No products
High-quality replacement gudgeon pin circlips from Malossi for 10mm and...
The HAT weights are very durable and self lubricating. Available in a...
Pro Taper is well known for manufacturing high-quality grips and...
Budget weights by Motoforce, choice of weights. Available in a range of...
Replacement reed valve gasket for all Minarelli Horizontal engines.
The thermal grade of the spark-plug is of prime importance with tuning...
We can offer high-quality exhaust gaskets for all common original, sport...
Here is the second version of the famous MOST Racing oil pan cap for...
Most offers us here its new high-quality oil pan cap cut from solid...
Quickly recognizable thanks to the MOST Racing logos on the length and...
Quickly recognizable thanks to the MOST Racing logos on the length and...
MOST Racing offers a clutch bell for scooters with horizontal and...
MOST Racing offers a reinforced transmission belt for MBK scooters with...
Scooter Racing Malossi exhausts are designed and built with one...
Replacement gasket set for Malossi Testa Rossa 70cc Minarelli Horizontal...
We can offer here Quality fairing for...
Here is all the parts required for Complete GY6 150cc swap.
Reference: SCT-GY6150
Manufacturer: Scootertuning.ca
150cc 4-Stroke Long-Case GY6 Gas Engine with automatic CVT transmission. This scooter engine is used in a wide variety of applications, including full-size street legal scooters, all terrain vehicles (ATVs), dirt bikes, and go karts. Compatible with both 125cc and 150cc engine size scooters and vehicles.
Reference: GY16651
Manufacturer: Scootertuning.ca
Complete replacement 24mm carburettor (membrane type) supplied with electric auto choke. Ready to fit and suitable for 125/150cc Chinese-built engines and 125cc air-cooled Kymco models. This is a Chinese-built carb and matches the quality of the original item. Uses M5 main jets.
Reference: S6-35013BL
Manufacturer: Stage6
More and more air filters come with bigger fitting diameters to optimize the carb’s air flow. We offer you air filters of this design for Mikuni (44mm fitting diameter) and for Stage6 flat-slide/ Keihin (48mm fitting diameter) carburetors. They are available in red and blue and of course can also be used for other carbs with similar fitting diameters....
Reference: S6-35013RO
Manufacturer: Stage6
More and more air filters come with bigger fitting diameters to optimize the carb’s air flow. We offer you air filters of this design for Mikuni (44mm fitting diameter) and for Stage6 flat-slide/ Keihin (48mm fitting diameter) carburetors. They are available in red and blue and of course can also be used for other carbs with similar fitting diameters....
Reference: 12-UP4182ST
Manufacturer: Uni
High Quality Dual Layer air filter made by UNI. Uni Universal Air Filters is where it all started over 40 years ago. Make a trick filter that clamps directly to the carburetor. For use on motorcycles, go-karts, tractors, air compressors, snowmobiles, anything with a carburetor can benefit from a Uni.
Reference: 314-4183
Manufacturer: Uni
High Quality Dual Layer air filter made by UNI. Uni Universal Air Filters is where it all started over 40 years ago. Make a trick filter that clamps directly to the carburetor. For use on motorcycles, go-karts, tractors, air compressors, snowmobiles, anything with a carburetor can benefit from a Uni.
Reference: MF48.00820
Manufacturer: Motoforce
Fuel hose with a length of 1m, interior diameter 5mm. Available in many cool colours. Also perfect to connect your boost bottle.
Reference: VCR-RD13.FUEL/
Manufacturer: Voca
High quality fuel pipe by Voca Racing produced with a high percentage of silicone to ensure a constant quality and avoid dryness.
Reference: SCT-CVK24
Manufacturer: Scootertuning.ca
Complete replacement 24mm carburettor (membrane type) supplied with electric auto choke. Ready to fit and suitable for 125/150cc Chinese-built engines and 125cc air-cooled Kymco models. This is a Chinese-built carb and matches the quality of the original item. Uses M5 main jets.
Reference: S6-35015
Manufacturer: Stage6
The filter is extremely compact and can be installed on most smaller motorcycles and scooters. The air filter comes with an adapter with a straight outlet and an adapter with an outlet angled at 45?, so that it can be installed on (almost) all models. The air filter also comes with adapters / reducers so that it can be mounted on different carburetors....
Reference: S6-0125
Manufacturer: Stage6
Fuel hose with a length of 50cm, interior diameter 6mm
Reference: TRS-IA001/AL
Manufacturer: TRS
Running a forward facing carb, and having problems with how high the carburator sits? Some carbs have a problem when angled too high in the front, and this can cause the engine to not run right, and have problems feeding fuel properly! This flange also turns the carb in more to the center of the bike so that when running a fat tire setup, the carb doesn't...
