> >>>Variators

Scooter / Motorbike

Accessories

Custom Wheels

Top sellers

All best sellers

New products

Specials

Variators

GY6 standard roller weight : 18x14mm

Variators // Replacement

  • CAD$ 44.99 Out of stock

    Reference: GY14207

    Manufacturer: Scootertuning.ca

    Complete kit of all variator components for all 125cc or 150cc GY6 4-stroke Chinese-built 152/157QMI engines. The kit contains: a variator, a set of 18x14mm 12,5g variator rollers (x6), 3x sliders for the variator plate and a pulley. Supplied as shown.

    CAD$ 44.99
    Add to cart More
    Out of stock
    Add to Compare

Variators // Sport

Variators // Sport Drive Belt

Variators // Racing Drive Belt

  • CAD$ 37.99 In stock

    Reference: NK900.73

    Manufacturer: Naraku

    NARAKU high-quality belts. Top Quality design from the biggest belt manufacturer in the world. On most brands of scooters the vehicles are already factory-fitted with a very good and durable belt. Usually an extremely expensive item, but here at a reasonable price. High grip combined with good flex minimise friction losses and transmit the engines power...

    CAD$ 37.99
    Add to cart More
    In stock
    Add to Compare
  • CAD$ 39.99 In stock

    Reference: NK900.72

    Manufacturer: Naraku

    NARAKU high-quality belts. Top Quality design from the biggest belt manufacturer in the world. On most brands of scooters the vehicles are already factory-fitted with a very good and durable belt. Usually an extremely expensive item, but here at a reasonable price. High grip combined with good flex minimise friction losses and transmit the engines power...

    CAD$ 39.99
    Add to cart More
    In stock
    Add to Compare

Variators // Front Pulley

Variators // Roller Weight

  • CAD$ 33.99 In stock

    Reference: 6614705.A0

    Manufacturer: Malossi

    For optimum engine setting, Vario weights should be used. The high quality finish of the Malossi roller weights result a high stability and a self-lubricating effect. They are available in different weight selection. The set consists of 6 or 8 rolls, depending on the model.

    CAD$ 33.99
    More
    In stock
    Add to Compare
  • CAD$ 17.99 In stock

    Reference: NK918.080

    Manufacturer: Naraku

    Set of 6 (23x18mm) variator weight weights from NARAKU. These high-quality HD [Heavy Duty] weights not only perform very well as a stock weight replacement, but also show their true potential in high-end engines. During production, the inner ring is carefully knurled and only after this is it bonded with the plastic. This prevents the weight material from...

    CAD$ 17.99
    More
    In stock
    Add to Compare
  • CAD$ 24.99 Product available with different options

    Reference: S6-G201

    Manufacturer: Stage6

    6 coated precision weights from Stage6 for maxi variators, in a size of 20x17mm. They are made of durable plastic on a CPT-base. With tolerances of less than 0.05g, these weights are among the most precise on the market. For easier identification, the rollers have size and weight printed on and additionally lasered onto the inner rim.

    CAD$ 24.99
    More
    Product available with different options
    Add to Compare
  • CAD$ 29.99 In stock

    Reference: 6611095.B0

    Manufacturer: Malossi

    HT are made with CPT with a specific formula and their weight is marked on one side.HTRolls represent a technical spare part for the original one, in a complete series of calibrated elements capable of varying your scooter's transmission ratio and perfectly regulating its speed and acceleration. Due to the rotation, the weight of the rollers becomes a...

    CAD$ 29.99
    More
    In stock
    Add to Compare
  • CAD$ 36.99 In stock

    Reference: 1400-1070

    Manufacturer: Scootertuning.ca

    This is probably the best way to go about tuning your CVT transmission! Included in this tuning Kit are 12 sets of 3 rollers, for a total of 36 roller weights. These sets range from 6g to 17g. Combining 2 sets of rollers allows you to tune with a large variance of weights sets! For example: 3x 10g & 3x 11g rollers (alternating weights in variator)...

    CAD$ 36.99
    Add to cart More
    In stock
    Add to Compare

Variators // Torque Drivers

Variators // Torque Spring

  • CAD$ 18.99 In stock

    Reference: 1200-1026.10

    Manufacturer: NCY

    Compression springs do a couple of things. First they supply the pressure to engage the belt. They also determine the rate at which the CVT transmission changes from low to high gear. A 1000rpm spring will go into a higher gear than a 2000rpm spring. This NCY 1000 rpm compression spring is specifically for the GY6. Dimensions: Spring I.D.: 48.5mm / Spring...

    CAD$ 18.99
    Add to cart More
    In stock
    Add to Compare
  • CAD$ 27.99 In stock

    Reference: NK900.75

    Manufacturer: Naraku

    Current Naraku counterpressure springs with different alloying of the spring steel. A necessary addition where engines have been tuned. RPM increases are given, to show the effect on the variator. A 1500 spring increases the variator ratio change point by 1500rpm.

    CAD$ 27.99
    Add to cart More
    In stock
    Add to Compare
  • CAD$ 27.99 In stock

    Reference: NK900.76

    Manufacturer: Naraku

    Naraku Sports Contra Spring V.2 +2000rpm. The current version of the Naraku counter pressure spring uses a modified alloy spring providing better resilience and above average strength. Torque springs are available in packs of 2 or 3 or are available to purchase individually.Replacing the spring is necessary when tuning engines, the idea is to prevent the...

