No products
High-quality replacement gudgeon pin circlips from Malossi for 10mm and...
The HAT weights are very durable and self lubricating. Available in a...
Pro Taper is well known for manufacturing high-quality grips and...
Budget weights by Motoforce, choice of weights. Available in a range of...
Replacement reed valve gasket for all Minarelli Horizontal engines.
The thermal grade of the spark-plug is of prime importance with tuning...
We can offer high-quality exhaust gaskets for all common original, sport...
Nice results with an exhaust...
Reference: SCT-KRMH1001
Brand: Ruckhouse
Looking to run a fatty rim on a honda ruckus motor (GET) here's the hub you need. This hub as been modified to directly fit with 4/137 wheel.
Reference: RH-173
Brand: Ruckhouse
Complete Front Hub for Honda Ruckus with Ruckhouse brake disc adaptor. Installation Note: When putting the center axle, some of these are not fitting due to the center bar inside the hub being a hair too small. Hitting the axle with a hammer will knock out bearing. Remove center piece and reinstall bearing. This piece is not needed anyways.
Reference: 1000-1263.10
Brand: NCY
Electroplated front wheel axle by NCY for Ruckus. . Has safety wire / cotter pin provisions (2mm)! Dimension : 12mm X 250mm. Attention, does not fit OEM forks!
Reference: RH-170
Brand: Ruckhouse
Professional Crafted front Billet Hub for 4x90 pattern front wheels with Brake Adapter flange, 3 NCY Titanium finish rotor bolt and 3 Stainless bolts to attach Brake disc adapter plate.
Reference: TRS-ASK
Brand: TRS
This axle spacer kit is to center wheel with aftermarket front hub normally used with Douglas, TRS or other Ruckus wheels. You may have to add (using washer) or remove (file) a couple thousanth off the spacer as we have no control over how far the manufacturer presses the bearing in the hub.
Reference: RH-174
Brand: Ruckhouse
Professional Crafted front Billet Hub for 4x90 pattern front wheels with Brake Adapter flange, 3 NCY Titanium finish rotor bolt and Stainless bolts to attach Brake disc adapter plate.
Reference: FLP-017
Brand: FLP
So you are ready to add new wheels to your ruckus BUT you don’t want to fork out 1000.00 dollars to get a full disk brake set up. This is where our Front Drum Hub comes in. BOLT ON 12 x 4 4X90 or 5x90 wheels. 100 percent bolt on. Speedometer still works. Wheel bolts included. Use you factory wheel spacer. THINGS TO KEEP IN MIND : These only work with the...
Reference: FLP-019
Brand: FLP
Please read the description carefully as this hub doesn’t work for every one. This mount is made for Honda Ruckus with the stock engine. For best fitment use the following wheels specs with 12x8 fatty mount to have every thing line up center . Last photo is an example with this hub installed with the set up mentioned. 12x7 wheel. 4x110 bolt pattern with...
Reference: RH-210
Brand: Ruckhouse
Replacement hub adaptor for the wheel hub v2 TRS