No products
High-quality replacement gudgeon pin circlips from Malossi for 10mm and...
The HAT weights are very durable and self lubricating. Available in a...
Replacement reed valve gasket for all Minarelli Horizontal engines.
Budget weights by Motoforce, choice of weights. Available in a range of...
Pro Taper is well known for manufacturing high-quality grips and...
The thermal grade of the spark-plug is of prime importance with tuning...
These spoilers from Str8 are available in many great colours and can...
Among insiders, the Turbo Kit name is synonymous with peak performance....
Among insiders, the Turbo Kit name is synonymous with peak performance....
Among insiders, the Turbo Kit name is synonymous with peak performance....
stage6 R/T proudly presents the MK2 version of their racing fork for...
This Super Trans Kit is one of the best dollar-for-dollar bolt-ons to...
Replacement gasket set for the Stage6 R/T FL 100cc cylinder
his cylinder is the result of years of development and dyno tests and...
Reference: TRS-DBA9912/AL
Brand: TRS
Looking to run RRGS, Adelin, ScooterTuning or NCY front forks but wanna keep the OEM drum brakes. We have a fix for ya. Simple bolt on bracket with all the hardware and spacers included. These are now in Billet 6061 aircraft aluminum and anodized in black or raw finish.
Reference: TRS-DBA9912/BK
Brand: TRS
Looking to run RRGS, Adelin, ScooterTuning or NCY front forks but wanna keep the OEM drum brakes. We have a fix for ya. Simple bolt on bracket with all the hardware and spacers included. These are now in Billet 6061 aircraft aluminum and anodized in black or raw finish.
Reference: TRS-EMFWG/GY6
Brand: TRS
TRS offer here Ruckus GY6 125-150 conversion mount. Allows you to run the 12x 7, 12x8 or 10x8 Fatty rim. Comes with an angled clocking flange. Carb must face forward. TRS mount is a SOLID piece of Billet Aluminium so it's super strong. We also include an angled clocking instead of having to purchase one. Brackets are stainless steel.
Reference: TRS-EMFWR/GET
Brand: TRS
TRS offer here Engine Mount kit conversion for use 8'' wide rims on Ruckus/Zommer with OEM engine (GET). Allows you to run the 12x8 or the 10x8 Fatty rim. TRS mount is a SOLID piece of Billet Aluminium and is super strong. The center allows more room than other mounts so the choke and TPS sensor don't get pinched. We also include 3 ft of fuel line. The...
Reference: TRS-EMSWG
Brand: TRS
Ruckus gy6 conversion mount. Allows you to run the stock cast OEM GY6 wheels commonly found on the Vento Scooters. 2.5 inch stretch kit. Our mount is a SOLID piece of 6061-T6 BILLET ALUMINUM and 100% Made right here in the USA. Brackets are Stainless Steel.
Reference: TRS-HRGWH/PSP
Brand: TRS
PSP plug and play GY6 engine harness will eliminate the need to fuzz around with wiring your engine swaps! Reduce the chances of errors and problems. Pre-labeled and ready to go!
Reference: TRS-CAREXH
Brand: TRS
TRS decided to make an affordable Full Carbon exhaust that performs well and looks great too. WILL NOT WORK ON B-CASE. Comes with 1.25 to 1.5 full stainledd over the fan header. Comes with all hardware and new exhaust gasket.
Reference: TRS-TCCVK
Brand: TRS
Throttle cable with a 75" sleeve, 45 degree angle mount. If you need a longer cable due to that extreme Honda Stretch this is it Can be used on both ruckus or gy6 carb
Reference: TRS-FFR/BK
Brand: TRS
The TRS foward Footrest is a great addition to your ruckus for that extra leg room. Great for riders who are taller or want another leg position. Attaches to side of frame. Powdered Black finish and includes stainless hardware (pegs not included). Hard anodized billet spacers are available for those running stock floorboards OR for bigger feet.
Reference: TRS-FBLS001/AL
Brand: TRS
Honda Ruckus Frame Brace for Lowboy Seat Frame aka DORF seat frame. Made from 6061 Solid Billet. Machined right here in the USA. Comes with instructions, fender washer and stainless hardware for use with or without a front frame cover.
