No products
High-quality replacement gudgeon pin circlips from Malossi for 10mm and...
The HAT weights are very durable and self lubricating. Available in a...
Pro Taper is well known for manufacturing high-quality grips and...
Budget weights by Motoforce, choice of weights. Available in a range of...
Replacement reed valve gasket for all Minarelli Horizontal engines.
The thermal grade of the spark-plug is of prime importance with tuning...
We can offer high-quality exhaust gaskets for all common original, sport...
The Polini FOR RACE crankshafts are developed to increase the...
The Polini FOR RACE crankshafts are developed to increase the...
Reference: TRS-LSL/WH
Brand: TRS
Looking for a seat frame to move you back and low? We got it ! Comes with all stainless hardware, anodized washers and powdercoated gloss white finish.
Reference: RH-188
Brand: Ruckhouse
These lugs allow you to run our M12x1.5 Flat Lug Nuts with a Gy6 Rear Hub with M10x1.5 bolt hole. No need to drill and tap your hub or open the hole on your wheel . Most wheel come with M10 holes not M12 . Put wheel on with these, insert washer then Flat Lug Nut and you now have the look of Lugs without any mods. We recommend Red Loctite on both hub and...
Reference: RH-042
Brand: Ruckhouse
Reference: RH-044
Brand: Ruckhouse
Reference: RH-045
Brand: Ruckhouse
Reference: RH-047
Brand: Ruckhouse
Reference: RH-041
Brand: Ruckhouse
Stop running car lug nut on a Flat Douglas or Custom Ruckus wheel! They do not allow proper tightening due to lack of surface area and over time they will wallow out the wheel holes. We got the fix!! Our lug nuts are flat for proper surface area on most flat wheels such as Douglas or any of our wheel sets. These are M12x 1.5 thread pitch please check your...
Reference: TRS-MFB/SH
Brand: TRS
Looking to upgrade your stock frame bolts, we can offer here the correct thread and pitch for the honda Ruckus Frame. Grade 12.9 steel zinc plated for corrossion resistance. Include stainless steel washers.
Reference: SCT-114-52
Brand: Ruckhouse
Reference: SCT-KRMH1001
Brand: Ruckhouse
Looking to run a fatty rim on a honda ruckus motor (GET) here's the hub you need. This hub as been modified to directly fit with 4/137 wheel.
Reference: TRS-SMF
Brand: TRS
The days of BMX Bear claw foot pedals, riding a bike with no helmet, and playing tackle football with no pads on Saturday morning are long gone. Everything these days has to be revised for us. Our new design has rounded ends to help prevent boo-boos and still knurled to help with foot grip. SUPER CLEAN LOOK These foot pegs are constructed from 6061-T6...
Reference: TRS-RR085/BK
Brand: TRS
Got Lowered Racebars but handlebars hit the tank? We got the solution. We have made riser in both 21mm (.85") and 38mm (1.5"). allows riders better sitting positions, Made right here at our shop from Billet 6061 and hard Anodized black. Comes with Stainless Hardware and fits between OEM risers and our Racebars. Taller riders over 6 feet tall we recommend...
Reference: TRS-RR15/BK
Brand: TRS
Got Lowered Racebars but handlebars hit the tank? We got the solution. We have made riser in both 21mm (.85") and 38mm (1.5"). allows riders better sitting positions, Made right here at our shop from Billet 6061 and hard Anodized black. Comes with Stainless Hardware and fits between OEM risers and our Racebars. Taller riders over 6 feet tall we recommend...
Reference: TRS-RRE001
Brand: TRS
Looking for a way to run some of the newer 2017 Honda Grom Exhausts with your TRS ‘RaceSets’ Rear Sets? Here is your solution! 3D Machined from 6061 Aluminum, this gives your 2017 Exhaust the mounting point it needs! Comes with Stainless Bolt for mounting Exhaust to the bracket… uses the existing hardware the RaceSets come with for mounting to the brake...
Reference: TRS-RAC005
Brand: TRS
Did you know your Ruckus radiator has a nice aluminum finish? Probably not since you can’t see it under the stock cover. Let your radiator shine through with one of our unique radiator covers. These are laser cut sweetness that your ride is calling for. It’s a simple swap out and the contrast really brings a great graphic element to an otherwise boring...
Reference: TRS-RCFI24/AL
Brand: TRS
Did you know your Ruckus radiator has a nice aluminum finish? Probably not since you can’t see it under the stock cover. Let your radiator shine through with one of our unique radiator covers. These are 6160 aluminum cut sweetness that your ride is calling for. It’s a simple swap out and the contrast really brings a great graphic element to an otherwise...
Reference: TRS-RCFI24/BK
Brand: TRS
Looking for something different? There is the TRS VIP Series 2 Toned. They anodize these first and then cut pattern for a truely unique look. Limited production! These are 6160 aluminum cut sweetness that your ride is calling for. It’s a simple swap out and the contrast really brings a great graphic element to an otherwise boring part of your bike. 1/4”...
Reference: TRS-RCVL32/AL
Brand: TRS
Did you know your Ruckus radiator has a nice aluminum finish? Probably not since you can’t see it under the stock cover. Let your radiator shine through with one of our unique radiator covers. These are 6160 aluminum cut sweetness that your ride is calling for. It’s a simple swap out and the contrast really brings a great graphic element to an otherwise...
Reference: TRS-RCVL32/BK
Brand: TRS
Looking for something different? There is the TRS VIP Series 2 Toned. They anodize these first and then cut pattern for a truely unique look. Limited production! These are 6160 aluminum cut sweetness that your ride is calling for. It’s a simple swap out and the contrast really brings a great graphic element to an otherwise boring part of your bike. 1/4”...
