No products
High-quality replacement gudgeon pin circlips from Malossi for 10mm and...
The HAT weights are very durable and self lubricating. Available in a...
Pro Taper is well known for manufacturing high-quality grips and...
Budget weights by Motoforce, choice of weights. Available in a range of...
Replacement reed valve gasket for all Minarelli Horizontal engines.
The thermal grade of the spark-plug is of prime importance with tuning...
We can offer high-quality exhaust gaskets for all common original, sport...
The Polini FOR RACE crankshafts are developed to increase the...
The Polini FOR RACE crankshafts are developed to increase the...
Reference: STR-696.11/BT
Manufacturer: Str8
STR8 LED indicators in a very stylish look. With their aerodynamic lines, they are a perfect match for many modern scooter models. As always, they come equipped with reliable LED technology and E-mark. Can be universally used and offers a choice of two body colours.Length: 90mm (thread 20mm)
Reference: STR-696.11/WH
Manufacturer: Str8
STR8 LED indicators in a very stylish look. With their aerodynamic lines, they are a perfect match for many modern scooter models. As always, they come equipped with reliable LED technology and E-mark. Can be universally used and offers a choice of two body colours. Length: 90mm (thread 20mm)
Reference: STR-687.12/BT
Manufacturer: Str8
The STR8 LED Mini II indicators are the new, even smaller version of the LED Mini indicators. Despite their small size, the 6 LEDs provide as bright light as their predecessors. The indicators come with an E-mark so they can be legally used on the street.Attention: On some scooters, LED indicators don't work correctly; in that case you will have to...
Reference: STR-687.12/WH
Manufacturer: Str8
The STR8 LED Mini II indicators are the new, even smaller version of the LED Mini indicators. Despite their small size, the 6 LEDs provide as bright light as their predecessors. The indicators come with an E-mark so they can be legally used on the street.Attention: On some scooters, LED indicators don't work correctly; in that case you will have to...
Reference: STR-687.12/BK
Manufacturer: Str8
The STR8 LED Mini II indicators are the new, even smaller version of the LED Mini indicators. Despite their small size, the 6 LEDs provide as bright light as their predecessors. The indicators come with an E-mark so they can be legally used on the street.Attention: On some scooters, LED indicators don't work correctly; in that case you will have to...
Reference: STR-687.12/CR
Manufacturer: Str8
The STR8 LED Mini II indicators are the new, even smaller version of the LED Mini indicators. Despite their small size, the 6 LEDs provide as bright light as their predecessors. The indicators come with an E-mark so they can be legally used on the street.Attention: On some scooters, LED indicators don't work correctly; in that case you will have to...
Reference: 477478
Manufacturer: Tun'R
Classy looking Tun'r Indicators "Ambiance" at bargain price.
Reference: 450460
Manufacturer: Tun'R
Tun'r offer here glue-on indicators ''Raindrop''. Stylish drop-shaped signal lights that can be glued to every smooth surface.
Reference: 473398
Manufacturer: Tun'R
Tun'r offer here glue-on indicators ''Raindrop'. Stylish drop-shaped signal lights that can be glued to every smooth surface.
Reference: 283258
Manufacturer: Tun'R
Tun'r offer here glue-on indicators ''Raindrop''. Stylish drop-shaped signal lights that can be glued to every smooth surface.
Reference: 451580
Manufacturer: Tun'R
Tun'r offer here glue-on indicators ''Raindrop'. Stylish drop-shaped signal lights that can be glued to every smooth surface.
Reference: 451583
Manufacturer: Tun'R
Tun'r offer here glue-on indicators ''raindrop'. Stylish drop-shaped signal lights that can be glued to every smooth surface.
Reference: 451581
Manufacturer: Tun'R
Tun'r offer here glue-on indicators ''Raindrop'. Stylish drop-shaped signal lights that can be glued to every smooth surface.
Reference: 487544
Manufacturer: Tun'R
Tun'r indicator light with orange leds and transparent lenses to add a clean and modern touch to your ride. Quick and easy to install.
Reference: 477477
Manufacturer: Tun'R
Tun'r indicator light with orange bulb and transparent lenses to add a clean and modern touch to your ride. Quick and easy to install.
Reference: VC20103
Manufacturer: Scootertuning.ca
Mini indicator set universal with short stalk for motorcycles, scooters or ATVs M8 thread (fitment requires 8mm hole to be drilled). Replacement for OEM indicator of Beta RR. Set of 2 indicators, length of 68mm (short) - measured from bodywork.
Reference: IP24492
Manufacturer: Scootertuning.ca
These stylish LEDs are the perfect accessory for upgrading any scooter, motorcycle and ATV, with 10mm thread (mounting also required a 10mm hole) Set contains two individual indicators. To ensure proper LED function, we recommend an LED indicator relays. 68mm in length (measured from fairing).
Reference: IP24493
Manufacturer: Scootertuning.ca
These stylish LEDs are the perfect accessory for upgrading any scooter, motorcycle and ATV, with 10mm thread (mounting also required a 10mm hole) Set contains two individual indicators. To ensure proper LED function, we recommend an LED indicator relays. 100mm in length (measured from fairing).