    CAD$ 27.99
    Add to cart More
    In stock
    Add to Compare
  • CAD$ 20.99 In stock

    Reference: 243.076

    Manufacturer: Polini

    Counter pressure spring by Polini for GY6 125/150cc, Kymco, Honda maxi scooters providing a 15% increase in pressure from the oriental spring and is ideally suited for tuning purposes. A stronger spring is necessary once the the power has been increased by tuning and the belt starts to slip. The clutch counter pressure springs works closely with the...

    CAD$ 20.99
    Add to cart More
    In stock
    Add to Compare
  • CAD$ 18.99 In stock

    Reference: 1200-1028.10

    Manufacturer: NCY

    Compression springs do a couple of things. First they supply the pressure to engage the belt. They also determine the rate at which the CVT transmission changes from low to high gear. A 1000rpm spring will go into a higher gear than a 2000rpm spring. This NCY 2000 rpm compression spring is specifically for the GY6. Dimensions: Spring I.D.: 48.5mm / Spring...

    CAD$ 18.99
    Add to cart More
    In stock
    Add to Compare
  • CAD$ 17.99 In stock

    Reference: TH10BGY6125-1000

    Manufacturer: Scootertuning.ca

    Torque springs are important for the transmission set-up. The spring transfers pressure onto the torque driver and so strongly influences the vario's "shifting" characteristics. You'll know that it's necessary to go for a stronger spring when the drive belt keeps slipping, the vario doesn't shift smoothly within the ideal rpm range or the engine keeps...

    CAD$ 17.99
    Add to cart More
    In stock
    Add to Compare
  • CAD$ 17.99 In stock

    Reference: TH10BGY6125-1500

    Manufacturer: Scootertuning.ca

    Torque springs are important for the transmission set-up. The spring transfers pressure onto the torque driver and so strongly influences the vario's "shifting" characteristics. You'll know that it's necessary to go for a stronger spring when the drive belt keeps slipping, the vario doesn't shift smoothly within the ideal rpm range or the engine keeps...

    CAD$ 17.99
    Add to cart More
    In stock
    Add to Compare
  • CAD$ 17.99 In stock

    Reference: TH10BGY6125-2000

    Manufacturer: Scootertuning.ca

    Torque springs are important for the transmission set-up. The spring transfers pressure onto the torque driver and so strongly influences the vario's "shifting" characteristics. You'll know that it's necessary to go for a stronger spring when the drive belt keeps slipping, the vario doesn't shift smoothly within the ideal rpm range or the engine keeps...

    CAD$ 17.99
    Add to cart More
    In stock
    Add to Compare
  • CAD$ 18.99 In stock

    Reference: 1200-1027.10

    Manufacturer: NCY

    Compression springs do a couple of things. First they supply the pressure to engage the belt. They also determine the rate at which the CVT transmission changes from low to high gear. A 1000rpm spring will go into a higher gear than a 2000rpm spring. This NCY 1500 rpm compression spring is specifically for the GY6. Measurements: Wire Diameter: 4.2mm /...

    CAD$ 18.99
    Add to cart More
    In stock
    Add to Compare

Variators // Accessories

Showing 1 - 5 of 5 items
  • CAD$ 205.99 In stock

    Reference: TRS-GY6CVTC/MA

    Brand: TRS

    Get rid on that ugly cast and bulky CVT cover. Our CVT includes a .13" THICK Stainless Steel 'backing plate' to help prevent case cracking along with covering the ugly insides of the stock swingarm, a billet machined decorative front plate, and billet aluminum machined standoffs that hold the decorative plate out from the swingarm for that custom look....

    CAD$ 205.99
    Add to cart More
    In stock
    Add to Compare
  • CAD$ 286.99 In stock

    Reference: TRS-AO1265

    Brand: TRS

    Ultimate GY6 transmission CVT Cover for those big power motors! After the original CVT Cover, There is the NEW Ultimate CVT cover. This CVT Cover still includes a .13" THICK Stainless Steel 'backing plate' to help prevent case cracking, along with covering the ugly insides of the stock swingarm, a billet machined decorative front plate, 6 billet aluminum...

    CAD$ 286.99
    Add to cart More
    In stock
    Add to Compare
  • CAD$ 186.99 Out of stock

    Reference: TRS-RCB072

    Brand: TRS

    Dorbyworks GY6 engine reinforcement stainless steel case brace. Raw high quality stainless steel, no rust!!! Can be high mirror polished or powder coated to match your bike for a custom engine look! Fit both ''A'' and ''B'' case GY6 Long Case.

    CAD$ 186.99
    Add to cart More
    Out of stock
    Add to Compare
  • CAD$ 218.99 In stock

    Reference: RH-196

    Brand: Ruckhouse

    Our CVT includes a .13″ THICK Stainless Steel ‘backing plate’ to help prevent case cracking along with covering the ugly insides of the stock swing arm, a billet machined decorative front plate, and billet aluminum machined standoffs that hold the decorative plate out from the swing arm for that custom look. The plates come RAW, ready for you to paint,...

    CAD$ 218.99
    Add to cart More
    In stock
    Add to Compare
  • CAD$ 238.99 In stock

    Reference: RH-197

    Brand: Ruckhouse

    Our CVT includes a .13″ THICK Stainless Steel ‘backing plate’ to help prevent case cracking along with covering the ugly insides of the stock swing arm, a billet machined decorative front plate, and billet aluminum machined standoffs that hold the decorative plate out from the swing arm for that custom look. The plates come RAW, ready for you to paint,...

    CAD$ 238.99
    Add to cart More
    In stock
    Add to Compare
Showing 1 - 5 of 5 items

Categories

Information

© Copyright 2024 Ruckhouse. All Rights Reserved.

My account