Custom Wheels

New products

  • Goggle Thor Combat
    Goggle Thor Combat
    Review(s): 0

    Drilled frame ports for increased ventilation and fog resistance •...

    CAD$ 37.99
  • Goggle Thor Conquer
    Goggle Thor Conquer
    Review(s): 0

    Innovative frame with maximum airflow vents • Drilled frame ports for...

    CAD$ 49.99
  • Gloves Thor Sector
    Gloves Thor Sector
    Review(s): 0

    Fitted stretch backhand panel for lightweight comfort • Notched wrist...

    CAD$ 27.99
  • Gloves Thor Spectrum
    Gloves Thor Spectrum
    Review(s): 0

    Refined chassis for increased comfort and performance • TPR...

    CAD$ 31.99
  • Gloves Thor Draft
    Gloves Thor Draft
    Review(s): 0

    Four-way stretch mesh and expansion panels allow full range of motion in...

    CAD$ 31.99
  • Gloves Mechanix The Original
    Gloves Mechanix The Original
    Review(s): 0

    Fingertip pattern reduces seams and enhances fingertip sensitivity •...

    CAD$ 28.99
  • Gloves Mechanix The Original High Dexterity 0.5mm
    Gloves Mechanix The Original High Dexterity 0.5mm
    Review(s): 0

    Allows tactile control of bare hands while wearing gloves • Mechanix...

    CAD$ 29.99
  • Gloves Mechanix The Original Grip
    Gloves Mechanix The Original Grip
    Review(s): 0

    Work smarter, not harder with The Original® Grip gloves • Palms covered...

    CAD$ 32.99
  • Gloves Bitwell Bantam
    Gloves Bitwell Bantam
    Review(s): 0

    Heavy-duty leather construction in the palm, fingers and thumbs •...

    CAD$ 62.99
  • Gloves Bitwell Moto
    Gloves Bitwell Moto
    Review(s): 0

    Two-way stretch polyester back panel construction for ventilation and...

    CAD$ 49.99
  • Gloves Alpinestar Shore
    Gloves Alpinestar Shore
    Review(s): 0

    Lightweight summer glove with multi-material main shell construction •...

    CAD$ 54.99
  • Gloves Alpinestar Atom
    Gloves Alpinestar Atom
    Review(s): 0

    Premium leather glove main body • Soft-shell windbreaker material and...

    CAD$ 79.99
Styling Parts // Accessories
per page
Showing 1 - 36 of 56 items
  • CAD$ 67.99 CAD$ 84.99 -20% Special order

    Reference: CMO_7_1100_2_Raw

    Brand: Composimo

    Review(s): 0

    Looking to lower the rear of your Honda GROM a bit to go with the lower front end? Want to lower it without NEEDING* to install a stretch? Here you go! Kit requires no drilling, and can be installed easily with the bike properly supported (because you have to remove the rear shock). You do not need to remove the chain/wheel/etc to install! The ComposiMo...

    CAD$ 67.99 CAD$ 84.99 -20%
    Reduced price!
    In Stock
  • CAD$ 83.19 CAD$ 103.99 -20% Special order

    Reference: CMO_7_1100_2_Black

    Brand: Composimo

    Review(s): 0

    Looking to lower the rear of your Honda GROM a bit to go with the lower front end? Want to lower it without NEEDING* to install a stretch? Here you go! Kit requires no drilling, and can be installed easily with the bike properly supported (because you have to remove the rear shock). You do not need to remove the chain/wheel/etc to install! The ComposiMo...

    CAD$ 83.19 CAD$ 103.99 -20%
    Reduced price!
    In Stock
  • CAD$ 75.19 CAD$ 93.99 -20% Out of stock

    Reference: CMO_7_1100_4_Raw

    Brand: Composimo

    Review(s): 0

    Looking to lower the rear of your Honda GROM after you've added a stretch to the stock swingarm? Kit requires no drilling, and can be installed with the bike on the ground with the bike properly supported (because you have to remove the rear shock). This kit DOES require the use of a slip-in stretch on the stock swingarm... this will not fit aftermarket...