Reference: STR-682.66
Manufacturer: Str8
"Raindrop" signal lights by STR8 - stylish drop-shaped signal lights that can be glued to every smooth surface. Carbon look / orange lens.
Reference: STR-682.67
Manufacturer: Str8
"Raindrop" signal lights by STR8 - stylish drop-shaped signal lights that can be glued to every smooth surface. Chrome / orange lens.
Reference: P36619
Manufacturer: Replay
Reference: P11347
Manufacturer: Replay
Reference: P11349
Manufacturer: Replay
Reference: CMO_7_1400
Manufacturer: Composimo
The ULTIMATE lighting statement for your Honda GROM! Totally overkill in EVERY way possible, but absolutely BADASS!... This lighting setup WILL turn night into DAY! (Not legal for highway use). Set it up so that one LED is your Low Beam, and all three are your High Beam, or any combination you want! You could even have the third be a separate switch if...
Reference: TRS-RHB012/BK
Manufacturer: TRS
TRS RUCKEYES works on bolt 2014-2015 models and 2018+ models. Finished off with Billet washers and Stainless steel hardware. Comes in Raw or Anodized black. Allows you to add our LED Turn signals and Bezels. (See Related Items NOT INCLUDED) Comes with USA made Headlight Harness no need to buy OEM one. All connections and terminals supplied. Simple...
Reference: CH-GJ-1020
Manufacturer: Chimera
Gojin AC to DC Rectifier for Honda Grom 125! 100% plug and play! No need to de-pin any wires or anything fancy! Simply remove the stock rectifier and swap this one in!
Reference: FLP-007
Manufacturer: FLP
Insired by Mike Wazowski from Monsters Inc. These brackets allow you to replace your stock Grom headlight with a single round 7″ light. The brackets come anodized black or raw, and are built in with flush mounted turn signals. Includes: Brackets BLACK or RAW / Turn Signals amber eagle eye / Spacers / Hardware / Round 7″ LED LIGHT. You will need to buy a...
Reference: TRS-TLI003
Manufacturer: TRS
This is the TRS honda Grom / MSX-125 flush mount tail light with integrated turn signals. Great way to clean up the rear of your honda grom! When switching to led make sure you upgrade your flasher relay to the orange led flasher so the signals do not stay lit when blinker is on. This looks great when you eliminate the oem tag bracket and want the sleeker...
Reference: STR-667.10
Manufacturer: Str8
Please note that you will need 1 resistor per side.
Reference: KO-KD006000
Manufacturer: Koso
Electronic flashlight relays don't have the typical clicking sound known from mechanical relays and are less prone to defects. The relays are ideal to solve the problem of LED indicators that flash too slow, too fast or not at all. Can also be used in combination with standard bulbs. Attention: fit only if there is a single relais for your scooter that...
Reference: STR-667.00
Manufacturer: Str8
These mechanical flashlight relays are ideal to solve the problem of LED indicators that flash too slow, too fast, or not at all. Can also be used in combination with standard bulbs. The typical clicking sound of a mechanical relay has been kept. Depending on your scooter model, you may also require the STR8 resistor (STR-667.10) for the LED indicators to...
Reference: UN05981
Manufacturer: Scootertuning.ca
Reference: UN059843
Manufacturer: Scootertuning.ca
Reference: UN50015
Manufacturer: Scootertuning.ca
Reference: IP34993
Manufacturer: Scootertuning.ca
Load resistor with 25w and 10 ohm for LED indicators. Required for any LED upgrade. The resistor evens out the missing current form the standard light and gaurantees the required flashing frequency. Note: one per side required.
Reference: IP32336
Manufacturer: Scootertuning.ca
Electronic indicator flasher relay unit with 3 pins for with incandescent and LED indicators. Fits most 2-stroke and 4-stroke scooters, mopeds and quad or ATVs. The flashing frequency automatically adjusts to LED or indicator with standard lamps. Max. 10A.0
Reference: STR-690.01
Manufacturer: Str8
License plate light with 5 LEDs. Mounting materials are included. It is street-legal.
Reference: STR-697.10/BK
Manufacturer: Str8
If you want more light, better vision and visibility and more safety, try this STR8 Halogen Headlight black. It is an additional lamp that is connected to your 12V battery.
Reference: SCT-LPS422/BK
Manufacturer: Scootertuning.ca
12V License plate screw with white led light included.
Reference: IP21119
Manufacturer: Scootertuning.ca
Very small, electronic indicator relay with 2 pins for normal indicators with bulbs or LEDs. Suitable for most 2- and 4-stroke scooters, geared mopeds and quads / ATVs. The relay operates from 1-100w and uses less power with small LED indicators.
Reference: IP32365
Manufacturer: Scootertuning.ca
12V replacement indicator relay / flasher unit. This relay is used in many vehicle brands. It features a 90 ° offset 2-pin connector. For security, please compare your component with that in the image required photo flasher, since year of manufacturer may determine whether a different relay has been used.
