No products
High-quality replacement gudgeon pin circlips from Malossi for 10mm and...
The HAT weights are very durable and self lubricating. Available in a...
Pro Taper is well known for manufacturing high-quality grips and...
Budget weights by Motoforce, choice of weights. Available in a range of...
Replacement reed valve gasket for all Minarelli Horizontal engines.
The thermal grade of the spark-plug is of prime importance with tuning...
In order to offer optimal handling, a dragrace handlebar should be...
Replacement Piston for the Stage 6 Streetrace 50cc 12mm Minarelli / Piaggio
Replacement Piston for the Stage 6 Streetrace 50cc 10mm minarelli
Universal speedometer for supermotos, scooters etc. featuring all...
Universal speedometer for supermotos, scooters etc. featuring all...
Universal speedometer for supermotos, scooters etc. featuring all...
The pulley is CNC machined from high quality aluminium and is suitable...
This intake funnel with grille combines the advantages of an open intake...
Polini also offer a two-part intake...
Reference: 1115380B
Brand: Malossi
Replacement gasket set for the MHR Team Testa Rossa 94cc cylinder kit (minarelli horizontal).
Reference: 2514521
Brand: Malossi
Malossi is pleased to announce two new gear-box covers for scooters and Piaggio 50 cc engines, designed for racing and for a sport upgrade of standard production scooters. Malossi, after revisiting the gear box assembly, has reduced friction drastically by replacing the original cover with two new gravity cast covers, assembled with special bearings....
Reference: 6617436B
Brand: Malossi
Reference: 2515482
Brand: Malossi
A reinforced gear cover is essential for stronger tuned engines. In contrast to the original cover, this Malossi version is equipped with needle bearings for the intermediate shaft and the wheel shaft. The 2008 version now also fits in conjunction with Malossi Overrange torque drivers, but when being used with the Polini Evolution torque driver, it will...
Reference: 7615375B
Brand: Malossi
The new MALOSSI 7.1 MHR GREASE, recommended for use in extreme conditions or with operating temperatures up to 160° C. MALOSSI 7.1 MHR GREASE is recommended for the lubrication of scooter variators and rear pulley assemblies, operating under severe load and temperature conditions; specifically it guarantees perfect lubrication between the hub and half...
Reference: 2715092
Brand: Malossi
After the great success of 560cc bi-cylinder together with Double Power Cam, head valves could not miss! Malossi technicians have worked to achieve even better performance. These new valves have a bigger diameter and excellent materials and they are completely re-profiled in order to reach the best performance at all revolutions. These valves are...
Reference: 5519540
Brand: Malossi
Malossi Force Master 2 CDI injection module for Piaggio 300cc 4-stroke maxi scooters with fuel injected engines. This injection module not only sets the rev limiter at 10,000 RPM but also has 4 different advance curves that can be set to the riders preferred setting.
Reference: 5519632
Brand: Malossi
Manages multiple maps simultaneously without having to resort to a hand-held device, with just a simple click. Ability to shift the selected map by moving the OFFSET (± 2°). The inner rotor ignition systems designed by Malossi are based on the state-of-the-art technology applied to racing. Such a new system resulted from the need to overcome the technical...
Reference: MAL11362
Brand: Malossi
This mounting kit is required to fit 17.5-21mm Dellorto & 17.5-21 mm Polini CP carburettors with slot connectors to the original inlet manifold. The kit contains: Malossi bigger adaptor, connector rubber and ring clips. The metal connector has an internal diameter of 17.5mm. Dimension rubber : inside diameter: 23mm.
Reference: 028400B
Brand: Malossi
Intake Manifold Minarelli Vertical d=20,5x23mm PHGB 12-21mm Malossi
Reference: 028479B
Brand: Malossi
Intake Manifold Malossi NBR 21x27mm Minarelli vertical
Reference: SCT-IN-RC1
Brand: Malossi
Oversize intake allowing to run the PWK 30-34mm Carburetor with 40mm external diameter on the Malossi C-One and RC-One engines. The exact intake size is 35mm but made with soft rubber so it can work with 40mm external diameter carb with streching.
Reference: 2013800
Brand: Malossi
These new intake manifolds are supplied split up: the intake rubber can be rotated into the flange according to the specific requirements of the vehicle, in order to locate which is the best angle for the carburettor assembly.