Reference: RH-083
Manufacturer: Ruckhouse
Reference: RH-195
Manufacturer: Ruckhouse
The GY6 Intake Manifold Riser and angled clock flange all in one is here! V2 NOW COMES IN 30MM JUST IN CASE YOU WANT TO RUN BIG BORE HEAD No more 2 piece setups that need a gasket to seal. This Intake Manifold Riser can help you get a better fitment!
Reference: TRS-HRGWH/PSP
Manufacturer: TRS
PSP plug and play GY6 engine harness will eliminate the need to fuzz around with wiring your engine swaps! Reduce the chances of errors and problems. Pre-labeled and ready to go!
Reference: RW-003
Manufacturer: Rolling Wrench
Here we have the GY6 swap adaptor harness. This harness will allow you to use all of your oem controls, wiring harness, fuel pump, and even kill the engine with the kill switch correctly (unlike most harnesses they are reversed). With the GY6 swap harness you will have your Ruckus running on the GY6 150cc in around 20 min. No splicing, cutting, or...
Reference: RW-005
Manufacturer: Rolling Wrench
Here we have the GY6 swap adaptor harness. This harness will allow you to use all of your oem controls, wiring harness, fuel pump, and even kill the engine with the kill switch correctly (unlike most harnesses they are reversed). With the GY6 swap harness you will have your Ruckus running on the GY6 150cc in around 20 min. No splicing, cutting, or...
Reference: TRS-WHCP
Manufacturer: TRS
Ruckus GY6 Swap Harness component plate is designed to help organize parts like CDI, Flasher Relay Stater relay and Rectifier. You can use it in many configerations based on your harness. Stainless Steel so no rust and no need to powdercoat. Bolts to where OEM ECU used to go.
Reference: TRS-TCS6CVK
Manufacturer: TRS
TRS Stage 6 to CVK throttle cable will allow Stage 6 (SSP) controls to be installed with CVK carburetors. Ideal for those who are upgrading from stock handle controls to Stage 6 or KOSO units. TRS Throttle SSP to CVK throttle cable will also work with other motorcycles or scooters that has the same type of fitting for the carburetor (all Stage 6 or KOSO...
Reference: TRS-TCCVK
Manufacturer: TRS
Throttle cable with a 75" sleeve, 45 degree angle mount. If you need a longer cable due to that extreme Honda Stretch this is it Can be used on both ruckus or gy6 carb
Reference: 0800-1101.10
Manufacturer: NCY
Remplacement Brake Cable for use with Ruckus Frame extension like Composimo, TRS, Ncy, Password JDM .. ect.
Reference: BT13984
Manufacturer: Scootertuning.ca
Throttle cable with a 75" total length, 45 degree angle mount. Can be used on both ruckus or gy6 carb. Type II throttle cable is for the models, where the cable is screwed to the handlebar mount. If in doubt, compare the images with your own throttle cable. The length of the supplied component is approximately 190cm.
Reference: RH-01
Manufacturer: Ruckhouse
Reference: TRS-MFPB/
Manufacturer: TRS
Looking for a stylish way to mount your Mikuni DF-44 Rectangular fuel pump? This is IT. Available in Raw or Anodized
Reference: MF16.30020
Manufacturer: Motoforce
This mechanical fuel pump from Olympia is identical to the one from Mikuni, but available for a better price.The output is about 14l/h, which is absolutely sufficient for most 2-stroke engines. Recommendable for all highly tuned engines with big bore carbs (24mm and more).
Reference: RH-187
Manufacturer: Ruckhouse
Mikuni Pulse Fuel Pumps employ an engine’s fluctuation in crankcase pressure to pump fuel from a remote fuel tank to an engine’s carburetor Rectangular fuel pump with 1 outlet for a single carburetor
Reference: RW-006
Manufacturer: Rolling Wrench
Are you sick of dealing with your vacuum operated pulse fuel pump? I know! Me too. We have tried everything to try to make those stupid vacuum pumps reliable, from inline one way valves, to the top of the line “Mikuni” pumps. Nothing is as reliable as Honda OEM electric fuel pump. Turn the key on, the fuel pumps. No more cranking over your engine until...
Reference: 16710-GET-013
Manufacturer: Honda
Honda Ruckus OEM Replacement Fuel Pump.
