No products
High-quality replacement gudgeon pin circlips from Malossi for 10mm and...
The HAT weights are very durable and self lubricating. Available in a...
Pro Taper is well known for manufacturing high-quality grips and...
Budget weights by Motoforce, choice of weights. Available in a range of...
Replacement reed valve gasket for all Minarelli Horizontal engines.
The thermal grade of the spark-plug is of prime importance with tuning...
We can offer high-quality exhaust gaskets for all common original, sport...
Here is the second version of the famous MOST Racing oil pan cap for...
Most offers us here its new high-quality oil pan cap cut from solid...
Quickly recognizable thanks to the MOST Racing logos on the length and...
Quickly recognizable thanks to the MOST Racing logos on the length and...
MOST Racing offers a clutch bell for scooters with horizontal and...
MOST Racing offers a reinforced transmission belt for MBK scooters with...
Scooter Racing Malossi exhausts are designed and built with one...
Replacement gasket set for Malossi Testa Rossa 70cc Minarelli Horizontal...
Reference: FLP-022
Brand: FLP
Chances are you stock frame caps already fell off. These billet caps have large rubber bands to keep them tight. Plug and play. CNC lathe finished.
Reference: FLP-023
Brand: FLP
Chances are you stock frame caps already fell off. These billet caps have large rubber bands to keep them tight. Plug and play. CNC lathe finished.
Reference: FLP-003
Brand: FLP
New turn signal frame caps from FLP these only work with Honda ruckus that are not using the stock engine mount location. You will need to bridge your turn signal wires to these signals.Machined 6061 housing. Large o ring to prevent falling out with vibration. 12V dot Led amber signals
Reference: FLP-005
Brand: FLP
Our newest edition to our Lusso line up. Billet side rails with open pockets to show case you nee paint and contrast the CNC machined aluminum. 3/8 risers are included to slightly lift the rails so you don’t scratch your tank. These do clear the new ncy gas tank covers
Reference: FLP-015
Brand: FLP
The much anticipated Minion eye is ready ! That perfect bolt on head light . Chuck out the stock candle head lights and light up road with this 7 inch led light. Kit specs : 7 inch round led with h4 wiring adapter, CNC bracket with reversible light mounts to have the light sit high or low, 3 x stand off spacers, M6 and M8 hardware, Full CNC faces no short...
Reference: FLP-016
Brand: FLP
The much anticipated Minion eye is ready ! That perfect bolt on head light . Chuck out the stock candle head lights and light up road with this 7 inch led light. Kit specs : 7 inch round led with h4 wiring adapter, CNC bracket with reversible light mounts to have the light sit high or low, 3 x stand off spacers, M6 and M8 hardware, Full CNC faces no short...
Reference: FLP-007
Brand: FLP
Insired by Mike Wazowski from Monsters Inc. These brackets allow you to replace your stock Grom headlight with a single round 7″ light. The brackets come anodized black or raw, and are built in with flush mounted turn signals. Includes: Brackets BLACK or RAW / Turn Signals amber eagle eye / Spacers / Hardware / Round 7″ LED LIGHT. You will need to buy a...
Reference: FLP-017
Brand: FLP
So you are ready to add new wheels to your ruckus BUT you don’t want to fork out 1000.00 dollars to get a full disk brake set up. This is where our Front Drum Hub comes in. BOLT ON 12 x 4 4X90 or 5x90 wheels. 100 percent bolt on. Speedometer still works. Wheel bolts included. Use you factory wheel spacer. THINGS TO KEEP IN MIND : These only work with the...
Reference: FLP-020
Brand: FLP
Maybe your ruckus is sitting low and you need some ground clearance or maybe you want to raise your gas tank and add some leds around it. This kit will raise your tank .750 – 3/4”. Includes : 4 M6 CNC dress up washers, 4 M6 x45 stainless bolts, 4 CNC stand off spacers and 4 lock nuts
Reference: FLP-002
Brand: FLP
Another billet item by FLP. Simple to install remove your stock plastic piece and install our billet cover and secure it with the set screw on the top. Works great with out billet ruckus key gives a little more clearance for locking your bars. Includes : billet cover / set screw / I key for install. Made in the USA with USA material
Reference: FLP-018
Brand: FLP
Perfect plug and play add on for your ruckus. Bolt on , no parts to be swapped over from your stock cap. Key less , just snap and go. CNC lathe and mill finish. Integrated check valve.
Reference: FLP-011
Brand: FLP
Perfect plug and play add on for your ruckus. Bolt on , no parts to be swapped over from your stock cap. Key less , just snap and go. CNC lathe and mill finish. Integrated check valve.
Reference: FLP-026
Brand: FLP
Perfect plug and play add on for your ruckus. Bolt on , no parts to be swapped over from your stock cap. Key less , just snap and go. CNC lathe and mill finish. Integrated check valve.
Reference: FLP-021
Brand: FLP
The perfect pegs for your ruckus. Easy bolt on for any ruckus. Knurled finish for no slip. Rounded head wont eat up your ankles. Seamless flush look with hidden hardware. M10 x 1.5 threads work with most foot braces.
Reference: FLP-012
Brand: FLP
Give your get some flare with the new ROYAL RAD CAP. Hides away the ugly stock radiator cap. 2 set screws secure the cap onto the your old radiator cap. Work for stretched ruckus only. The perfect match for our ROYAL gas cap. Made in USA.
Reference: FLP-019
Brand: FLP
Please read the description carefully as this hub doesn’t work for every one. This mount is made for Honda Ruckus with the stock engine. For best fitment use the following wheels specs with 12x8 fatty mount to have every thing line up center . Last photo is an example with this hub installed with the set up mentioned. 12x7 wheel. 4x110 bolt pattern with...
Reference: FLP-013
Brand: FLP
Safely mount your custom 1 piece wheels and use off the shelf metric lug nuts and have them seat up properly. Don’t risk you lug nuts coming loose with minimal surface contact on your flat faces wheels. Specs : 4 pieces 6061 washers, Made for M12 stud, 60 degree taper to fit all metric lug nuts.
Reference: FLP-014
Brand: FLP
Safely mount your custom 1 piece wheels and use off the shelf metric lug nuts and have them seat up properly. Don’t risk you lug nuts coming loose with minimal surface contact on your flat faces wheels. Specs : 4 pieces 6061 washers, Made for M12 stud, 60 degree taper to fit all metric lug nuts.
Reference: FLP-025
Brand: FLP
Cover that ugly cast triple tree with this billet CNC cover. Compatible with all Ruckus years and perfect for those of you eliminating the front fender.
Reference: FLP-009
Brand: FLP
Change out your ugly stock cast valve cover and replace it our cnc machined full billet cover . The missing link to completing your build. Roll up to the local meet spot and kill them with some billet cnc machined goodness! Specs : 6061 billet, Direct bolt on use your original honda seals, 1/8 npt tapped hole perfect to run -4 an fitting to a catch can, 5...