    CAD$ 75.19 CAD$ 93.99 -20%
    Add to cart More
    Reduced price!
    Out of stock
  • CAD$ 90.39 CAD$ 112.99 -20% Out of stock

    Reference: CMO_7_1100_4_Black

    Brand: Composimo

    Review(s): 0

    Looking to lower the rear of your Honda GROM after you've added a stretch to the stock swingarm? Kit requires no drilling, and can be installed with the bike on the ground with the bike properly supported (because you have to remove the rear shock). This kit DOES require the use of a slip-in stretch on the stock swingarm... this will not fit aftermarket...

    CAD$ 90.39 CAD$ 112.99 -20%
    Add to cart More
    Reduced price!
    Out of stock
  • CAD$ 75.19 CAD$ 93.99 -20% Special order

    Reference: CMO_7_1100_6_Raw

    Brand: Composimo

    Review(s): 0

    Looking to lower the rear of your Honda GROM after you've added a stretch to the stock swingarm? This is the rear shock link you need for SUPERIOR lowness!!! Kit requires no drilling, and can be installed with the bike on the ground, properly supported (because you have to remove the rear shock). This kit DOES require the use of a slip-in stretch on the...

    CAD$ 75.19 CAD$ 93.99 -20%
    Reduced price!
    In Stock
  • CAD$ 90.39 CAD$ 112.99 -20% Special order

    Reference: CMO_7_1100_6_Black

    Brand: Composimo

    Review(s): 0

    Looking to lower the rear of your Honda GROM after you've added a stretch to the stock swingarm? This is the rear shock link you need for SUPERIOR lowness!!! Kit requires no drilling, and can be installed with the bike on the ground, properly supported (because you have to remove the rear shock). This kit DOES require the use of a slip-in stretch on the...

    CAD$ 90.39 CAD$ 112.99 -20%
    Reduced price!
    In Stock
  • CAD$ 115.99 CAD$ 144.99 -20% Special order

    Reference: CMO_7_1500_Raw

    Brand: Composimo

    Review(s): 0

    Front Scooter Fork Adapters for the Honda Grom! These adapters are what you need if you want to bring a whole new look and aggressive feel to your Honda GROM! The Scooter Fork Adapters allow you to install an front fork RRGS/NCY Ruckus-style Fork Assembly on your Grom. ***Warning: This setup WILL require a decent bit of modification, and because of the...

    CAD$ 115.99 CAD$ 144.99 -20%
    Reduced price!
    In Stock
  • CAD$ 135.19 CAD$ 168.99 -20% Special order

    Reference: CMO_7_1500_Black

    Brand: Composimo

    Review(s): 0

    Front Scooter Fork Adapters for the Honda Grom! These adapters are what you need if you want to bring a whole new look and aggressive feel to your Honda GROM! The Scooter Fork Adapters allow you to install an front fork RRGS/NCY Ruckus-style Fork Assembly on your Grom. ***Warning: This setup WILL require a decent bit of modification, and because of the...

    CAD$ 135.19 CAD$ 168.99 -20%
    Reduced price!
    In Stock
  • CAD$ 159.99 CAD$ 199.99 -20% Out of stock

    Reference: CMO_7_1200_Raw

    Brand: Composimo

    Review(s): 0

    ***This Lowering Kit was NOT designed to use the stock bars. You will either need to install at least a 1.75" riser and use bars with a lower rise than stock, or use our "RaceBarZ" handlebar setup (CLICK HERE FOR BARZ), which was designed specifically around this lowering kit!***. Its FINALLY Here! After a lot of testing of various components, the 2"...

    CAD$ 159.99 CAD$ 199.99 -20%
    Add to cart More
    Reduced price!
    Out of stock
  • CAD$ 179.99 CAD$ 224.99 -20% Out of stock

    Reference: CMO_7_1200_Black

    Brand: Composimo

    Review(s): 0

    ***This Lowering Kit was NOT designed to use the stock bars. You will either need to install at least a 1.75" riser and use bars with a lower rise than stock, or use our "RaceBarZ" handlebar setup (CLICK HERE FOR BARZ), which was designed specifically around this lowering kit!***. Its FINALLY Here! After a lot of testing of various components, the 2"...

    CAD$ 179.99 CAD$ 224.99 -20%
    Add to cart More
    Reduced price!
    Out of stock
  • CAD$ 259.99 CAD$ 324.99 -20% Special order

    Reference: CMO_7_1000_Raw

    Brand: Composimo

    Review(s): 0

    Looking for a simple, easy to do stretch for your Honda Grom? This is IT! Awesome looks with the eccentric chain-tension feature, and Billet Aluminum construction for superior strength! All of the brackets for this kit are now Billet Aluminum to match the quality and awesomeness of the rest of the kit... even the little Spanner wrench that is included for...

