No products
High-quality replacement gudgeon pin circlips from Malossi for 10mm and...
The HAT weights are very durable and self lubricating. Available in a...
Pro Taper is well known for manufacturing high-quality grips and...
Budget weights by Motoforce, choice of weights. Available in a range of...
Replacement reed valve gasket for all Minarelli Horizontal engines.
The thermal grade of the spark-plug is of prime importance with tuning...
We can offer high-quality exhaust gaskets for all common original, sport...
The Polini FOR RACE crankshafts are developed to increase the...
The Polini FOR RACE crankshafts are developed to increase the...
Ready to bring your bike into a class...
Reference: STR-667.10
Brand: Str8
Please note that you will need 1 resistor per side.
Reference: KO-KD006000
Brand: Koso
Electronic flashlight relays don't have the typical clicking sound known from mechanical relays and are less prone to defects. The relays are ideal to solve the problem of LED indicators that flash too slow, too fast or not at all. Can also be used in combination with standard bulbs. Attention: fit only if there is a single relais for your scooter that...
Reference: STR-667.00
Brand: Str8
These mechanical flashlight relays are ideal to solve the problem of LED indicators that flash too slow, too fast, or not at all. Can also be used in combination with standard bulbs. The typical clicking sound of a mechanical relay has been kept. Depending on your scooter model, you may also require the STR8 resistor (STR-667.10) for the LED indicators to...
Reference: UN05981
Brand: Scootertuning.ca
Reference: UN059843
Brand: Scootertuning.ca
Reference: UN50015
Brand: Scootertuning.ca
Reference: IP34993
Brand: Scootertuning.ca
Load resistor with 25w and 10 ohm for LED indicators. Required for any LED upgrade. The resistor evens out the missing current form the standard light and gaurantees the required flashing frequency. Note: one per side required.
Reference: IP32336
Brand: Scootertuning.ca
Electronic indicator flasher relay unit with 3 pins for with incandescent and LED indicators. Fits most 2-stroke and 4-stroke scooters, mopeds and quad or ATVs. The flashing frequency automatically adjusts to LED or indicator with standard lamps. Max. 10A.0
Reference: STR-690.01
Brand: Str8
License plate light with 5 LEDs. Mounting materials are included. It is street-legal.
Reference: STR-697.10/BK
Brand: Str8
If you want more light, better vision and visibility and more safety, try this STR8 Halogen Headlight black. It is an additional lamp that is connected to your 12V battery.
Reference: SCT-LPS422/BK
Brand: Scootertuning.ca
12V License plate screw with white led light included.
Reference: IP21119
Brand: Scootertuning.ca
Very small, electronic indicator relay with 2 pins for normal indicators with bulbs or LEDs. Suitable for most 2- and 4-stroke scooters, geared mopeds and quads / ATVs. The relay operates from 1-100w and uses less power with small LED indicators.
Reference: IP32365
Brand: Scootertuning.ca
12V replacement indicator relay / flasher unit. This relay is used in many vehicle brands. It features a 90 ° offset 2-pin connector. For security, please compare your component with that in the image required photo flasher, since year of manufacturer may determine whether a different relay has been used.
Reference: NK390.32
Brand: Naraku
High-quality electronic indicator relay for conventional indicators with bulbs, as well as LED indicators. Suitable for most 2-stroke and 4-stroke scooters, geared mopeds, motorcycles and quad / ATVs The flashing frequency adjusts automatically for the LED or standard bulbs. Total output of the relay is up to 150W; more than enough for all types of...
Reference: TRS-LIR002
Brand: TRS
Our Flasher works on Honda Grom and used on Both ATR and DAn Max GY6 Harness. This fixes no flash or hyperflash. Plugs in directly. We need to turn dial to get desired flash rate. Elimates the need for tapping wires to install load resistors. This is NOT for OEM Honda Ruckus must use Resistor or our Relay in related items below.
Reference: P28735
Brand: Replay
Reference: P34926
Brand: Replay
Reference: CH-GJ-1020
Brand: Chimera
Gojin AC to DC Rectifier for Honda Grom 125! 100% plug and play! No need to de-pin any wires or anything fancy! Simply remove the stock rectifier and swap this one in!
Reference: STR-599.11/BK
Brand: Str8