No products
Complete engine package for Yamaha Bws 2002-2011. Package include...
Complete engine package for Yamaha Bws 2002-2011. Package include...
Complete engine package for Yamaha Bws 2002-2011. Package include...
These customizable kits will include everything needed to fit a Lectron...
Custom 6061 heat treated aircraft grade aluminium rear fatty wheel....
Custom 6061 heat treated aircraft grade aluminium wheel set made for...
Custom 6061 heat treated aircraft grade aluminium rear fatty wheel....
Custom 6061 heat treated aircraft grade aluminium front wheel. Several...
Custom 6061 heat treated aircraft grade aluminium wheel set made for...
Custom 6061 heat treated aircraft grade aluminium rear wheel for Honda...
Custom 6061 heat treated aircraft grade aluminium wheel set for Honda...
The Corsa is a Polini Powerfull...
Reference: WB-5034
Brand: Buzzetti
Universal tool to quickly remove bearings, e.g. stubborn bearings on the crankshaft. For bearings with a diameter of 19 - 45mm.
Reference: WB-5032
Brand: Buzzetti
Buzzetti bearing puller to quickly remove internal bearings, e.g. the ones in the gearbox or wheel bearings. For bearings with an internal diameter of 8–25mm.
Reference: WP-2590
Brand: Buzzetti
Choice of headlamp bulbs in OEM quality. Please check whether this corresponds with voltage and base of the original bulb before ordering. H4 (HS1) 12V/35W
Reference: WB-5654
Brand: Buzzetti
If you prefer to work on your scoot alone, or if there is simply no helping hand to be had, you can use the clutch spring compressor to easily replace the torque spring. No more damaged threads because the clutch nut hasn't been screwed on properly.
Reference: WB-5038
Brand: Buzzetti
This Buzzetti tool allows you to separate the crankcases, without having to resort to a hammer and thus without damage to crankshaft or cases. All you have to do is place the tool onto the end of the crankshaft and screw it against the block. Please make sure to remove the crankcase bolts beforehand!
Reference: WB-5070
Brand: Buzzetti
This is an indispensable tool that you will need when taking off main bearings without damaging the intact crankshaft. It is definitely a must-have with racing set-ups, where the main bearings have to be replaced more often in order to prevent subsequent damage.
Reference: WB-4913
Brand: Buzzetti
Damaged screw heads can cause a lot of grief. This bit set lets you remove the old screw applying a left-hand thread, without damaging the thread. 3-12mm
Reference: WB-5376
Brand: Buzzetti
A flywheel puller to remove the rotor of the alternator; necessary when working on the alternator or any components situated underneath and when replacing the crankshaft or changing bearings. The puller will be screwed into the threads provided in the rotor; then the centre bolt will be tightened to exert steady pressure to draw the rotor off the...
Reference: 15363
Brand: Buzzetti
A flywheel puller to remove the rotor of the alternator; necessary when working on the alternator or any components situated underneath and when changing bearings or replacing the crankshaft. The puller's body will be screwed into the threads provided in the rotor; then the centre bolt will be tightened to exert steady pressure to draw the rotor off the...
Reference: BZT30540
Brand: Buzzetti
This Buzzetti hand impact driver allows you to loosen stubborn screws and nuts. The direction of the impact driver can be also be reversed. Comes with 6 bits (3x Phillips, 1x slot, 1x 6mm and 1x 8mm hex head).
Reference: 21745
Brand: Buzzetti
Micrometre-measuring screw allows you to find TDC (top dead centre) in the piston stroke. A must for tuners! Allows for precise tuning of ignition points.
Reference: 4543
Brand: Buzzetti
We stock RMS and Buzzetti sidestands for most models. The stands come complete with all the bits and pieces needed for their installation. Simply bolted to the frame.