No products
High-quality replacement gudgeon pin circlips from Malossi for 10mm and...
The HAT weights are very durable and self lubricating. Available in a...
Pro Taper is well known for manufacturing high-quality grips and...
Budget weights by Motoforce, choice of weights. Available in a range of...
Replacement reed valve gasket for all Minarelli Horizontal engines.
The thermal grade of the spark-plug is of prime importance with tuning...
We can offer high-quality exhaust gaskets for all common original, sport...
The Polini FOR RACE crankshafts are developed to increase the...
The Polini FOR RACE crankshafts are developed to increase the...
Also known as Maintenance Free, this...
Reference: S6-4080/WH
Brand: Stage6
Multifunctional, universal digital Stage6 speedometer with illuminated display, available with white or orange casing. The speedo has a size of 100 x 60 x 20mm and requires a 12V supply and a battery. Revs are picked up inductively while the speed is picked up via a magnet sensor installed at the wheel. As an alternative, a speedo adapter for Yamaha/MBK...
Reference: EKP-023
Brand: Motoforce
Spring clips to provide a tight seat of the fuel hose on fuel tap and carburettor connection.
Reference: MF96.90017
Brand: Motoforce
Set of spring clips from Motoforce. Diameter of 8.5mm, therefore universally suitable for different hose connections. Kit include 10 clip with diameter of 8,5mm
Reference: MF99.00067
Brand: Motoforce
Inserting exhaust springs takes quite a lot of strength. In order to prevent slipping of with the pliers, we recommend using this spring stretcher, which makes things a lot easier.
Reference: S6-0221
Brand: Stage6
The fully synthetic oil with modern high-performance additives was developed for extreme conditions such as racing and accordingly offers high lubrication properties to reduce friction and consequently improve output and performance. It is a high performance lubricant with shear stable, antioxidant, anti-corrosion and anti-wear and anti-foaming...
Reference: S6-56166ET022
Brand: Stage6
This little castle washer sits at the end of the crankshaft and connects to the kickstart pinion gear. it is an essential part of the transmission, so in case it is damaged or missing, please replace immediately.
Reference: S6-2019502P
Brand: Stage6
Taller gears in the transmission reduce the overall reduction factor of the gearbox. If the engine is powerful enough to pull the taller gears, this modification will also raise top speed. The original gears in some models are quite short; this is where you can gain some km/h more even with original cylinders. Different from common gear units, the ones...
Reference: S6-2019501P
Brand: Stage6
Taller gears in the transmission reduce the overall reduction factor of the gearbox. If the engine is powerful enough to pull the taller gears, this modification will also raise top speed. The original gears in some models are quite short; this is where you can gain some km/h more even with original cylinders. Different from common gear units, the ones...
Reference: S6-140065
Brand: Stage6
We now offer an update on the caliper adapter for the 4-piston caliper from Stage6 R/T for Yamaha Aerox and Gilera Runner. The actual bracket remains the same, the length of the spacer sleeves has been slightly changed to be able to install more common brake disc sizes. The adapter can be used on various models and is designed for the original fork...
Reference: MF96.20005
Brand: Scootertuning.ca
When exchanging the fork or noticing too much play in the steering assembly, you should replace the steering bearings. This set includes all top and bottom bearings necessary. You should grease the bearings before assembling them
Reference: 10603
Brand: Rms
Complete RMS steering head bearing set contains all the necessary parts for servicing the steering head. Cheaper than the original, without a loss of quality.
Reference: S6-0503
Brand: Stage6
New Stage6 maxi sticker sheets in Din A2 and A4. Now with Stage6 R/T logo. You can choose between two versions: white for dark surfaces or black for light surfaces; for the smaller set, there is only one colour version.
Reference: S6-0504
Brand: Stage6
Reference: L-SASTAGE6/BK
Brand: Stage6
This is the most famous Stage6, the one you definitely can’t do without! Available in black or white writing.
Reference: S6-0530/S
Brand: Stage6
Rare Stage6 R/T Breed of Speed sticker that was previously only available on trade fairs and other events. Transparent foil with white or black print.
Reference: S6-0530/W
Brand: Stage6
Rare Stage6 R/T Breed of Speed sticker that was previously only available on trade fairs and other events. Transparent foil with white or black print.
Reference: S6-0535/HL
Brand: Stage6
For Stage6 fans: Sticker with great-looking hologram effect. Pimp your ride (or cell phone case or whatever comes your way) with cool stickers from your favorite brand.
Reference: S6-0537/HL
Brand: Stage6
For Stage6 fans: Sticker with great-looking hologram effect. Pimp your ride (or cell phone case or whatever comes your way) with cool stickers from your favorite brand.