    CAD$ 259.99 CAD$ 324.99 -20%
    Reduced price!
    In Stock
  • CAD$ 303.99 CAD$ 379.99 -20% Out of stock

    Reference: CMO_7_1000_GlossBlack

    Brand: Composimo

    Review(s): 0

    Looking for a simple, easy to do stretch for your Honda Grom? This is IT! Awesome looks with the eccentric chain-tension feature, and Billet Aluminum construction for superior strength! All of the brackets for this kit are now Billet Aluminum to match the quality and awesomeness of the rest of the kit... even the little Spanner wrench that is included for...

    CAD$ 303.99 CAD$ 379.99 -20%
    Add to cart More
    Reduced price!
    Out of stock
  • CAD$ 124.79 CAD$ 155.99 -20% Special order

    Reference: CMO_7_1400

    Brand: Composimo

    Review(s): 0

    The ULTIMATE lighting statement for your Honda GROM! Totally overkill in EVERY way possible, but absolutely BADASS!... This lighting setup WILL turn night into DAY! (Not legal for highway use). Set it up so that one LED is your Low Beam, and all three are your High Beam, or any combination you want! You could even have the third be a separate switch if...

    CAD$ 124.79 CAD$ 155.99 -20%
    Reduced price!
    In Stock
  • CAD$ 239.99 CAD$ 299.99 -20% Special order

    Reference: CMO_7_2500_Aluminium

    Brand: Composimo

    Review(s): 0

    Looking for a STRONG new Rear Set for your Honda GROM? Here it is!!! As seen on the "Project #HandBuiltGROM" This is an absolutely NO-Compromise part, machined from one SOLID chunk of 6061 Billet Aluminum! Includes Stainless Steel mounting hardware! These Rear Sets are designed to mount everything in the factory locations, and provide unmatched strength,...

    CAD$ 239.99 CAD$ 299.99 -20%
    Reduced price!
    In Stock
  • CAD$ 269.59 CAD$ 336.99 -20% Special order

    Reference: CMO_7_2500_Black

    Brand: Composimo

    Review(s): 0

    Looking for a STRONG new Rear Set for your Honda GROM? Here it is!!! As seen on the "Project #HandBuiltGROM" This is an absolutely NO-Compromise part, machined from one SOLID chunk of 6061 Billet Aluminum! Includes Stainless Steel mounting hardware! These Rear Sets are designed to mount everything in the factory locations, and provide unmatched strength,...

    CAD$ 269.59 CAD$ 336.99 -20%
    Reduced price!
    In Stock
  • CAD$ 65.59 CAD$ 81.99 -20% Special order

    Reference: CMO_7_2550

    Brand: Composimo

    Review(s): 0

    Looking for a way to run some of the newer 2017 Honda Grom Exhausts with your ComposiMo 'RaceSets' Rear Sets? Here is your solution! 3D Machined from 6061 Aluminum, this gives your 2017 Exhaust the mounting point it needs! Comes with Stainless Bolt for mounting Exhaust to the bracket... uses the existing hardware the RaceSets come with for mounting to the...

    CAD$ 65.59 CAD$ 81.99 -20%
    Reduced price!
    In Stock
  • CAD$ 35.19 CAD$ 43.99 -20% Out of stock

    Reference: CMO_7_1055

    Brand: Composimo

    Review(s): 0

    Want a slick set of Spools for your swingarm? These Spools by ComposiMo are designed to work with the Billet Stoppers on the Skip-In Stretch Kits! You must have the ComposiMo Billet Stoppers installed to use these Spools!

    CAD$ 35.19 CAD$ 43.99 -20%
    Add to cart More
    Reduced price!
    Out of stock
  • CAD$ 21.99 Product available with different options

    Reference: STR-052.74/BK

    Brand: Str8

    Review(s): 0

    New reinforced quality. If you think that TNT grids have so far been way too flimsy, you will be thrilled: 2 new anodised aluminium grids in different sizes and hole patterns. Just the right thing to attach behind body apertures such as radiator vents. Can easily be handled, available in 12 great colours.

