No products
High-quality replacement gudgeon pin circlips from Malossi for 10mm and...
The HAT weights are very durable and self lubricating. Available in a...
Pro Taper is well known for manufacturing high-quality grips and...
Budget weights by Motoforce, choice of weights. Available in a range of...
Replacement reed valve gasket for all Minarelli Horizontal engines.
The thermal grade of the spark-plug is of prime importance with tuning...
We can offer high-quality exhaust gaskets for all common original, sport...
The Polini FOR RACE crankshafts are developed to increase the...
The Polini FOR RACE crankshafts are developed to increase the...
We can offer here handlebar black end...
Reference: GY14625
Brand: Scootertuning.ca
Low-cost standard brake disc in original quality. This brake disc has 3 mounting points and a diameter of 180mm. For front and rear disc brakes with 180mm external diameter.
Reference: U-114
Brand: Scootertuning.ca
For piaggio vespa ET4 50
Reference: U-102
Brand: Scootertuning.ca
Reference: U-103
Brand: Scootertuning.ca
710mm x 18.10 x 8.50 30 degrees PIAGGIO VESPA ET2 - CARBURATORE 50 cc 1998/2005 PIAGGIO VESPA ET2 I.E 50 cc 1997/2000 PIAGGIO VESPA ET4 ARIA 50 cc 2000/2005 PIAGGIO VESPA LX 2T 50 cc 2005/2013 PIAGGIO VESPA LX 2T TOURING 50 cc2010/2013 PIAGGIO VESPA LX 4T 4V / TOURING 50 cc 2009/2013 PIAGGIO VESPA LX 4T 50 cc 2005/2009 PIAGGIO VESPA LX FL 2T 50...
Reference: U-099
Brand: Scootertuning.ca
758mm x 17.50 x 8.50 28 degrees
Reference: VC25928
Brand: Scootertuning.ca
Aramid reinforced belt from well respected Italian company Dayco, sister company to Pirelli. The woven aramid fibre makes this belt much more durable than standard V-belts. Dayco belts meet the highest standard and are preferably used in Maxi scooters or motor scooters with higher capacity and power however can also be used as a replacement belt and are...
Reference: VC30908
Brand: Scootertuning.ca
ramid reinforced belt from well respected Italian company Dayco, sister company to Pirelli. The woven aramid fibre makes this belt much more durable than standard V-belts. Dayco belts meet the highest standard and are preferably used in Maxi scooters or motor scooters with higher capacity and power however can also be used as a replacement belt and are...
Reference: 23674
Brand: Scootertuning.ca
Aramid-reinforced drive belt for increased service life, extra flexibility and better power transfer. For maxi-scooters with water-cooled 125-150cc Honda 4-stroke engines.
Reference: A268126
Brand: Scootertuning.ca
Reference: VC30920
Brand: Scootertuning.ca
PLEASE CHECK YOUR OEM BELT DIMENSION BEFORE ORDERING! High-quality Mitsuboshi drive belt for high performance engines and compact drive systems. Reinforced side walls for better power transfer, and the materials make it more oil-resistant and less sensitive to heat build-up. Dimensions: 772*16.5
Reference: VC24950
Brand: Scootertuning.ca
Good quality replacement drive belt for Honda Zoomer, Ruckus und Metropolitan 50cc scooters. Dimensions: 797x18
Reference: GY14655
Brand: Scootertuning.ca
Primary gear shaft for Chinese 125/150cc scooters with the 152/157QMI engine. This is where the clutch is mounted. This gear has 15 teeth as per original item.
Reference: BT13868
Brand: Scootertuning.ca
Gearbox input shaft for GY6 139QMB/QMA. This is where the clutch and converter pack are mounted.
Reference: NK200.24
Brand: Scootertuning.ca
E-choke for scooters with Mikuni carbs or Chinese Minarelli-based 2-stroke engines e.g. CPI, Keeway, Generic, Mawi, Longija etc.
Reference: GY14682
Brand: Scootertuning.ca
Starter motor for GY6 125/150cc, supplied with connector cable.
Reference: BT11002
Brand: Scootertuning.ca
Starter motor, suitable for all Chinese-built 4-stroke engines. This item can be used without a problem, even where the originally fitted item has an additional green earth cable.
Reference: IP33165
Brand: Scootertuning.ca
Replacement 12V 0.15KW starter motor with 11 teeth for Piaggio, Gilera, Kymco and Sym 50cc scooters.
Reference: BT12281
Brand: Scootertuning.ca
This bearing set contains all the relevant bearings found within the engine. A complete kit, at a low price. Crank main bearings not included. Not available as single items, owing to the huge risk on the timing chain sit of the crank when installing. Where new main bearings are required, we recommend buying a new crank. The bearings come pre-installed and...