Reference: L-SASTAGE6/WH
Brand: Stage6
This is the most famous Stage6, the one you definitely can’t do without! Available in black or white writing.
Reference: S6-9916605
Brand: Stage6
The Stage6 subframe offers you the opportunity to fit your MBK Nitro/ Yamaha Aerox with a carburettor directly above the rear wheel where conventional subframe bars get in the way. Equipped with rubber supports, the subframe can be mounted flexibly - for everyday use - or suspension movement can be suppressed - for races. The advantages are plain to see:...
Reference: S6-SSP119/
Brand: Stage6
Switch unit from Stage6 that will dwarf all plastic handlebar controls available so far on the market. This switch unit is an excellently finished state-of-the-art product CNC milled from aluminium. And the equipment leaves nothing to be desired either. The unit offers opportunities to connect indicators, light switch as well as horn or starter and is...
Reference: EKP-011
Brand: Motoforce
In order to connect a boost bottle, you need a Y- or T-connector, if it is not already included in the package. It can also of course be used to split a fuel hose into two directions.
Reference: MF99.00107
Brand: Motoforce
We can also offer T-handle socket wrenches in different sizes from Motoforce. These parts are essential for every workshop. Thanks to the large handle, even stubborn bolts can easily be loosened.
Reference: SHIRTS6/
Brand: Stage6
Regular fit – shirts are a bit too small. Please order 1 size larger. We’ve had these stylish shirts with Stage6, Stage6 R/T and Scootertuning is not a Crime (STINAC) logos made just for you. These are high-quality shirts with premium screen prints on the front. Regular fit – shirts are a bit too small. Please order 1 size larger.
Reference: SHIRTS6RT/
Brand: Stage6
Regular fit – shirts are a bit too small. Please order 1 size larger. We’ve had these stylish shirts with Stage6, Stage6 R/T and Scootertuning is not a Crime (STINAC) logos made just for you. These are high-quality shirts with premium screen prints on the front. Regular fit – shirts are a bit too small. Please order 1 size larger.
Reference: S6-4031
Brand: Stage6
Stage6 is rolling out a revised and improved version of their popular mini tachometer / rev counter. The MKII is the ultimate must-have for setting up engine and variator. This compact and easy-to-read digital tachometer with blue illuminated display gives extremely precise engine speed info within a tolerance range of only 10rpm and will be the perfect...
Reference: STR-620.11/BK
Brand: Str8
STR8 Indicator Lens Set (4) with tail light transparent black. We recommend using coloured bulbs with these lenses, red bulbs for the brake light and orange bulbs for the indicators.
Reference: STR-620.12/BK
Brand: Str8
STR8 Indicator Lens Set (4) with tail light transparent black. We recommend using coloured bulbs with these lenses, red bulbs for the brake light and orange bulbs for the indicators. Transparent black.
Reference: STR-656.00
Brand: Str8
Tail Light Adapter STR8 Easy Connect, w. indicator function, universal, ideal solution for connecting the wires of your tail light. The connecting cables come in different, easily distinguishable colours. Universal fit, including plastic sleeves and blade receptables.
Reference: STR-656.05/CE
Brand: Str8
STR8 LED Tail Light with indicator function "Black Line" Aprilia SR Factory, tail light + integrated signal light function. Always keeping up with the latest trends in customizing, this STR8 LED Tail Light Black Line features a black background, not a chrome-plated one like standard Lexus lights. It comes with powerful LEDs, and gives your scooter a very...
Reference: STR-655.21/BK
Brand: Str8
Universal rear light with indicator operation from the Black Line series with tinted glass. Homologated for road use, this offers the chance to legally go for the popular LED option, e.g. when you've changed the fairing or when the original light can no longer be used. Size: 15x 8.5 cm.Please note that the homologation only applies to the rear light, not...
Reference: STR-648.08
Brand: Str8
Tail light with integrated indicators for Booster between 1999 and 2003, with original "Fang" indicators. Transparent white
Reference: STR-655.21/CE
Brand: Str8
This universal rear light is homologated and offers the chance to fit a popular LED version including indicators in case of fairing work or if you don't want to keep the original lamp. Dimensions: 15 x 8.5 cm.
Reference: STR-658.15
Brand: Str8
Hot stuff: clear lens tail light with beautiful reflector. Comes with bulb and everything, just wire up and go.
Reference: STR-648.09
Brand: Str8
STR8 Tail Light w/ indicators featuring the standard required colours for brake and indicator lights. The indicators are now big enough to meet legal requirements, so this is an ideal replacement for older scooter models.
Reference: MF99.00112
Brand: Motoforce
Indispensable for all performance ignition systems, since they require timing to be set by hand (Italkit, Malossi, Polini and MVT inner rotor ignitions). Comes complete with a certificate to prove accuracy, mounting kit and feeler tip.