    CAD$ 21.99
    Product available with different options
  • CAD$ 13.99 Out of stock

    Reference: STR-245.70/

    Brand: Str8

    Review(s): 0

    Mirror mount now available from STR8 for downhill handlebars. Allows for mounting all mirrors with M8 thread size to your downhill handlebar or any other handlebar without brackets.

    CAD$ 13.99
    Out of stock
  • CAD$ 7.99 Out of stock

    Reference: S6-SSP630ET002

    Brand: Stage6

    Review(s): 0

    We offer here adaptator for use M8 Stage6 mirror on scooter with M10 mirror thread.

    CAD$ 7.99
    Add to cart More
    Out of stock
  • CAD$ 7.99 Out of stock

    Reference: S6-SSP630ET003

    Brand: Stage6

    Review(s): 0

    We offer here adaptator for use M8 Stage6 mirror on scooter with M10 mirror thread.

    CAD$ 7.99
    Add to cart More
    Out of stock
  • CAD$ 15.99 Out of stock

    Reference: 473051

    Brand: Tun'R

    Review(s): 0

    Tun'r Mirror mount now available. Allows for mounting all mirrors with M8 thread size to your downhill handlebar or any other handlebar without brackets.

    CAD$ 15.99
    Out of stock
  • CAD$ 11.99 Out of stock

    Reference: RETRO09900

    Brand: Bcd

    Review(s): 0

    Adaptor for Mirror BCD F1 that allow to use it on scooter with M10 mirror. Include special and standard thread for the right mirror.

    CAD$ 11.99
    Add to cart More
    Out of stock
  • CAD$ 3.99 Product available with different options

    Reference: 33240

    Brand: Tun'R

    Review(s): 0

    Tun'r Mirror adaptor M8 to M10, M10 to M8 with standard or reverse thread.

    CAD$ 3.99
    Product available with different options
  • CAD$ 124.99 Out of stock

    Reference: TBR374-08-01

    Brand: Two Brothers Racing

    Review(s): 0

    Two Brothers Racing offer here Black billet foot peg for Honda Grom.

    CAD$ 124.99
    Add to cart More
    Out of stock
  • CAD$ 50.39 CAD$ 55.99 -10% 4 – 10 days

    Reference: TRS-CSC088

    Brand: TRS

    Review(s): 0

    Looking to cover up that UGLY starter with a really stylish option? Check out the TRS Billet Aluminum Starter Cover! Machined from a solid chunk of 6061 Billet Aluminum... Comes with all Stainless Steel hardware, and features a separate bolt hole on the back of the cover for the Starter Ground Wire to keep it all hidden! Top is polished. See Before and...

    CAD$ 50.39 CAD$ 55.99 -10%
    Reduced price!
    In Stock
  • CAD$ 22.49 CAD$ 24.99 -10% 4 – 10 days

    Reference: TRS-TLI003

    Brand: TRS

    Review(s): 0

    This is the TRS honda Grom / MSX-125 flush mount tail light with integrated turn signals. Great way to clean up the rear of your honda grom! When switching to led make sure you upgrade your flasher relay to the orange led flasher so the signals do not stay lit when blinker is on. This looks great when you eliminate the oem tag bracket and want the sleeker...

    CAD$ 22.49 CAD$ 24.99 -10%
    Reduced price!
    In Stock
  • CAD$ 129.59 CAD$ 143.99 -10% 4 – 10 days

    Reference: TRS-RHB012/AL

    Brand: TRS

    Review(s): 0

    TRS RUCKEYES works on bolt 2014-2015 models and 2018+ models. Finished off with Billet washers and Stainless steel hardware. Comes in Raw or Anodized black. Allows you to add our LED Turn signals and Bezels. (See Related Items NOT INCLUDED) Comes with USA made Headlight Harness no need to buy OEM one. All connections and terminals supplied. Simple...

    CAD$ 129.59 CAD$ 143.99 -10%
    Reduced price!
    In Stock
  • CAD$ 145.79 CAD$ 161.99 -10% 4 – 10 days

    Reference: TRS-RHB012/BK

    Brand: TRS

    Review(s): 0

    TRS RUCKEYES works on bolt 2014-2015 models and 2018+ models. Finished off with Billet washers and Stainless steel hardware. Comes in Raw or Anodized black. Allows you to add our LED Turn signals and Bezels. (See Related Items NOT INCLUDED) Comes with USA made Headlight Harness no need to buy OEM one. All connections and terminals supplied. Simple...