Reference: NK390.32
Manufacturer: Naraku
High-quality electronic indicator relay for conventional indicators with bulbs, as well as LED indicators. Suitable for most 2-stroke and 4-stroke scooters, geared mopeds, motorcycles and quad / ATVs The flashing frequency adjusts automatically for the LED or standard bulbs. Total output of the relay is up to 150W; more than enough for all types of...
Reference: TRS-LIR002
Manufacturer: TRS
Our Flasher works on Honda Grom and used on Both ATR and DAn Max GY6 Harness. This fixes no flash or hyperflash. Plugs in directly. We need to turn dial to get desired flash rate. Elimates the need for tapping wires to install load resistors. This is NOT for OEM Honda Ruckus must use Resistor or our Relay in related items below.
Reference: P28735
Manufacturer: Replay
Reference: P34926
Manufacturer: Replay
Reference: CH-GJ-1020
Manufacturer: Chimera
Gojin AC to DC Rectifier for Honda Grom 125! 100% plug and play! No need to de-pin any wires or anything fancy! Simply remove the stock rectifier and swap this one in!
Reference: SCT1105
Manufacturer: Scootertuning.ca
12V 20W halogen bulbs used in nearly all of the double and quattro optics. Amazing look and excellent luminous efficacy! Include Socket connector!
Reference: 19730
Manufacturer: Scootertuning.ca
Replacement bulb for 2-wheelers with BA15S base. 12V/5W. Please check image prior to ordering.
Reference: 19738
Manufacturer: Scootertuning.ca
Replacement front headlight bulb for two-wheeled vehicles as well as quads/ATV’s with BA20d base. 12V bulb with 25/25W. Please check your item against the image for added assurance.
Reference: 19739
Manufacturer: Scootertuning.ca
Replacement front headlight bulb for two-wheeled vehicles as well as quads/ATV’s with BA20d base. 12V bulb with 35/35W. Please check your item against the image for added assurance.
Reference: VC28517
Manufacturer: Scootertuning.ca
Replacement H1 halogen 12V 55W headlight bulb with P14, 5s base. Please compare item specifics with your current bulb for compatibility.
Reference: VC15127
Manufacturer: Scootertuning.ca
Replacement H3 12V 55W headlight bulb with PK22S base. Please compare item specifics with your current bulb for compatibility.
Reference: VC30980
Manufacturer: Scootertuning.ca
Replacement HB3 12V 60W halogen headlight bulb with P20d base. Please compare item specifics with your current bulb for compatibility.
Reference: VC24477
Manufacturer: Scootertuning.ca
Replacement H4 12V 60W headlight bulb with P43t base. Please compare item specifics with your current bulb for compatibility.
Reference: VC30981
Manufacturer: Scootertuning.ca
Replacement HB4 12V 51W headlight bulb with P22D base. Please compare item specifics with your current bulb for compatibility.
Reference: VC23727
Manufacturer: Scootertuning.ca
Replacement H7 halogen 12V 55W headlight bulb with PX26d base. Please compare item specifics with your current bulb for compatibility.
Reference: VC23268
Manufacturer: Scootertuning.ca
Replacement H8 halogen 12V 55W headlight bulb with PGJ19-1 base. Please compare item specifics with your current bulb for compatibility.
Reference: VC30978
Manufacturer: Scootertuning.ca
Replacement H9 halogen 12V 55W headlight bulb with PGJ19-5 base. Please compare item specifics with your current bulb for compatibility.
Reference: VC30979
Manufacturer: Scootertuning.ca
Replacement H11 halogen 12V 55W headlight bulb with PGJ19-2 base. Please compare item specifics with your current bulb for compatibility.
Reference: VC19856
Manufacturer: Scootertuning.ca
Replacement orange 12V 10W indicator bulb with BA15S fitment, suitable for indicators using clear lenses. Please compare item specifics with your current bulb for compatibility.
Reference: VC15485
Manufacturer: Scootertuning.ca
Replacement clear R10W 12V 10W indicator bulb with BA15S fitment, suitable for indicators using orange lenses. Please compare item specifics with your current bulb for compatibility.
Reference: VC19733
Manufacturer: Scootertuning.ca
Replacement clear 12V 5W indicator bulb (small head) with BA15S fitment, suitable for indicators using orange lenses. Please compare item specifics with your current bulb for compatibility.
Reference: VC30986
Manufacturer: Scootertuning.ca
Replacement PY21W orange 12V 21W indicator bulb with BAU15s fitment, suitable for indicators using clear lenses. Please compare item specifics with your current bulb for compatibility.
Reference: WP-2590
Manufacturer: Buzzetti
Choice of headlamp bulbs in OEM quality. Please check whether this corresponds with voltage and base of the original bulb before ordering. H4 (HS1) 12V/35W
Reference: 476179
Manufacturer: Scootertuning.ca
The halogen bulbs used in nearly all of the double and quattro optics can now also be purchased in a mirror-like style. Amazing look and excellent luminous efficacy!
Reference: 04-137
Manufacturer: Scootertuning.ca
Replacement H4 12V 35W headlight bulb with P43t base. Please compare item specifics with your current bulb for compatibility.
Reference: P24273
Manufacturer: Replay