No products
High-quality replacement gudgeon pin circlips from Malossi for 10mm and...
The HAT weights are very durable and self lubricating. Available in a...
Pro Taper is well known for manufacturing high-quality grips and...
Budget weights by Motoforce, choice of weights. Available in a range of...
Replacement reed valve gasket for all Minarelli Horizontal engines.
The thermal grade of the spark-plug is of prime importance with tuning...
We can offer high-quality exhaust gaskets for all common original, sport...
Reference: TRS-KIC/AL
Brand: TRS
Is your cheap plastic ignition cover broken or looking for something fancy but don't wanna spend an arm and leg. We have them in stock. CNC Machined out of 6061 Billet Aluminum, and comes in a raw finish so that you can easily finish it off how you like! Easily polished, painted, powder coated to match your bike!
Reference: TRS-KIC/BK
Brand: TRS
Is your cheap plastic ignition cover broken or looking for something fancy but don't wanna spend an arm and leg. We have them in stock. CNC Machined out of 6061 Billet Aluminum, and comes in a raw finish so that you can easily finish it off how you like! Easily polished, painted, powder coated to match your bike!
Reference: TRS-LIR001
Brand: TRS
Looking to add LED Blinkers or brake lights to your scooter? You will need either a set of in-line resistors for the circuit or replace the OEM flasher with our LED FLASHER relay. Comes with instructions. Tested on all LED lights. R6, TurtleHead, LED blinkers etc. You will need to use this LED FLASHER in place of the OEM one under the Battery box.
Reference: TRS-LDK01
Brand: TRS
This compact kickstand design is made for your lowered Honda ruckus. Simple from the outside yet in contains a spring loaded ball bearing locking mechanism on the inside. Powder Coated Gloss black and Made 100% in America with American Hardware.
Reference: TRS-LSL/AL
Brand: TRS
Looking for a seat frame to move you back and low? We got it ! Comes with all stainless hardware, anodized washers and Aluminium finish. Limited quantities available.
Reference: TRS-LSL/BK
Brand: TRS
Looking for a seat frame to move you back and low? We got it ! Comes with all stainless hardware, anodized washers and powdercoated gloss black finish. Limited quantities available.
Reference: TRS-LSL/WH
Brand: TRS
Looking for a seat frame to move you back and low? We got it ! Comes with all stainless hardware, anodized washers and powdercoated gloss white finish.
Reference: TRS-MFB/SH
Brand: TRS
Looking to upgrade your stock frame bolts, we can offer here the correct thread and pitch for the honda Ruckus Frame. Grade 12.9 steel zinc plated for corrossion resistance. Include stainless steel washers.
Reference: TRS-SMF
Brand: TRS
The days of BMX Bear claw foot pedals, riding a bike with no helmet, and playing tackle football with no pads on Saturday morning are long gone. Everything these days has to be revised for us. Our new design has rounded ends to help prevent boo-boos and still knurled to help with foot grip. SUPER CLEAN LOOK These foot pegs are constructed from 6061-T6...
Reference: TRS-RR085/BK
Brand: TRS
Got Lowered Racebars but handlebars hit the tank? We got the solution. We have made riser in both 21mm (.85") and 38mm (1.5"). allows riders better sitting positions, Made right here at our shop from Billet 6061 and hard Anodized black. Comes with Stainless Hardware and fits between OEM risers and our Racebars. Taller riders over 6 feet tall we recommend...
Reference: TRS-RR15/BK
Brand: TRS
Got Lowered Racebars but handlebars hit the tank? We got the solution. We have made riser in both 21mm (.85") and 38mm (1.5"). allows riders better sitting positions, Made right here at our shop from Billet 6061 and hard Anodized black. Comes with Stainless Hardware and fits between OEM risers and our Racebars. Taller riders over 6 feet tall we recommend...
Reference: TRS-RRE001
Brand: TRS
Looking for a way to run some of the newer 2017 Honda Grom Exhausts with your TRS ‘RaceSets’ Rear Sets? Here is your solution! 3D Machined from 6061 Aluminum, this gives your 2017 Exhaust the mounting point it needs! Comes with Stainless Bolt for mounting Exhaust to the bracket… uses the existing hardware the RaceSets come with for mounting to the brake...