Reference: 2013801
Brand: Malossi
These new intake manifolds are supplied split up: the intake rubber can be rotated into the flange according to the specific requirements of the vehicle, in order to locate which is the best angle for the carburettor assembly.
Reference: 2013802
Brand: Malossi
Malossi has a two-part intake manifold on offer to match the bulky Dellorto VHST carburators. This manifold consists of a base plate and a flexible, angled rubber sleeve, which will be clamped between base plate and engine intake. The inlet manifold has an internal diameter of 30mm and a connection diameter of 35mm.
Reference: 5519633
Brand: Malossi
Manages multiple maps simultaneously without having to resort to a hand-held device, with just a simple click. Ability to shift the selected map by moving the OFFSET (± 2°). The inner rotor ignition systems designed by Malossi are based on the state-of-the-art technology applied to racing. Such a new system resulted from the need to overcome the technical...
Reference: 5519630
Brand: Malossi
Manages multiple maps simultaneously without having to resort to a hand-held device, with just a simple click. Ability to shift the selected map by moving the OFFSET (± 2°). The inner rotor ignition systems designed by Malossi are based on the state-of-the-art technology applied to racing. Such a new system resulted from the need to overcome the technical...
Reference: 242094
Brand: Malossi
Knowing where your tools and small parts are is essential for any DIY mechanic. With this Malossi assortment box, you always have the right jet size at hand. Holds up to 24 main jets.
Reference: 6713602
Brand: Malossi
For highly tuned engines, you need a longer transmission to transform the extra power gained through tuning into higher speed.
Reference: 527643
Brand: Malossi
Malossi offers here their popular high quality Delta clutch. You can easily adjust the rotational speed at which the clutch engages thanks to the fully adjustable spring arm system. Like other well-known racing clutches, this one also comes with a reinforcing ring to minimize twisting due to centrifugal forces. Malossi also offers a set of ultra-rigid...
Reference: 529451
Brand: Malossi
Malossi offers here their popular high quality Delta clutch. You can easily adjust the rotational speed at which the clutch engages thanks to the fully adjustable spring arm system. Like other well-known racing clutches, this one also comes with a reinforcing ring to minimize twisting due to centrifugal forces. Malossi also offers a set of ultra-rigid...
Reference: 527880
Brand: Malossi
Very durable high quality clutch with three shoes and large linings. It is also equipped with several lock-in positions that allow for adjusting spring preload, which takes a bit of skill and strength, though. A great choice for high end engines.
Reference: 303339
Brand: Malossi
With this new transparent float bowl from Malossi, changing the main jets becomes dead easy. Thanks to a small round screw cap, you can easily replace the main jets and also spare the float bowl gasket. The transparent float bowl also lets you see at first glance if it contains fuel. Attention: only for DellOrto PHBG carburettor!
Reference: 528797
Brand: Malossi
High quality sport clutch from Malossi. Can be adjusted via differently strong springs. High quality linings ensure good grip also when the transmission is hot. The clutch engages at higher revs. Stronger springs are available.
Reference: 7613469B
Brand: Malossi
Advanced specification gear and transmission oil. It contains E.P. additives which protect transmission parts even under severe shock load conditions and give outstanding long life wear resistance. By reducing viscous drag and friction, the product ensures smooth and slick gear changes, reducing wear and transmission power losses. The unique thermally...
Reference: 6112801B
Brand: Malossi
Replacement overange variator hub
Reference: MAL003
Brand: Malossi
Individual stickers with the well-known Malossi logo, available in different sizes.
Reference: MAL005
Brand: Malossi
Individual stickers with the well-known Malossi logo, available in different sizes.
Reference: MAL002
Brand: Malossi
Individual stickers with the well-known Malossi logo, available in different sizes.
Reference: 339780
Brand: Malossi
A large A3 sticker set from Malossi with different stickers like the Malossi Lion, MHR logo etc
Reference: 7713369
Brand: Malossi
Technical Specifications : Clutch Bell forged using Fe DC04 deep-drawing steel; Carbon steel centre hub made of round stock and TIG welded; Anti-vibration band welded using a 3 point 120° pattern; 100% dynamically balanced; Surface hardened through nitriding.
Reference: 069854E
Brand: Malossi
Replacemet O-ring set for the MHR Overange 2005 rear pulley.
Reference: 0616248
Brand: Malossi
Replacement Oring set for the MHR Overange 2013 (La furia rossa) rear pulley.