Reference: TRS-FBLS001/BK
Brand: TRS
Honda Ruckus Frame Brace for Lowboy Seat Frame aka DORF seat frame. Made from 6061 Solid Billet. Machined right here in the USA. Comes with instructions, fender washer and stainless hardware for use with or without a front frame cover.
Reference: TRS-ESK/BK
Brand: TRS
TRS 9.5 Extension kit Version 3. POWDER COATED GLOSS BLACK not painted. FITS ALL NPS-50 2003 And Newer. Version 3 now mounts to cross brace, comes with beauty washers, and lighter deign. NO drilling out nuts required. Still has same 3piece locking design so everything is trued. No welding or cutting required. Shock Mount is shorter and has 2...
Reference: TRS-FBL30
Brand: TRS
Black stainless brake line with chrome straight fitting and 70 degree chrome banjo fitting on other end. Measures 29 inches in total. Perfect fit for those RRGS/Adelin front end kits. don't have excess line showing. really clean look.
Reference: TRS-FFCG/AL
Brand: TRS
Removing the OEM front frame plastics can really leave your Honda Ruckus looking bare. Well, TRS comes to the rescue with their Honda Ruckus Front Frame Cover. Cut out of 6061 billet Aluminum not just a cheap plate. These covers are attractive and fit with a perfect fit. It also helps clean up the front end by closing up one of the noticeable gaps in the...
Reference: TRS-FFCG/BK
Brand: TRS
Removing the OEM front frame plastics can really leave your Honda Ruckus looking bare. Well, TRS comes to the rescue with their Honda Ruckus Front Frame Cover. Cut out of 6061 billet Aluminum not just a cheap plate. These covers are attractive and fit with a perfect fit. It also helps clean up the front end by closing up one of the noticeable gaps in the...
Reference: TRS-FLCL6353000
Brand: TRS
Comes with Powercoated matte black brackets. NOT a 1 piece bracket. 2 piece bracket allows for better installation and bracket not warpping. Works on both GY6 and Honda Ruckus. Please see installation instructions for more informations!
Reference: TRS-FSC06/BK
Brand: TRS
TRS Honda Grom msx125 rear sprocket cover cnc in anodized black. You can run the kickstand wire inside the cover for that clean look by pushing the wire in the crease where red arrow is (Please see picture).
Reference: TRS-TR005/BK-F
Brand: TRS
Always trying to find a way to tie down your Ruckus? Mounting easily to the front fork assembly with supplied hardware in minutes giving you a sturdy place to attach tie-downs to your Ruckus. We have extended the hooks outwards for better clearence of parts and Fenders. Ideal for mounting in the bed of a truck, a lift or a trailer. CNC machined from solid...
Reference: TRS-MFPB/
Brand: TRS
Looking for a stylish way to mount your Mikuni DF-44 Rectangular fuel pump? This is IT. Available in Raw or Anodized
Reference: TRS-GTW470/
Brand: TRS
Tired of cracking your tank cover plastics. Get rid of those honda Clips and use our Tank Washer with bolt and Nylock Nuts. Each pack comes with 4 CNC aluminum T-6160 Bilet washers and 4 m6x25mm stainless socket cap bolts and nylock nuts. Your choice of Red, Black, or Raw. Everything Made in America and Hard Anodized in America.
Reference: TRS-HS/AL
Brand: TRS
What makes our stem different from all the others? Where is the steering tube? Say goodbye to home made hacks and shim kits to get your BMX style stem to fit, TRS Billet Aluminum Steering Stem is a direct swap for the stock handlebar. Each one of our stems is CNC machined. IT'S even improved with a releaf cut at the bottom so you can easily remove the...
Reference: TRS-HS/BK
Brand: TRS
What makes our stem different from all the others? Where is the steering tube? Say goodbye to home made hacks and shim kits to get your BMX style stem to fit, TRS Billet Aluminum Steering Stem is a direct swap for the stock handlebar. Each one of our stems is CNC machined. IT'S even improved with a releaf cut at the bottom so you can easily remove the...