Reference: TRS-FBADK
Brand: TRS
This fender bracket allows for you to keep your oem Honda Ruckus rear fender when doing any of our TRS airbox delete kits. The bracket and hardware are included in this kit and will be a quick install. The nylock nut will go under the fender securing the fender to the bracket and then the other m6 bolt will secure the bracket to the open hole on your...
Reference: RH-177
Brand: Ruckhouse
Looking to lower the rear of your Honda GROM a bit to go with the lower front end? Want to lower it without NEEDING* to install a stretch? Here you go! Kit requires no drilling, and can be installed easily with the bike properly supported (because you have to remove the rear shock). You do not need to remove the chain/wheel/etc to install! The Ruckhouse...
Reference: RH-178
Brand: Ruckhouse
Looking to lower the rear of your Honda GROM a bit to go with the lower front end? Want to lower it without NEEDING* to install a stretch? Here you go! Kit requires no drilling, and can be installed easily with the bike properly supported (because you have to remove the rear shock). You do not need to remove the chain/wheel/etc to install! The Ruckhouse...
Reference: RH-179
Brand: Ruckhouse
Looking to lower the rear of your Honda GROM a bit to go with the lower front end? Want to lower it without NEEDING* to install a stretch? Here you go! Kit requires no drilling, and can be installed easily with the bike properly supported (because you have to remove the rear shock). You do not need to remove the chain/wheel/etc to install! The Ruckhouse...
Reference: RH-180
Brand: Ruckhouse
Looking to lower the rear of your Honda GROM a bit to go with the lower front end? Want to lower it without NEEDING* to install a stretch? Here you go! Kit requires no drilling, and can be installed easily with the bike properly supported (because you have to remove the rear shock). You do not need to remove the chain/wheel/etc to install! The Ruckhouse...
Reference: TRS-RSB5220/MI
Brand: TRS
The TRS rearset backs are a great addition to your ruckus for that sportbike feel. Attaches to side of frame using stock holes and provided stainless hardware. Raw Billet Aluminum 6061 1/2" plate SUPER THICK AND STRONG; Mounts to your stock engine mount location; Pegs NOT included, however any aftermarket pegs will work! Made in USA.
Reference: TRS-RSB5220/OP
Brand: TRS
The TRS rearset backs are a great addition to your ruckus for that sportbike feel. Attaches to side of frame using stock holes and provided stainless hardware. Raw Billet Aluminum 6061 1/2" plate SUPER THICK AND STRONG; Mounts to your stock engine mount location; Pegs NOT included, however any aftermarket pegs will work! Made in USA.
Reference: TRS-TR004/BK
Brand: TRS
Always trying to find a way to tie down your Ruckus? Mounting easily to the rear frame (Seat Area) with supplied hardware in minutes giving you a sturdy place to attach tie-downs to your Ruckus. Keep the rear from bouncing around. Ideal for mounting in the bed of a truck, a lift or a trailer. CNC machined from solid billet AL6061-T6 aluminum for maximum...
Reference: TRS-RPP041-1
Brand: TRS
If you have removed the Stock Airbox or purchased one of our Airbox eliminator kits you have to plug the REED Valve also called a PAIR or PAR valve. You can use a Cap or Plug like seen in the photo. Or you can use a Billet CNC Block off Plate. Why spend $$$$ on the big stuff and leave the little stuff out. Made from 6160 Billet Aluminum comes with...
Reference: TRS-RPP041-2
Brand: TRS
If you have removed the Stock Airbox or purchased one of our Airbox eliminator kits you have to plug the REED Valve also called a PAIR or PAR valve. You can use a Cap or Plug like seen in the photo. Or you can use a Billet CNC Block off Plate. Why spend $$$$ on the big stuff and leave the little stuff out. Made from 6160 Billet Aluminum comes with...
Reference: TRS-R5P001
Brand: Scootertuning.ca
The rectifier/controller converts the alternating voltage from the alternator into the DC for the on board computer. This keeps the battery charged and ensures that bulbs do not blow etc. This piece is exposed to extreme temperature loading and can often become damaged. If the rectifier/controller is defective, the battery is constantly empty and on some...
Reference: TRS-RCB072
Brand: TRS
Dorbyworks GY6 engine reinforcement stainless steel case brace. Raw high quality stainless steel, no rust!!! Can be high mirror polished or powder coated to match your bike for a custom engine look! Fit both ''A'' and ''B'' case GY6 Long Case.
Reference: SCT-151-101
Brand: Scootertuning.ca
Rocker Arms for use on heads with 64mm Valves found on 50cc 4-stroke QMB139 engines.
Reference: SCT-151-247
Brand: Scootertuning.ca
Rocker Arms for use on heads with 69mm Valves found on 50cc 4-stroke QMB139 engines.
Reference: RH-181
Brand: Ruckhouse
These Ruckhouse front Fork adapters will drastically lower the front end and work great with the shock lowering brackets giving the bike a whole new look. Comes with fork adapters and a spacer kit which properly centers the stock rim and caliper. These adapters will not work with the larger OEM Ruckus forks or ATR These are designed to install in place of...
Reference: TRS-RHB012/BK
Brand: TRS
TRS RUCKEYES works on bolt 2014-2015 models and 2018+ models. Finished off with Billet washers and Stainless steel hardware. Comes in Raw or Anodized black. Allows you to add our LED Turn signals and Bezels. (See Related Items NOT INCLUDED) Comes with USA made Headlight Harness no need to buy OEM one. All connections and terminals supplied. Simple...