Reference: YS-701GY6/CA
Manufacturer: Yoshimura
Custom GY6 Genuine Yoshimura Exhaust with Stainless header. With custom STAINLESS STEEL bracket for Fatty 10 inch 12x7, 12x8 or 13" tire. Comes with all mounting hardware and exhaust plug.
Reference: FMF-SHGY6
Manufacturer: FMF
We offer here Custom FMF Exhaust with Stainless header. Comes with all mounting hardware, Directly designed for GY6 engine with Fatty 7-8'' wheel.
Reference: CH-1044
Manufacturer: Chimera
Chimera High Rise Header for GY6 engines! The Chimera High Rise header has adequate spacing that will allow for 7" fatty, 8" fatty (depending on size of muffler) or non-fatty rear wheel set up! Will fit any GY6 150cc or 125cc engines.
Reference: TBR-T002-F
Manufacturer: Two Brothers Racing
Reference: TBR-C002-F
Manufacturer: Two Brothers Racing
Reference: HL-005
Manufacturer: Hotlap
We worked directly with Hotlap to develop EVEN MORE exclusive GY6 options that you cannot get anywhere else; all with that same HotLap quality. These unique design options allow you to select a style best suited for your own bike, and built specifically for the GY6 with the signature HOTLAP quality. Nice deep growl! This pipe is compatible with 150 and...
Reference: HL-006
Manufacturer: Hotlap
We worked directly with Hotlap to develop EVEN MORE exclusive GY6 options that you cannot get anywhere else; all with that same HotLap quality. These unique design options allow you to select a style best suited for your own bike, and built specifically for the GY6 with the signature HOTLAP quality. Nice deep growl! This pipe is compatible with 150 and...
Reference: HL-007
Manufacturer: Hotlap
We worked directly with Hotlap to develop EVEN MORE exclusive GY6 options that you cannot get anywhere else; all with that same HotLap quality. These unique design options allow you to select a style best suited for your own bike, and built specifically for the GY6 with the signature HOTLAP quality. Nice deep growl! This pipe is compatible with 150 and...
Reference: TRS-CAREXH
Manufacturer: TRS
TRS decided to make an affordable Full Carbon exhaust that performs well and looks great too. WILL NOT WORK ON B-CASE. Comes with 1.25 to 1.5 full stainledd over the fan header. Comes with all hardware and new exhaust gasket.
Reference: SCT-43210-F9-9100
Manufacturer: Scootertuning.ca
Reference: GY15497
Manufacturer: Scootertuning.ca
Some scooters are sent from the factory with two rear shock absorbers. These models mostly use aluminium exhaust systems. These are generally mounted with 2 ring clamps onto a special exhaust bracket on the right-hand side of the engine. The second rear shock is also generally mounted to this bracket. For this reason, this system is only suitable for...
Reference: GY14020
Manufacturer: Scootertuning.ca
Standard original exhaust for GY6 125/150cc engines. There are various exhaust systems for these engines. The main difference is in the mounting of the system. The system listed here is additionally fixed to the engine case on the rear swing arm. Please note the product images. Exhaust system without SLS, but can be used on vehicles with the SLS. In this...
Reference: TRS-EMFWG/GY6
Manufacturer: TRS
TRS offer here Ruckus GY6 125-150 conversion mount. Allows you to run the 12x 7, 12x8 or 10x8 Fatty rim. Comes with an angled clocking flange. Carb must face forward. TRS mount is a SOLID piece of Billet Aluminium so it's super strong. We also include an angled clocking instead of having to purchase one. Brackets are stainless steel.
Reference: SCT-M1400/GY
Manufacturer: Ruckhouse
This kit allows you to pick what look you are going for with your stretch. Either stock looking wheelbase or long wheel base. You will need a 6 inch of steel so you can can make a shock mount, not included. Attention! Shock Mount sold separatly!
Reference: TRS-EMSWG
Manufacturer: TRS
Ruckus gy6 conversion mount. Allows you to run the stock cast OEM GY6 wheels commonly found on the Vento Scooters. 2.5 inch stretch kit. Our mount is a SOLID piece of 6061-T6 BILLET ALUMINUM and 100% Made right here in the USA. Brackets are Stainless Steel.
Reference: 1000-1293.10
Manufacturer: NCY
This Low Down Shock is constructed of an anodized black billet body, 550lbs/in coil, and features an adjustable length and spring pre-load. Give your scooter the aggressive stance it deserves with this black on black rear shock. This shock is extremely popular with Honda Ruckus owners that want to go as low as possible. Drop your scooter an extra 1.5in...