Reference: TRS-RAC005
Brand: TRS
Did you know your Ruckus radiator has a nice aluminum finish? Probably not since you can’t see it under the stock cover. Let your radiator shine through with one of our unique radiator covers. These are laser cut sweetness that your ride is calling for. It’s a simple swap out and the contrast really brings a great graphic element to an otherwise boring...
Reference: TRS-RCFI24/AL
Brand: TRS
Did you know your Ruckus radiator has a nice aluminum finish? Probably not since you can’t see it under the stock cover. Let your radiator shine through with one of our unique radiator covers. These are 6160 aluminum cut sweetness that your ride is calling for. It’s a simple swap out and the contrast really brings a great graphic element to an otherwise...
Reference: TRS-RCFI24/BK
Brand: TRS
Looking for something different? There is the TRS VIP Series 2 Toned. They anodize these first and then cut pattern for a truely unique look. Limited production! These are 6160 aluminum cut sweetness that your ride is calling for. It’s a simple swap out and the contrast really brings a great graphic element to an otherwise boring part of your bike. 1/4”...
Reference: TRS-RCVL32/AL
Brand: TRS
Did you know your Ruckus radiator has a nice aluminum finish? Probably not since you can’t see it under the stock cover. Let your radiator shine through with one of our unique radiator covers. These are 6160 aluminum cut sweetness that your ride is calling for. It’s a simple swap out and the contrast really brings a great graphic element to an otherwise...
Reference: TRS-RCVL32/BK
Brand: TRS
Looking for something different? There is the TRS VIP Series 2 Toned. They anodize these first and then cut pattern for a truely unique look. Limited production! These are 6160 aluminum cut sweetness that your ride is calling for. It’s a simple swap out and the contrast really brings a great graphic element to an otherwise boring part of your bike. 1/4”...
Reference: TRS-FBADK
Brand: TRS
This fender bracket allows for you to keep your oem Honda Ruckus rear fender when doing any of our TRS airbox delete kits. The bracket and hardware are included in this kit and will be a quick install. The nylock nut will go under the fender securing the fender to the bracket and then the other m6 bolt will secure the bracket to the open hole on your...
Reference: TRS-RSB5220/MI
Brand: TRS
The TRS rearset backs are a great addition to your ruckus for that sportbike feel. Attaches to side of frame using stock holes and provided stainless hardware. Raw Billet Aluminum 6061 1/2" plate SUPER THICK AND STRONG; Mounts to your stock engine mount location; Pegs NOT included, however any aftermarket pegs will work! Made in USA.
Reference: TRS-RSB5220/OP
Brand: TRS
The TRS rearset backs are a great addition to your ruckus for that sportbike feel. Attaches to side of frame using stock holes and provided stainless hardware. Raw Billet Aluminum 6061 1/2" plate SUPER THICK AND STRONG; Mounts to your stock engine mount location; Pegs NOT included, however any aftermarket pegs will work! Made in USA.
Reference: TRS-TR004/BK
Brand: TRS
Always trying to find a way to tie down your Ruckus? Mounting easily to the rear frame (Seat Area) with supplied hardware in minutes giving you a sturdy place to attach tie-downs to your Ruckus. Keep the rear from bouncing around. Ideal for mounting in the bed of a truck, a lift or a trailer. CNC machined from solid billet AL6061-T6 aluminum for maximum...
Reference: TRS-RPP041-1
Brand: TRS
If you have removed the Stock Airbox or purchased one of our Airbox eliminator kits you have to plug the REED Valve also called a PAIR or PAR valve. You can use a Cap or Plug like seen in the photo. Or you can use a Billet CNC Block off Plate. Why spend $$$$ on the big stuff and leave the little stuff out. Made from 6160 Billet Aluminum comes with...
Reference: TRS-RPP041-2
Brand: TRS
If you have removed the Stock Airbox or purchased one of our Airbox eliminator kits you have to plug the REED Valve also called a PAIR or PAR valve. You can use a Cap or Plug like seen in the photo. Or you can use a Billet CNC Block off Plate. Why spend $$$$ on the big stuff and leave the little stuff out. Made from 6160 Billet Aluminum comes with...
