No products
High-quality replacement gudgeon pin circlips from Malossi for 10mm and...
The HAT weights are very durable and self lubricating. Available in a...
Pro Taper is well known for manufacturing high-quality grips and...
Budget weights by Motoforce, choice of weights. Available in a range of...
Replacement reed valve gasket for all Minarelli Horizontal engines.
The thermal grade of the spark-plug is of prime importance with tuning...
In order to offer optimal handling, a dragrace handlebar should be...
Replacement Piston for the Stage 6 Streetrace 50cc 12mm Minarelli / Piaggio
Replacement Piston for the Stage 6 Streetrace 50cc 10mm minarelli
Universal speedometer for supermotos, scooters etc. featuring all...
Universal speedometer for supermotos, scooters etc. featuring all...
Universal speedometer for supermotos, scooters etc. featuring all...
The pulley is CNC machined from high quality aluminium and is suitable...
This intake funnel with grille combines the advantages of an open intake...
For Fit exclusively with Force...
Reference: BT11004
Brand: Scootertuning.ca
The starter clutch creates the link between the starter and the crankshaft. The clutch secures the components if the motor is turned on and the engine revs are more than the starter motor revs. Crunching and knocking when starting often point towards a problem with the clutch. Leaving it could cause major damage to the engine cases. Suitable for all 139...
Reference: BT29484
Brand: Scootertuning.ca
Starter motor bendix gear bush. Dimensions: Inside Diameter 8mm. Outside Diamter 12mm. Width 8mm
Reference: GY14955
Brand: Scootertuning.ca
Grinding and mechanical noises when starting the engine are often a sign that the starter clutch is faulty. The carrier sticks and no longer releases properly. In the worst case scenario, this can be catastrophic for the motor. As many parts of the starter mechanism are inter-connected, they are all subject to a fair bit of wear. Replacing the starter...
Reference: KW15440
Brand: Scootertuning.ca
Complete Starter clutch including starter gear and bearing ring. The replacement kit is suitable for all Minarelli-based Chinese-built 2-stroke engines like CPI, Keeway, Generic, Mawi, Longija etc. with 16mm crank tail shaft. Delivery is as shown. If the starter clutch is damaged, it always makes sense to replace all of the components. In a starter clutch...
Reference: NK901.14
Brand: Scootertuning.ca
Reinforced starter motor freewheel without starter sprocket, from Naraku. For original and tuned scooters with Minarelli-based, Chinese-built engines. [1E40QMB], such as CPI, Keeway, Generic etc. On high-performance scooters, this is usually the first component in the starter mechanism to fail. The starter mechanism is subjected to high forces. The...
Reference: NK901.13
Brand: Naraku
Reinforced starter motor freewheel without starter sprocket, from Naraku. The starter mechanism is subjected to higher loading where engines have higher compression. The starter motor freewheel has a metal securing ring (see image 2) and this prevents the winder drum from coming off the clutch. This ring should be removed before fitting the starter sprocket!
Reference: IP32579
Brand: Scootertuning.ca
18/65 Starter drive gear for 50cc Minarelli engines.
Reference: KW14187
Brand: Scootertuning.ca
The starter clutch carrier wheel transfers the power from the starter to the clutch. If the teeth on the e-starter or the clutch are damaged, they should be replaced to avoid further damage to other newer parts.
Reference: KW14189
Brand: Scootertuning.ca
Complete starter motor incl. cables, ready to install. Number of teeth: 9 Diameter Shaft: 9mm Distance of mounting holes: 65mm
Reference: 16783
Brand: Scootertuning.ca
Starter motor for upright and horizontal 50cc Minarelli scooters.
Reference: IP33167
Brand: Scootertuning.ca
Replacement starter motor Piaggio 50cc 4T AC scooters and various geared bikes with D50B0 engine.
Reference: GY14630
Brand: Scootertuning.ca
Starter relay or starter solenoid for 125/150cc GY6 4-stroke Chinese-built scooters. 2-pin connector.
Reference: 32963
Brand: Scootertuning.ca
Steering bearings should always be replaced when changing the steering stem or if there is any movement in the steering, or a light floating is felt in the steering when riding. Always grease before fitting.
Reference: 16771
Brand: Scootertuning.ca
When exchanging the fork or noticing too much play in the steering assembly, you should replace the steering bearings. This set includes all top and bottom bearings necessary. You should grease the bearings before assembling them.
Reference: KIT.A.139QMB.L
Brand: Naraku
The Eco Version of the Naraku transmission set includes: clutch, clutch bell and variator. All parts match one another. All restrictions are negated. Top speed and drivability on hills is improved. Kit contains variator, variator sleeves, weights, clutch and clutch bell. Suitable for all 4-strokes with 139QMB engine. Kit for scooters in untuned condition....
Reference: KIT.A.1E40QMB.788
Brand: Naraku
Complete transmission kit of Naraku components, all tuned to another. Since Chinese-built scooters are not kitted with top-end components out of the factory, this is the easiest way to overhaul the transmission without expert help. This negates any restrictors. Top speed and drivability on hills is improved, meaning higher top end and better acceleration!...
Reference: KIT.A.139QMB.669
Brand: Naraku
Complete transmission kit of Naraku components, all tuned to another. Since Chinese-built scooters are not kitted with top-end components out of the factory, this is the easiest way to overhaul the transmission without expert help. This negates any restrictors. Top speed and drivability on hills is improved, meaning higher top end and better acceleration!...