Reference: SCT-LS001/BK
Manufacturer: Ruckhouse
This Low Down Shock is constructed of an anodized black billet body, 550lbs/in coil, and features an adjustable length and spring pre-load. Give your scooter the aggressive stance it deserves with this black on black rear shock. This shock is extremely popular with Honda Ruckus owners that want to go as low as possible. Drop your scooter an extra 1.5in...
Reference: SCT-LS001/AL
Manufacturer: Ruckhouse
This Low Down Shock is constructed of an anodized black billet body, 550lbs/in coil, and features an adjustable length and spring pre-load. Give your scooter the aggressive stance it deserves with this rear shock. This shock is extremely popular with Honda Ruckus owners that want to go as low as possible. Drop your scooter an extra 1.5in with this shock.
Reference: SCT-LS012/AL
Manufacturer: Ruckhouse
This Low Down Shock is constructed of an anodized black billet body, 550lbs/in coil, and features an adjustable length and spring pre-load. Give your scooter the aggressive stance it deserves with this rear shock. This shock is extremely popular with Honda Ruckus owners that want to go as low as possible. Drop your scooter an extra 1.5in with this shock.
Reference: TH38ADIO-01
Manufacturer: Ruckhouse
Reference: TH38ADIO-02
Manufacturer: Ruckhouse
This Low Down Shock is constructed of an anodized black billet body, 550lbs/in coil, and features an adjustable length and spring pre-load. Give your scooter the aggressive stance it deserves with this black on black rear shock. This shock is extremely popular with Honda Ruckus owners that want to go as low as possible. Drop your scooter an extra 1.5in...
Reference: TH38ADIO-03
Manufacturer: Ruckhouse
This Low Down Shock is constructed of an anodized black billet body, 550lbs/in coil, and features an adjustable length and spring pre-load. Give your scooter the aggressive stance it deserves with this black on black rear shock. This shock is extremely popular with Honda Ruckus owners that want to go as low as possible. Drop your scooter an extra 1.5in...
Reference: TH38ADIO-04
Manufacturer: Ruckhouse
This Low Down Shock is constructed of an anodized black billet body, 550lbs/in coil, and features an adjustable length and spring pre-load. Give your scooter the aggressive stance it deserves with this black on black rear shock. This shock is extremely popular with Honda Ruckus owners that want to go as low as possible. Drop your scooter an extra 1.5in...
Reference: 1000-1287.10
Manufacturer: NCY
NCY High Performance Grooved Brake Shoes - GY6 High friction grooved linings, efficiency improves with heat. NCY Blue Series brake shoes are made using high pressure Die cast aluminum platforms with bonded brake linings. All shoes are radius ground and edge trimmed and also feature lead in and lead out chamfers at lining ends and original equipment style...
Reference: S802-343/AL
Manufacturer: Ruckhouse
Looking to run a fatty rim on a Honda ruckus with GY6 motor? here's the hub you need. The hub has 4x102, 4x110 & 4x130 bolt pattern that allow to use lot's of Douglas & Aftermaket 12x8 / 12x7 wheels. 4x102 Bolt pattern is already including studs. We recommend our lug nuts to install the wheel. 4x110 and 4x130 Can be used with Regular M10 bolts or...
Reference: SCT-164-30
Manufacturer: Scootertuning.ca
Rear axle nut for GY6 125-150cc Short/Long wheel axle.
Reference: GY16640
Manufacturer: Scootertuning.ca
Gearbox output shaft (wheel shaft) for GY6 125/150cc 4-stroke Chinese-built engines. This version is for vehicles with a rear drum brake. Shaft length 135mm.
Reference: 1000-1131.1
Manufacturer: NCY
High quality electroplated rear axle nut by NCY for GY6 engines.
Reference: SCHS-203
Manufacturer: Ruckhouse
Set of 4 socket screws, Zinc plated grade 12.9 for a rear Fatty wheel combined with a Rear Hub Multi Bolt partern (4x100, 4x110, 4x130).
Reference: GY16359
Manufacturer: Scootertuning.ca
Gasket for the gearbox cover on GY6 125/150cc 4-stroke engines.
Reference: SCT-HCCP1232
Manufacturer: Ruckhouse
These are for our 4/110 wheels. They sandwich between the wheel and your hub for the perfect fit. You won’t be losing this baby down the street. The flange on the outside is only .075 thick so don’t worry about your wheel not lining up. It will probably help line it up better since most mounts on the market hold your engine too far to the left.
