Drilled frame ports for increased ventilation and fog resistance •...
Innovative frame with maximum airflow vents • Drilled frame ports for...
Fitted stretch backhand panel for lightweight comfort • Notched wrist...
Refined chassis for increased comfort and performance • TPR...
Four-way stretch mesh and expansion panels allow full range of motion in...
Fingertip pattern reduces seams and enhances fingertip sensitivity •...
Allows tactile control of bare hands while wearing gloves • Mechanix...
Work smarter, not harder with The Original® Grip gloves • Palms covered...
Heavy-duty leather construction in the palm, fingers and thumbs •...
Two-way stretch polyester back panel construction for ventilation and...
Lightweight summer glove with multi-material main shell construction •...
Premium leather glove main body • Soft-shell windbreaker material and...
Please note that you will need 1 resistor per side.
Electronic flashlight relays don't have the typical clicking sound known from mechanical relays and are less prone to defects. The relays are ideal to solve the problem of LED indicators that flash too slow, too fast or not at all. Can also be used in combination with standard bulbs. Attention: fit only if there is a single relais for your scooter that...
These mechanical flashlight relays are ideal to solve the problem of LED indicators that flash too slow, too fast, or not at all. Can also be used in combination with standard bulbs. The typical clicking sound of a mechanical relay has been kept. Depending on your scooter model, you may also require the STR8 resistor (STR-667.10) for the LED indicators to...
Looking to add LED Blinkers or brake lights to your scooter? You will need either a set of in-line resistors for the circuit or replace the OEM flasher with our LED FLASHER relay. Comes with instructions. Tested on all LED lights. R6, TurtleHead, LED blinkers etc. You will need to use this LED FLASHER in place of the OEM one under the Battery box.
Load resistor with 25w and 10 ohm for LED indicators. Required for any LED upgrade. The resistor evens out the missing current form the standard light and gaurantees the required flashing frequency. Note: one per side required.
Electronic indicator flasher relay unit with 3 pins for with incandescent and LED indicators. Fits most 2-stroke and 4-stroke scooters, mopeds and quad or ATVs. The flashing frequency automatically adjusts to LED or indicator with standard lamps. Max. 10A.0
Toxik, specialist for tuning parts at affordable prices, designed this STR8LED Strip 30cm blue with segments that can be cut off. Attaching it to your scooter is pretty simple - just cut it down to the length you want and connect to your 12V battery. The 3M self-adhesive tape allows you to safely place the extremely flexible strip anywhere you want. Power...
Flexible water-proof LED light string by style expert STR8. Available in various colours and sizes, 12 LEDs on a 12cm string or 24LEDs on a 25cm string. Mounting them is a piece of cake, simply glue them anywhere you want on your scooter's fairing. You can also drill a 5mm hole to fasten them from the inside. Customizing at its best and definitely...
You changed your license plate holder but are now looking for the lighting required for it to be street-legal? Have a look at this STR8 LED License Plate Light universal. 3 very bright white LEDs make sure that your license plate is legible at all times. Mounted with 2 screws. Measurements: 38 x 20mm
You changed your license plate holder but are now looking for the lightingrequired for it to be street-legal? Have a look at this STR8 LED License Plate Light universal. 4 very bright white LEDs make sure that your license plate is legible at all times. It is glued on. Measurements: 60 x 15mm. CE-marking (street-legal)
Very small, electronic indicator relay with 2 pins for normal indicators with bulbs or LEDs. Suitable for most 2- and 4-stroke scooters, geared mopeds and quads / ATVs. The relay operates from 1-100w and uses less power with small LED indicators.
12V replacement indicator relay / flasher unit. This relay is used in many vehicle brands. It features a 90 ° offset 2-pin connector. For security, please compare your component with that in the image required photo flasher, since year of manufacturer may determine whether a different relay has been used.
High-quality electronic indicator relay for conventional indicators with bulbs, as well as LED indicators. Suitable for most 2-stroke and 4-stroke scooters, geared mopeds, motorcycles and quad / ATVs The flashing frequency adjusts automatically for the LED or standard bulbs. Total output of the relay is up to 150W; more than enough for all types of...
Our Flasher works on Honda Grom and used on Both ATR and DAn Max GY6 Harness. This fixes no flash or hyperflash. Plugs in directly. We need to turn dial to get desired flash rate. Elimates the need for tapping wires to install load resistors. This is NOT for OEM Honda Ruckus must use Resistor or our Relay in related items below.