Reference: BM07102-08
Brand: Scootertuning.ca
Styling screws set for PGO and Genuine scooter CVT cover.
Reference: BM07102-02
Brand: Scootertuning.ca
Styling screws set for PGO and Genuine scooter CVT cover.
Reference: BM07102-09
Brand: Scootertuning.ca
Styling screws set for PGO and Genuine scooter CVT cover.
Reference: STR-550.77/VA
Brand: Scootertuning.ca
Hexagon socket screws for the STR8 engine case. Their quality is quite a bit higher than the aluminium version, though in a plainer design. Thanks to the material used for these screws, you won't have any problems with rust.
Reference: 32102
Brand: Scootertuning.ca
Cylinder cover for air cooled vertical Minarelli engines. This is an essential part of the cooling system on air cooled bikes, if you cover is missing or damaged, this could result in overheating.
Reference: 80101-GAH-000
Brand: Scootertuning.ca
Reference: GY18250
Brand: Scootertuning.ca
Dowel pin set for 125/150cc GY6 engines. Delivery contains: 6x dowel pins for M8 and 8x dowel pins for M6.
Reference: BT14247
Brand: Scootertuning.ca
Dowel pin set for 50cc GY6 engines Delivery contains: 6x dowel pins for M7 (cylinder, cylinder head) 6x dowel pins for M6 (engine cases, crankcase cover), 1x dowel pin M8 (gearbox cover).
Reference: BT13841
Brand: Scootertuning.ca
Complete engine gasket set for 125cc GY6 engines with 743mm v-belts (152QMI engines). Set contains all the servicing-relevant gaskets: a cheaper option than buying them all separately. Crank oil seals not included. We offer these as part of a crank seal set. This set can also be used on 150cc variants, but this requires you to order the 150cc head gasket;...
Reference: GY18249
Brand: Scootertuning.ca
Complete engine gasket set for 125/150cc GY6 engines (152QMI). Contains all relevant gaskets. Cheaper than individual purchasing. Does not include engine shaft seals, we offer these as a separate set.
Reference: KW14872
Brand: Scootertuning.ca
Engine gasket set for Minarelli-based Chinese-built 2-stroke engines e.g. CPI, Keeway, Generic, Mawi, Longija etc. Set contains all relevant paper gaskets, as well as head and exhaust manifold gaskets.
Reference: P400485850162
Brand: Scootertuning.ca
Athena offers the most complete range of gaskets and gasket sets for every make and model of motorcycles, jet-ski, snow-mobiles and outboards in the world. The quality of our gaskets replaces and exceeds the seal offered by the original products. Our long time experience gained in supplying most prestigious OEM Motorcycle manufacturers, has brought to our...
Reference: BT36001
Brand: Scootertuning.ca
Complete engine gasket set for all Chinese-built 4-stroke GY6 139QMB/QMA scooters with 10” wheels; v-belt length 669mm, crank-gearbox input shaft 22.5cm. ATTENTION: Crankcase cover gasket does not fit on 12” wheel vehicles. There is a specific set for these models in our range. Set does not include crank seals; we offer these in a separate set.
Reference: BT13853
Brand: Scootertuning.ca
Complete engine gasket set for all Chinese-built 4-stroke GY6 139QMB/QMA scooters with 12” wheels and short engine block; v-belt length 729mm, crank-gearbox input shaft 22.5cm. ATTENTION: Crankcase cover gasket does not fit on 10” wheel vehicles. There is a specific set for these models in our range. Set does not include crank seals; we offer these in a...
Reference: BT18092
Brand: Scootertuning.ca
Complete engine gasket set for 50cc GY 139QMB/QMA engined scooters with 12” wheels or larger; v-belt length 788mm, crank-gearbox input shaft 28cm. This gasket set contains all the gaskets needed for complete serving. A far more low-cost alternative to buying individually and you won’t leave any out. Set does not include crank seals; we offer these in a...
Reference: BT27505
Brand: Scootertuning.ca
Replacement motor bearings for scooters. Dimensions (Internal x External x Width): 10x30x30mm
Reference: GY15430
Brand: Scootertuning.ca
Bolt and nut set for GY6 125/150cc engines. Set contains almost all bolts, oil draining plugs, nuts, cylinder studs etc. Ordering individual engine bolts can be expensive, so here we offer a complete set at a fair price. Set pictured here is the complete set.
Reference: BT13886
Brand: Scootertuning.ca
Bolt and nut set for GY6 50cc 139QMB/QMA engines. Set contains almost all bolts, oil draining plugs, nuts, cylinder studs etc. Ordering individual engine bolts can be expensive, so here we offer a complete set at a fair price. Set pictured here is the complete set.