Reference: TRS-HA001/AL
Brand: TRS
Billet adjustable handlebars with 31mm clip on bars included. These have been machined to fit the battery box not like others on the market. Body constructed out of solid! Billet 6061 aircraft grade aluminum. Main body is 1 piece for strength and safety see pictures. Comes with stainless hardware and u washer. Bolts onto the stock / oem triple tree stem...
Reference: TRS-HA001/BK
Brand: TRS
Billet adjustable handlebars with 31mm clip on bars included. These have been machined to fit the battery box not like others on the market. Body constructed out of solid! Billet 6061 aircraft grade aluminum. Main body is 1 piece for strength and safety see pictures. Comes with stainless hardware and u washer. Bolts onto the stock / oem triple tree stem...
Reference: TRS-HLK/AL
Brand: TRS
Finally a BOLT-ON solution to lowering your headlights! No more need to send in your headlight frame for welding, you can just buy this simple bracket kit, and lower them yourself! Give your Ruckus a much lower, meaner stance and appearance in the front!
Reference: TRS-HLK/BK
Brand: TRS
Finally a BOLT-ON solution to lowering your headlights! No more need to send in your headlight frame for welding, you can just buy this simple bracket kit, and lower them yourself! Give your Ruckus a much lower, meaner stance and appearance in the front!
Reference: TRS-HLK/RE
Brand: TRS
Finally a BOLT-ON solution to lowering your headlights! No more need to send in your headlight frame for welding, you can just buy this simple bracket kit, and lower them yourself! Give your Ruckus a much lower, meaner stance and appearance in the front!
Reference: TRS-HRC0512
Brand: TRS
Looking to re-wire or shortening the wire harness here's the kit. Super Hard to find. Comes in 1 bag all ready to go.
Reference: TRS-IR001/AL
Brand: TRS
Are you running a fatty, and have problems with the intake manifold hitting the frame? Or would you just like the forward-facing carb to sit more on-center in the bike to look better? Then you NEED this product. The CNC cut aluminum clocking flange IS 12.75MM THICK. Install it on your GY6 motor by removing the studs, bolting down the flange, then...
Reference: TRS-KIC/AL
Brand: TRS
Is your cheap plastic ignition cover broken or looking for something fancy but don't wanna spend an arm and leg. We have them in stock. CNC Machined out of 6061 Billet Aluminum, and comes in a raw finish so that you can easily finish it off how you like! Easily polished, painted, powder coated to match your bike!
Reference: TRS-KIC/BK
Brand: TRS
Is your cheap plastic ignition cover broken or looking for something fancy but don't wanna spend an arm and leg. We have them in stock. CNC Machined out of 6061 Billet Aluminum, and comes in a raw finish so that you can easily finish it off how you like! Easily polished, painted, powder coated to match your bike!
Reference: TRS-LIR001
Brand: TRS
Looking to add LED Blinkers or brake lights to your scooter? You will need either a set of in-line resistors for the circuit or replace the OEM flasher with our LED FLASHER relay. Comes with instructions. Tested on all LED lights. R6, TurtleHead, LED blinkers etc. You will need to use this LED FLASHER in place of the OEM one under the Battery box.
Reference: TRS-LDK01
Brand: TRS
This compact kickstand design is made for your lowered Honda ruckus. Simple from the outside yet in contains a spring loaded ball bearing locking mechanism on the inside. Powder Coated Gloss black and Made 100% in America with American Hardware.
Reference: TRS-LSL/AL
Brand: TRS
Looking for a seat frame to move you back and low? We got it ! Comes with all stainless hardware, anodized washers and Aluminium finish. Limited quantities available.
Reference: TRS-LSL/BK
Brand: TRS
Looking for a seat frame to move you back and low? We got it ! Comes with all stainless hardware, anodized washers and powdercoated gloss black finish. Limited quantities available.
Reference: TRS-LSL/WH
Brand: TRS
Looking for a seat frame to move you back and low? We got it ! Comes with all stainless hardware, anodized washers and powdercoated gloss white finish.