Reference: RH-041
Manufacturer: Ruckhouse
Stop running car lug nut on a Flat Douglas or Custom Ruckus wheel! They do not allow proper tightening due to lack of surface area and over time they will wallow out the wheel holes. We got the fix!! Our lug nuts are flat for proper surface area on most flat wheels such as Douglas or any of our wheel sets. These are M12x 1.5 thread pitch please check your...
Reference: RH-048
Manufacturer: Ruckhouse
Reference: RH-188
Manufacturer: Ruckhouse
These lugs allow you to run our M12x1.5 Flat Lug Nuts with a Gy6 Rear Hub with M10x1.5 bolt hole. No need to drill and tap your hub or open the hole on your wheel . Most wheel come with M10 holes not M12 . Put wheel on with these, insert washer then Flat Lug Nut and you now have the look of Lugs without any mods. We recommend Red Loctite on both hub and...
Reference: FLP-013
Manufacturer: FLP
Safely mount your custom 1 piece wheels and use off the shelf metric lug nuts and have them seat up properly. Don’t risk you lug nuts coming loose with minimal surface contact on your flat faces wheels. Specs : 4 pieces 6061 washers, Made for M12 stud, 60 degree taper to fit all metric lug nuts.
Reference: FLP-014
Manufacturer: FLP
Safely mount your custom 1 piece wheels and use off the shelf metric lug nuts and have them seat up properly. Don’t risk you lug nuts coming loose with minimal surface contact on your flat faces wheels. Specs : 4 pieces 6061 washers, Made for M12 stud, 60 degree taper to fit all metric lug nuts.
Reference: S802-343/BK
Manufacturer: Ruckhouse
Looking to run a fatty rim on a Honda ruckus with GY6 motor? here's the hub you need. The hub has 4x102, 4x110 & 4x130 bolt pattern that allow to use lot's of Douglas & Aftermaket 12x8 / 12x7 wheels. 4x102 Bolt pattern is already including studs. We recommend our lug nuts to install the wheel. 4X110 and 4x130 Can be used with Regular M10 bolts or our M10...
Reference: RH-204
Manufacturer: Ruckhouse
Reference: DG128354110
Manufacturer: Douglas
Douglas 12X8 3+5 Offset Polished Rims with 4/110 bolt pattern. Must use an GY6 4/110 hub or similar. This wheel is for Ruckus with GY6 engine with Fatty Engine Mount. Please choose if you want hub cap include or not.
Reference: SCT-F011/12
Manufacturer: Scootertuning.ca
Replacement 12x4'' front wheel for most of GY6 150cc scooter. Made for 12mm wheel axle. Disc Brake Pattern : 3x75.
Reference: SCT-R021/12
Manufacturer: Scootertuning.ca
Replacement 12x4'' rear wheel for most of GY6 150cc scooter with rear drum brake.
Reference: SCT-W034/12
Manufacturer: Scootertuning.ca
Rear wheel 12x3.5'' for GY6 150cc engine using 4x90mm rear hub. This wheel can also be used as front wheel with our 4x90 fron hub. Attention! 4X90mm hub required!
Reference: 0340-0011
Manufacturer: Michelin
This Michelin tire with a unique profile provides optimum grip and performance at an economical price.
Reference: IRC01-00
Manufacturer: IRC
IRC high quality dual-Purpose scooter tires that provide good traction on street.
Reference: 97-
Manufacturer: Duro
Sport scooter tires with a stylish profile. Large contact patch provides excellent grip
Reference: 98-119
Manufacturer: Kenda
Chunky, aggressive design for street-oriented dual-sports. Original equipment tires on models from several major manufacturers. Gravel and fire. road performance while maintaining excellent street manners. Long tread life for one of the best value motorcycle tires on the market
Reference: 98-1042
Manufacturer: Kenda
Calling all adventurers! We’ve got the road companion you’ve been seeking. Meet Kenda’s all-new Big Block adventure bike tires. Designed specifically to meet the demands of the motorcycle purists and the thrill riders, alike, these adventure motorcycle tires will support you on the streets as well as the trails. They’ve got powerful puncture resistance...
Reference: 0340-PI
Manufacturer: Pirelli
Le Pirelli Angel offre de la mobilit? urbaine Excellent confort, performances optimales sur sol mouill? et maniabilit? pour la jungle urbaine, Confort ?lev? gr?ce ? l'action combin?e de structures rigides et de la conception de la bande de roulement, Nouveau compos? , Maniabilit? urbaine dynamique gr?ce au nouveau contour multi-rayons permettant un...