No products
High-quality replacement gudgeon pin circlips from Malossi for 10mm and...
The HAT weights are very durable and self lubricating. Available in a...
Pro Taper is well known for manufacturing high-quality grips and...
Budget weights by Motoforce, choice of weights. Available in a range of...
Replacement reed valve gasket for all Minarelli Horizontal engines.
The thermal grade of the spark-plug is of prime importance with tuning...
We can offer high-quality exhaust gaskets for all common original, sport...
Here is the second version of the famous MOST Racing oil pan cap for...
Most offers us here its new high-quality oil pan cap cut from solid...
Quickly recognizable thanks to the MOST Racing logos on the length and...
Quickly recognizable thanks to the MOST Racing logos on the length and...
MOST Racing offers a clutch bell for scooters with horizontal and...
MOST Racing offers a reinforced transmission belt for MBK scooters with...
Scooter Racing Malossi exhausts are designed and built with one...
Replacement gasket set for Malossi Testa Rossa 70cc Minarelli Horizontal...
Reference: GY15040
Brand: Scootertuning.ca
Alternator stator for GY6 125/150cc machines. There are many variations of this alternator of these engines. They can however be quite easy to identify. There are stators with 6, 8 or 11 coils. Please check which of these you have. The connector cable plug has 3 pins and has 2 additional connector cables with this 8 coil type alternator.
Reference: GY20956
Brand: Scootertuning.ca
Rotor/magnet wheel for alternators. Alternators are currently available with 6 or 8 coils. Please check your original item to check which one you require! Also known as the fly wheel mass - this item is for 6 coil variants.
Reference: IP32577
Brand: Scootertuning.ca
Reinforced starter motor with more power for 125 and 150cc scooters with the GY6 engine. Very good option for use on tuned engines.
Reference: GY14955
Brand: Scootertuning.ca
Grinding and mechanical noises when starting the engine are often a sign that the starter clutch is faulty. The carrier sticks and no longer releases properly. In the worst case scenario, this can be catastrophic for the motor. As many parts of the starter mechanism are inter-connected, they are all subject to a fair bit of wear. Replacing the starter...
Reference: GY16640
Brand: Scootertuning.ca
Gearbox output shaft (wheel shaft) for GY6 125/150cc 4-stroke Chinese-built engines. This version is for vehicles with a rear drum brake. Shaft length 135mm.
Reference: GY14654
Brand: Scootertuning.ca
Gearbox output shaft - long version. For rear wheel mounting. Total length: 197mm, used for vehicles with additional swinging arm on the right-hand side. Generally scooters use 2 rear shocks and a disc brake. Toothing as per original.
Reference: BT80011
Brand: Scootertuning.ca
Oil strainer bolt for GY6 50ccm 139QMB/QMA and 125/150ccm 152/157QMI 4-stroke engines.
Reference: BT14736
Brand: Scootertuning.ca
Oil strainer O-ring bolt – 139QMB/QMA
Reference: BT13857
Brand: Scootertuning.ca
Oil strainer 50cc GY6 139QMB/QMA engines and 125/150cc GY6 152/157QMI.
Reference: BT13856
Brand: Scootertuning.ca
Oil strainer spring for all 50cc GY6 139QMB/QMA 4-stroke engines and 125/150cc 152/157QMI.
Reference: GY18252
Brand: Scootertuning.ca
Fan Wheel for air cooling. This item sits on the alternator rotor and is attached with 4 screws.
Reference: GY15118
Brand: Scootertuning.ca
Original fan cover for 125/150cc GY6 4-stroke Chinese-built engines.
Reference: BT80005
Brand: Scootertuning.ca
Oil dip stick for GY6 50ccm, 125cc and 150cc engines. Includes O-ring.
Reference: IP15427
Brand: Scootertuning.ca
Oil filler plug for Kymco, GY6 50/125/150cc – Silver
Reference: GY14662
Brand: Scootertuning.ca
Complete oil pump for 125/150cc GY6 engines. Delivery as shown.
Reference: GY18250
Brand: Scootertuning.ca
Dowel pin set for 125/150cc GY6 engines. Delivery contains: 6x dowel pins for M8 and 8x dowel pins for M6.
Reference: BT22008
Brand: Scootertuning.ca
Horn for 12V on-board computers. Delivery as shown.
Reference: 1100-1454.5
Brand: NCY
NCY upgrade/replacement dipstick. Give your oil dipstick a stunning look with this titanium finish. Quality upgrade that looks great on your bike.
Reference: GY6-DP-1020
Brand: Taida
Reference: GY6-SC
Brand: Taida
Reference: BT32006
Brand: Scootertuning.ca
Pressure-activated petrol tap with M16 thread for GY6 scooters with metal tanks. Delivery also includes the small pre-filter pipe that sits in the petrol tank. Only suitable for tanks with threaded connection Made in China. Original replacement part for Chinese scooter brands.
Reference: GY14873
Brand: Scootertuning.ca
Pressure-activated petrol tap for 50cc Chinese scooters with plastic tanks (e.g. New models of the Rex RS and Peugeot V-Clic) and most Chinese 4-stroke scooter GY6 125-180cc engines. A petrol tap failure can often lead to starting difficulties and cut-outs whilst riding. When the membrane is stuck, either no, or not enough, fuel passes through. To remedy...
Reference: TFC-013
Brand: TFC
Reference: GY6-PM001-OR-1
Brand: Taida
Reference: TRS-OD19
Brand: TRS
The TRS dipstick is ONE SOLID PIECE not 2 like others. No more worring if you the stick is going to fall in the motor. Give your oil dipstick a stunning look with this TRUE one-piece Dipstick, Quality upgrade that looks great on your bike. Works on all GY6 and Honda Ruckus models. Made here in the USA
Reference: TRS-SSC31/AL
Brand: TRS
Hide that Ugly Starter with our TRS Stainless Steel GY6 Starter Motor Cover comes in a finish but can be easily polished or painted to match your scooter or Powdercoated High gloss Black ! Comes with stainless hardware and aluminum spacers.
Reference: TRS-SSC31/BK
Brand: TRS
Hide that Ugly Starter with our TRS Stainless Steel GY6 Starter Motor Cover comes in a finish but can be easily polished or painted to match your scooter or Powdercoated High gloss Black ! Comes with stainless hardware and aluminum spacers.
Reference: GY6-PM003
Brand: Taida
Upgraded Stator Motor from Taida directly made to work with their famous 232cc.
Reference: 1300-1007
Brand: Scootertuning.ca
A total no-brainer! This kit makes your oil drain bolt magnetically charged to pick up any particles floating in the oil. It's the oldest trick in the book, for good reason--it works! Fits Buddy, Black Cat, Rattler, Kymcos, Lance, Rocketta, Tank, and virtually any other GY6-based engine.
Reference: FLP-004
Brand: FLP
Reference: FLP-010
Brand: FLP
Reference: 1100-1448
Brand: NCY
This high performance bendix is intended for use with high output starter motor. When their awesome powers are combined you'll get more torque and compression, meaning you can compensate for the larger displacement of your kitted GY6 engine.