    CAD$ 145.79 CAD$ 161.99 -10%
    Reduced price!
    In Stock
  • CAD$ 38.69 CAD$ 42.99 -10% 4 – 10 days

    Reference: TRS-SEBS-AL

    Brand: TRS

    Review(s): 0

    Looking for a way to extend your TRS Slip-in Stretch Kit even further?? Want a nice upgraded option to the bolt that is included in the kit? Check out the TRS Billet Stoppers! These Billet Machined Aluminum Stoppers have an indent on the back so that once installed, it’s possible to run with the bolt in the forward position or rear position without...

    CAD$ 38.69 CAD$ 42.99 -10%
    Reduced price!
    In Stock
  • CAD$ 146.69 CAD$ 162.99 -10% 4 – 10 days

    Reference: TRS-SAK001/BK

    Brand: TRS

    Review(s): 0

    Lowered your GROM? Looking for more ground clearance ? Then you NEED this CNC Machined Stainless Steel and Aluminum Kickstand mount! The SwingStand backing plate is machined from 6061 Aircraft Grade Aluminum and Hard Anodized Black, and the outer plate (where the kick stand mounts) Stainless Steel and then powered Gloss black to match the stock swing arm....

    CAD$ 146.69 CAD$ 162.99 -10%
    Reduced price!
    In Stock
  • CAD$ 184.49 CAD$ 204.99 -10% 4 – 10 days

    Reference: TRS-KICK001/BK

    Brand: TRS

    Review(s): 0

    TRS CNC Kickstand with the Kickstand mount for Honda Grom.

    CAD$ 184.49 CAD$ 204.99 -10%
    Reduced price!
    In Stock
  • CAD$ 59.39 CAD$ 65.99 -10% 4 – 10 days

    Reference: TRS-CC40/AL

    Brand: TRS

    Review(s): 0

    Why does Honda have the Fins going vertical on their cam cover? We fixed the problem with the TRS GROM CAM COVER. Our fins are large for maximum engine cooling and are Horizonal allowing the air to travel across the fins. Comes with Stainless Hardware and ultilizes you stock gasket. Made in USA from 6061 billet. Available in Raw, Hard Anodized Black, or...

    CAD$ 59.39 CAD$ 65.99 -10%
    Reduced price!
    In Stock
  • CAD$ 62.09 CAD$ 68.99 -10% 4 – 10 days

    Reference: TRS-CC40/BK

    Brand: TRS

    Review(s): 0

    Why does Honda have the Fins going vertical on their cam cover? We fixed the problem with the TRS GROM CAM COVER. Our fins are large for maximum engine cooling and are Horizonal allowing the air to travel across the fins. Comes with Stainless Hardware and ultilizes you stock gasket. Made in USA from 6061 billet. Available in Raw, Hard Anodized Black, or...

    CAD$ 62.09 CAD$ 68.99 -10%
    Reduced price!
    In Stock
  • CAD$ 62.09 CAD$ 68.99 -10% 4 – 10 days

    Reference: TRS-CC40/CC

    Brand: TRS

    Review(s): 0

    Why does Honda have the Fins going vertical on their cam cover? We fixed the problem with the TRS GROM CAM COVER. Our fins are large for maximum engine cooling and are Horizonal allowing the air to travel across the fins. Comes with Stainless Hardware and ultilizes you stock gasket. Made in USA from 6061 billet. Available in Raw, Hard Anodized Black, or...

    CAD$ 62.09 CAD$ 68.99 -10%
    Reduced price!
    In Stock
  • CAD$ 54.89 CAD$ 60.99 -10% 4 – 10 days

    Reference: TRS-TC24/AL

    Brand: TRS

    Review(s): 0

    Looking for something out of the ordinary to set your grom apart but have something that functions too? TRS has it. The honda msx125 grom cnc billet tappet covers. Finned for extra cooling to your motor. we even put the grooves in the back with the bumps to hold the oem gasket . This extra detail is what sets it apart from the others on the market....

    CAD$ 54.89 CAD$ 60.99 -10%
    Reduced price!
    In Stock
Showing 1 - 36 of 56 items