Reference: TRS-RCB072
Brand: TRS
Dorbyworks GY6 engine reinforcement stainless steel case brace. Raw high quality stainless steel, no rust!!! Can be high mirror polished or powder coated to match your bike for a custom engine look! Fit both ''A'' and ''B'' case GY6 Long Case.
Reference: TRS-RHB012/BK
Brand: TRS
TRS RUCKEYES works on bolt 2014-2015 models and 2018+ models. Finished off with Billet washers and Stainless steel hardware. Comes in Raw or Anodized black. Allows you to add our LED Turn signals and Bezels. (See Related Items NOT INCLUDED) Comes with USA made Headlight Harness no need to buy OEM one. All connections and terminals supplied. Simple...
Reference: TRS-RHB014/AL
Brand: TRS
TRS RUCKEYES works on bolt 2014-2015 models and 2017+ models. Finished off with Billet washers and Stainless steel hardware. Comes in Raw or Anodized black. Allows you to add our LED Turn signals and Bezels. (See Related Items NOT INCLUDED) Comes with USA made Headlight Harness no need to buy OEM one. All connections and terminals supplied. Simple...
Reference: TRS-RHB014/BK
Brand: TRS
TRS RUCKEYES works on bolt 2014-2015 models and 2017+ models. Finished off with Billet washers and Stainless steel hardware. Comes in Raw or Anodized black. Allows you to add our LED Turn signals and Bezels. (See Related Items NOT INCLUDED) Comes with USA made Headlight Harness no need to buy OEM one. All connections and terminals supplied. Simple...
Reference: TRS-SW009/
Brand: TRS
Reference: TRS-SSC31/AL
Brand: TRS
Hide that Ugly Starter with our TRS Stainless Steel GY6 Starter Motor Cover comes in a finish but can be easily polished or painted to match your scooter or Powdercoated High gloss Black ! Comes with stainless hardware and aluminum spacers.
Reference: TRS-SSC31/BK
Brand: TRS
Hide that Ugly Starter with our TRS Stainless Steel GY6 Starter Motor Cover comes in a finish but can be easily polished or painted to match your scooter or Powdercoated High gloss Black ! Comes with stainless hardware and aluminum spacers.
Reference: TRS-SSB88/AL
Brand: TRS
Stabilizes the seam where the main frame meets the rear frame. Made in the USA. Billet T6061 Comes in black or raw. T6061 Aluminum. Joint Rod Ends & nuts included
Reference: TRS-SSB88/BK
Brand: TRS
Stabilizes the seam where the main frame meets the rear frame. Made in the USA. Billet T6061 Comes in black or raw. T6061 Aluminum. Joint Rod Ends & nuts included
Reference: TRS-SG0173
Brand: TRS
TRS Logo wafer Sunglasses black UV400 protection. perfect for riding. everyone has asked for these because they are perfect riding glasses!
Reference: TRS-SEBS-AL
Brand: TRS
Looking for a way to extend your TRS Slip-in Stretch Kit even further?? Want a nice upgraded option to the bolt that is included in the kit? Check out the TRS Billet Stoppers! These Billet Machined Aluminum Stoppers have an indent on the back so that once installed, it’s possible to run with the bolt in the forward position or rear position without...
Reference: TRS-SEBS-BK
Brand: TRS
Looking for a way to extend your TRS Slip-in Stretch Kit even further?? Want a nice upgraded option to the bolt that is included in the kit? Check out the TRS Billet Stoppers! These Billet Machined Aluminum Stoppers have an indent on the back so that once installed, it’s possible to run with the bolt in the forward position or rear position without...
Reference: TRS-TLFM
Brand: TRS
Looking to run a flush taillight that is high and tight. Look no farther. The TRS FLUSH MOUNT LED uses a quality made in the USA LED Light one of the brightest in the industry. Led light offers run, brake and turn signals in a 6" bar. Offers great visibilty and has a clean 4 rivet install ultilizing the stock wire harness of your ruckus. Recommend using a...