No products
High-quality replacement gudgeon pin circlips from Malossi for 10mm and...
The HAT weights are very durable and self lubricating. Available in a...
Pro Taper is well known for manufacturing high-quality grips and...
Budget weights by Motoforce, choice of weights. Available in a range of...
Replacement reed valve gasket for all Minarelli Horizontal engines.
The thermal grade of the spark-plug is of prime importance with tuning...
We can offer high-quality exhaust gaskets for all common original, sport...
We can now introduce the STR8 Mirror Set Street II. The sporty, sleek...
CNC-machined and high-quality anodized HQ seal installation tool that...
Extension cable for the sensor of the Stage6 exhaust gas temperature...
Stainless steel clamp for Koso EGT (Exhaust Gas Temperature) sensor,...
This is the ignition of the French...
Reference: CMO_7_1500_Raw
Manufacturer: Composimo
Front Scooter Fork Adapters for the Honda Grom! These adapters are what you need if you want to bring a whole new look and aggressive feel to your Honda GROM! The Scooter Fork Adapters allow you to install an front fork RRGS/NCY Ruckus-style Fork Assembly on your Grom. ***Warning: This setup WILL require a decent bit of modification, and because of the...
Reference: ST-LOWFK-BK
Manufacturer: Ruckhouse
We offer here slammed low down fork legs for Honda Ruckus. Attention! You can only use this fork with front disc brake convertion, Ruckus oem fork and wheel are made for Drum brake. The perfect match with TRS front Hub, TRS front wheel, Adelin 220mm Disc Brake, RRGS Caliper bracket and finally Adelin 4 Pistons Caliper. Fork lenght : 300mm / Shaft Diameter...
Reference: ST-LOWFK-AL
Manufacturer: Ruckhouse
We offer here slammed low down fork legs for Honda Ruckus. Attention! You can only use this fork with front disc brake convertion, Ruckus oem fork and wheel are made for Drum brake. The perfect match with TRS front Hub, TRS front wheel, Adelin 220mm Disc Brake, RRGS Caliper bracket and finally Adelin 4 Pistons Caliper. Fork lenght : 300mm / Shaft Diameter...
Reference: ST-LOWFK-RE
Manufacturer: Ruckhouse
We offer here slammed low down fork legs for Honda Ruckus. Attention! You can only use this fork with front disc brake convertion, Ruckus oem fork and wheel are made for Drum brake. The perfect match with TRS front Hub, TRS front wheel, Adelin 220mm Disc Brake, RRGS Caliper bracket and finally Adelin 4 Pistons Caliper. Fork lenght : 300mm / Shaft Diameter...
Reference: 1000-1336.6
Manufacturer: NCY
These NCY fork tubes provide a smoother ride while lowering your front end 51mm! Attention! You can only use this fork with front disc brake convertion, Ruckus oem fork and wheel are made for Drum brake. The perfect match with our front Hub, 12x8 front wheel, Adelin 220mm Disc Brake, Adelin Caliper mount and Adelin 4 Pistons Caliper. Fork lenght : 330mm /...
Reference: RH-181
Manufacturer: Ruckhouse
These Ruckhouse front Fork adapters will drastically lower the front end and work great with the shock lowering brackets giving the bike a whole new look. Comes with fork adapters and a spacer kit which properly centers the stock rim and caliper. These adapters will not work with the larger OEM Ruckus forks or ATR These are designed to install in place of...
Reference: RH-184
Manufacturer: Ruckhouse
***This Lowering Kit was NOT designed to use the stock bars. You will either need to install at least a 1.75″ riser and use bars with a lower rise than stock, or use our “RaceBars” handlebar setup which was designed specifically around this lowering kit!*** Its FINALLY Here! After a lot of testing of various components, the 2″ Front Fork Lowering Kit for...
Reference: RH-185
Manufacturer: Ruckhouse
***This Lowering Kit was NOT designed to use the stock bars. You will either need to install at least a 1.75″ riser and use bars with a lower rise than stock, or use our “RaceBars” handlebar setup which was designed specifically around this lowering kit!*** Its FINALLY Here! After a lot of testing of various components, the 2″ Front Fork Lowering Kit for...
Reference: TRS-SEBS-AL
Manufacturer: TRS
Looking for a way to extend your TRS Slip-in Stretch Kit even further?? Want a nice upgraded option to the bolt that is included in the kit? Check out the TRS Billet Stoppers! These Billet Machined Aluminum Stoppers have an indent on the back so that once installed, it’s possible to run with the bolt in the forward position or rear position without...
Reference: RH-176
Manufacturer: Ruckhouse
Complete Bolt-in stretch Kit for Honda Grom / MSX125 with chain and chain breaker tool. All of the brackets for this kit are Billet Aluminum to match the quality and awesomeness of the rest of the kit… even the little Spanner wrench that is included for adjustments! Made right here in the USA. Stop paying high prices for the same product when you can get...
Reference: RH-177
Manufacturer: Ruckhouse
Looking to lower the rear of your Honda GROM a bit to go with the lower front end? Want to lower it without NEEDING* to install a stretch? Here you go! Kit requires no drilling, and can be installed easily with the bike properly supported (because you have to remove the rear shock). You do not need to remove the chain/wheel/etc to install! The Ruckhouse...
Reference: RH-178
Manufacturer: Ruckhouse
Looking to lower the rear of your Honda GROM a bit to go with the lower front end? Want to lower it without NEEDING* to install a stretch? Here you go! Kit requires no drilling, and can be installed easily with the bike properly supported (because you have to remove the rear shock). You do not need to remove the chain/wheel/etc to install! The Ruckhouse...
Reference: RH-179
Manufacturer: Ruckhouse
Looking to lower the rear of your Honda GROM a bit to go with the lower front end? Want to lower it without NEEDING* to install a stretch? Here you go! Kit requires no drilling, and can be installed easily with the bike properly supported (because you have to remove the rear shock). You do not need to remove the chain/wheel/etc to install! The Ruckhouse...
Reference: RH-180
Manufacturer: Ruckhouse
Looking to lower the rear of your Honda GROM a bit to go with the lower front end? Want to lower it without NEEDING* to install a stretch? Here you go! Kit requires no drilling, and can be installed easily with the bike properly supported (because you have to remove the rear shock). You do not need to remove the chain/wheel/etc to install! The Ruckhouse...
Reference: RH-183
Manufacturer: Ruckhouse
Lost your tool like many others. We now offer the Billet Aluminum Slip-in Stretch Adjuster/Spanner available separately, Functions as spanner, axle nut wrench, and built-in-bottle-opener!!! This tool is small, fits in the palm of your hand easily.
Reference: TRS-SEBS-BK
Brand: TRS
Looking for a way to extend your TRS Slip-in Stretch Kit even further?? Want a nice upgraded option to the bolt that is included in the kit? Check out the TRS Billet Stoppers! These Billet Machined Aluminum Stoppers have an indent on the back so that once installed, it’s possible to run with the bolt in the forward position or rear position without...