Reference: KIT.A.139QMB.729
Brand: Naraku
Complete transmission kit of Naraku components, all tuned to another. Since Chinese-built scooters are not kitted with top-end components out of the factory, this is the easiest way to overhaul the transmission without expert help. This negates any restrictors. Top speed and drivability on hills is improved, meaning higher top end and better acceleration!...
Reference: KIT.A.139QMB.788
Brand: Naraku
Complete transmission kit of Naraku components, all tuned to another. Since Chinese-built scooters are not kitted with top-end components out of the factory, this is the easiest way to overhaul the transmission without expert help. This negates any restrictors. Top speed and drivability on hills is improved, meaning higher top end and better acceleration!...
Reference: VC23457
Brand: Scootertuning.ca
Lens tail light with beautiful reflector. Comes with bulb and everything, just wire up and go.
Reference: VC20606
Brand: Scootertuning.ca
Replacement taillight for CPI Freaky, Aragon and Aragon GP scooters. Taillight matches the original item.
Reference: VC20197
Brand: Scootertuning.ca
Replacement taillight for Aprilia SR 50 from 2004 to 2013. Matches the dimensions of the original. Matches OEM-No.: 8224587
Reference: VC20196
Brand: Scootertuning.ca
LED replacement taillight with white glass and chrome housing for Aprilia SR50 scooters with rocket taillights. Matches the dimensions of the original. LED technology avoids annoying bulb changes. Set of 2 taillights supplied. Image 2 shows braking and standard views of the lights.
Reference: 32410
Brand: Scootertuning.ca
Complete throttle and oil pump cable for various Piaggio, Gilera and Derbi 50cc 2 stroke scooters. Length: 190cm
Reference: BT13984
Brand: Scootertuning.ca
Throttle cable with a 75" total length, 45 degree angle mount. Can be used on both ruckus or gy6 carb. Type II throttle cable is for the models, where the cable is screwed to the handlebar mount. If in doubt, compare the images with your own throttle cable. The length of the supplied component is approximately 190cm.
Reference: GY14206
Brand: Scootertuning.ca
Full Throttle for 125/150cc 4-stroke Chinese-built scooters. The throttle cable has a length of 212cm and fits almost every 125 and 150cc model. We recommend that you measure the original cable and check the detailed photos for accuracy.
Reference: NK200.07
Brand: Naraku
Universal quick-action throttle for all scooters, quads ATVs etc. with 22mm diameter handle bars. Generally the throttle cable does not need to be adapted in any way, meaning it’s easier to fit a tuned carb or swap to a twist grip on a quad. High quality set with great design. Ideal for changing over from thumb to twist grip throttles on quads.
Reference: NK900.53
Brand: Naraku
Naraku Torque Driver with 2 different linear guide slots. Most torque drivers have curved slots which is not ideal for performance gains but fine for ridability. The 2 different linear options mean you can give more emphasis to acceleration. This is more a feature for the race track but can give the everyday commuter improved drive with no loss of...
Reference: NK900.63
Brand: Naraku
Naraku Sports Contra Spring V.2 +1000rpm. The current version of the Naraku counter pressure spring uses a modified alloy spring providing better resilience and above average strength. Torque springs are available in packs of 2 or 3 or are available to purchase individually. Replacing the spring is necessary when tuning engines, the idea is to prevent the...
Reference: NK900.75
Brand: Naraku
Current Naraku counterpressure springs with different alloying of the spring steel. A necessary addition where engines have been tuned. RPM increases are given, to show the effect on the variator. A 1500 spring increases the variator ratio change point by 1500rpm.
Reference: NK900.64
Brand: Naraku
Naraku Sports Contra Spring V.2 +1500rpm. The current version of the Naraku counter pressure spring uses a modified alloy spring providing better resilience and above average strength. Torque springs are available in packs of 2 or 3 or are available to purchase individually. Replacing the spring is necessary when tuning engines, the idea is to prevent the...
Reference: NK900.76
Brand: Naraku
Naraku Sports Contra Spring V.2 +2000rpm. The current version of the Naraku counter pressure spring uses a modified alloy spring providing better resilience and above average strength. Torque springs are available in packs of 2 or 3 or are available to purchase individually.Replacing the spring is necessary when tuning engines, the idea is to prevent the...
Reference: NK900.65
Brand: Naraku
Naraku Sports Contra Spring V.2 +2000RPM. The current version of the Naraku counter pressure spring uses a modified alloy spring providing better resilience and above average strength. Torque springs are available in packs of 2 or 3 or are available to purchase individually. Replacing the spring is necessary when tuning engines, the idea is to prevent the...
Reference: NK900.51
Brand: Naraku
Naraku Sports Contra Spring V.2 Pack, +1000, +1500, +2000 rpmThe current version of the Naraku counter pressure spring uses a modified alloy spring providing better resilience and above average strength.Torque springs are available in packs of 2 or 3 or are available to purchase individually.Replacing the spring is necessary when tuning engines, the idea...
Reference: NK900.50
Brand: Naraku
Naraku Sports Contra Spring V.2 Pack, +1000, +1500, +2000 rpm. The current version of the Naraku counter pressure spring uses a modified alloy spring providing better resilience and above average strength. Torque springs are available in packs of 2 or 3 or are available to purchase individually. Replacing the spring is necessary when tuning engines, the...
Reference: GY16359
Brand: Scootertuning.ca
Gasket for the gearbox cover on GY6 125/150cc 4-stroke engines.