No products
High-quality replacement gudgeon pin circlips from Malossi for 10mm and...
The HAT weights are very durable and self lubricating. Available in a...
Pro Taper is well known for manufacturing high-quality grips and...
Budget weights by Motoforce, choice of weights. Available in a range of...
Replacement reed valve gasket for all Minarelli Horizontal engines.
The thermal grade of the spark-plug is of prime importance with tuning...
We can offer high-quality exhaust gaskets for all common original, sport...
The Polini FOR RACE crankshafts are developed to increase the...
The Polini FOR RACE crankshafts are developed to increase the...
BLACK SERIES is The Two Brothers...
Reference: BT20902
Brand: Scootertuning.ca
The rectifier/controller converts the alternating voltage from the alternator into the DC for the on board computer. This keeps the battery charged and ensures that bulbs do not blow etc. This piece is exposed to extreme temperature loading and can often become damaged. If the rectifier/controller is defective, the battery is constantly empty and on some...
Reference: GY14630
Brand: Scootertuning.ca
Starter relay or starter solenoid for 125/150cc GY6 4-stroke Chinese-built scooters. 2-pin connector.
Reference: GY14631
Brand: Scootertuning.ca
Indicator relays for 125/150cc GY6 4-stroke Chinese-built scooters. 3-pin plug.
Reference: BT25765
Brand: Scootertuning.ca
Low-cost dropping resistor for the lighting system of various 50, 125 and 150cc GY6 4-stroke Kymco and Chinese-built scooters. (5 Watt / 5 Ohm & 20 Watt 5,9 Ohm)
Reference: NK490.01
Brand: Naraku
Naraku puller for alternator magnet wheels. Screws onto the existing rotor thread and is tensioned with the tensioning bolt. Light taps with a hammer on the tensioned bolt help to release the alternator. A very useful tool for this specific job.
Reference: SCT-RR6GY6
Brand: Scootertuning.ca
The rectifier/controller converts the alternating voltage from the alternator into the DC for the on board computer. This keeps the battery charged and ensures that bulbs do not blow etc. This piece is exposed to extreme temperature loading and can often become damaged. If the rectifier/controller is defective, the battery is constantly empty and on some...
Reference: CR7HSA
Brand: NGK
NGK is one of the world’s leading spark plug manufacturers. As the factory-fitted choice of many vehicle brands, NGK is there when the spark starts to fade. You get an NGK standard spark plug, just like the one fitted to your vehicle. Heating value and plug construction are as the original. The service life of a spark plug depends on the fuel type, engine...
Reference: IP32327
Brand: Scootertuning.ca
Replacement rectifier regulator as shown in image. The rectifier controls and changes the AC voltage generated by the alternator used in the electrical system to 12v DC voltage within a certain tolerance to ensure the battery receives is charge and also ensure the bulbs do not burn out. 02601800 / 00168780 / 31600-KS4-770 / 02601800 / 31600-M56-000 /...
Reference: CR7HIX
Brand: NGK
In addition to the standard spark plugs, we can also offer you special racing spark plugs with very thin electrodes made of platinum or iridium. Recommendable especially for highly tuned engines and when using an inner rotor ignition. The spark is much more stable at high revs and this type of electrode has better self-cleaning features than common CU...
Reference: TRS-R5P001
Brand: Scootertuning.ca
The rectifier/controller converts the alternating voltage from the alternator into the DC for the on board computer. This keeps the battery charged and ensures that bulbs do not blow etc. This piece is exposed to extreme temperature loading and can often become damaged. If the rectifier/controller is defective, the battery is constantly empty and on some...