range of...
Replacement reed valve gasket for all Minarelli Horizontal engines.
The thermal grade of the spark-plug is of prime importance with tuning...
We can offer high-quality exhaust gaskets for all common original, sport...
The Polini FOR RACE crankshafts are developed to increase the...
The Polini FOR RACE crankshafts are developed to increase the...
Voca offer here Wheels replica of the...
Reference: GY16004
Brand: Scootertuning.ca
Chinese-built GY6 125cc carburettor spring for 152QMI
Reference: NK100.74
Brand: Naraku
Repair kit for Chinese GY6 125/150cc 152/157QMI original and Naraku 24mm carburettors. Comes with adjustable needle, needle clip, main jet, pilot jet, float bowl gasket, idle jet, mix adjuster screw with spring. Convenient repair kit as an alternative to a new carb. Supplied as shown.
Reference: BT13984
Brand: Scootertuning.ca
Throttle cable with a 75" total length, 45 degree angle mount. Can be used on both ruckus or gy6 carb. Type II throttle cable is for the models, where the cable is screwed to the handlebar mount. If in doubt, compare the images with your own throttle cable. The length of the supplied component is approximately 190cm.
Reference: GY14206
Brand: Scootertuning.ca
Full Throttle for 125/150cc 4-stroke Chinese-built scooters. The throttle cable has a length of 212cm and fits almost every 125 and 150cc model. We recommend that you measure the original cable and check the detailed photos for accuracy.
Reference: SCT-TC190/PWK
Brand: TRS
78 inch black throttle cable measured from bend to bend. adjuster cable built into cable. see pics for all the details. tested and made in the u.s.a. don't forget to lube all cables with cable lube, wd-40 , or oil. all cables come dry and should always be lubed.
Reference: PWK-TC
Brand: Taida
Throttle cable Taida for use PWK/PB Carburettor on 125 and 150cc GY6 engines (152/157QMI).
Reference: MF16.30020
Brand: Motoforce
This mechanical fuel pump from Olympia is identical to the one from Mikuni, but available for a better price.The output is about 14l/h, which is absolutely sufficient for most 2-stroke engines. Recommendable for all highly tuned engines with big bore carbs (24mm and more).
Reference: TRS-TCCVK
Brand: TRS
Throttle cable with a 75" sleeve, 45 degree angle mount. If you need a longer cable due to that extreme Honda Stretch this is it Can be used on both ruckus or gy6 carb
Reference: TRS-TCS6CVK
Brand: TRS
TRS Stage 6 to CVK throttle cable will allow Stage 6 (SSP) controls to be installed with CVK carburetors. Ideal for those who are upgrading from stock handle controls to Stage 6 or KOSO units. TRS Throttle SSP to CVK throttle cable will also work with other motorcycles or scooters that has the same type of fitting for the carburetor (all Stage 6 or KOSO...
Reference: RH-187
Brand: Ruckhouse
Mikuni Pulse Fuel Pumps employ an engine’s fluctuation in crankcase pressure to pump fuel from a remote fuel tank to an engine’s carburetor Rectangular fuel pump with 1 outlet for a single carburetor
Reference: RW-006
Brand: Rolling Wrench
Are you sick of dealing with your vacuum operated pulse fuel pump? I know! Me too. We have tried everything to try to make those stupid vacuum pumps reliable, from inline one way valves, to the top of the line “Mikuni” pumps. Nothing is as reliable as Honda OEM electric fuel pump. Turn the key on, the fuel pumps. No more cranking over your engine until...
Reference: 16710-GET-013
Brand: Honda
Honda Ruckus OEM Replacement Fuel Pump.