No products
High-quality replacement gudgeon pin circlips from Malossi for 10mm and...
The HAT weights are very durable and self lubricating. Available in a...
Pro Taper is well known for manufacturing high-quality grips and...
Budget weights by Motoforce, choice of weights. Available in a range of...
Replacement reed valve gasket for all Minarelli Horizontal engines.
The thermal grade of the spark-plug is of prime importance with tuning...
In order to offer optimal handling, a dragrace handlebar should be...
The thermal grade of the spark-plug is of prime importance with tuning...
The transmission bearings of a Minarelli crankcase are mounted in the...
This piston ring set for 88cc GY6 cylinders (52mm bore) is specially...
Replacement Malossi Piston for 88cc Malossi cylinder GY6 50cc
Complete cylinder gasket set for 52mm Malossi 4-stroke cylinder sets Kit...
Replacement silencer for Exhaust Stage6 R/T FL 100cc RC-ONE / P.R.E
It is a classic racing exhaust made of carefully hand-welded thin steel...
How best to exploit the Minarelli...
Reference: S6-4037ET04
Brand: Stage6
Extension cable for the sensor of the Stage6 exhaust gas temperature measuring device (EGT). The length of the extension cable is 120cm.
Reference: S6-0892
Brand: Stage6
Stage6 has adapted to the current situation and now introduce their Face / Community Masks Stage6 & Stage6 R/T polyester. For all health-conscious Stage6 fans. The 2021 season is just around the corner, and even though scooter races, drag race competitions and other events can probably take place again, strict health regulations will probably still apply....
Reference: S6-4516604
Brand: Stage6
This flywheel disc is available as an additional part for the Stage6 R/T internal rotor ignition. Using this part results in the engine revving up more slowly, but also yields a much smoother response, which is important especially in circuit racing. Depending on the set-up, it can also increase revs! Due to manufacturing tolerances, shimming may be...
Reference: S6-4514002
Brand: Stage6
This flywheel disc is available as an additional part for the Stage6 R/T internal rotor ignition. Using this part results in the engine revving up more slowly, but also yields a much smoother response, which is important especially in circuit racing. Depending on the set-up, it can also increase revs! Due to manufacturing tolerances, shimming may be...
Reference: S6-1450502/BK
Brand: Stage6
stage6 R/T proudly presents the MK2 version of their racing fork for Yamaha Aerox scooters. The Stage6 R/T Racing Fork MK 2 sets new standards in terms of performance, looks and customization options for Yamaha Aerox / MBK Nitro riders. Building on the success of the MK1 version, Stage6 improved performance and design to develop an even more powerful fork...
Reference: S6-1021013
Brand: Stage6
Organic Stage6 sport brake pads – perfect for daily use. The strongest point of these brake pads is their longevity. They are slightly softer than other brake pads, which makes for fuller feeling brakes, although they of course also allow for hard braking. Please remember that these brake pads have to be broken in and hard stops need to be avoided;...
Reference: S6-1021011
Brand: Stage6
Organic Stage6 sport brake pads – perfect for daily use. The strongest point of these brake pads is their longevity. They are slightly softer than other brake pads, which makes for fuller feeling brakes, although they of course also allow for hard braking. Please remember that these brake pads have to be broken in and hard stops need to be avoided;...
Reference: S6-1021010
Brand: Stage6
Organic Stage6 sport brake pads – perfect for daily use. The strongest point of these brake pads is their longevity. They are slightly softer than other brake pads, which makes for fuller feeling brakes, although they of course also allow for hard braking. Please remember that these brake pads have to be broken in and hard stops need to be avoided;...
Reference: S6-1025013/R
Brand: Stage6
The Stage6 RACING brake pads are the right choice for all of you who like it fast and furious and still don’t want to do without safety and hard braking. The semi-metal brake pads distinguish themselves due to an excellent braking performance and an immediate response, which allows for fast and hard braking. Homologated for road use.
Reference: S6-1025011/R
Brand: Stage6
The Stage6 RACING brake pads are the right choice for all of you who like it fast and furious and still don’t want to do without safety and hard braking. The semi-metal brake pads distinguish themselves due to an excellent braking performance and an immediate response, which allows for fast and hard braking. Homologated for road use.
Reference: S6-1025010/R
Brand: Stage6
The Stage6 RACING brake pads are the right choice for all of you who like it fast and furious and still don’t want to do without safety and hard braking. The semi-metal brake pads distinguish themselves due to an excellent braking performance and an immediate response, which allows for fast and hard braking. Homologated for road use.
Reference: S6-5119500
Brand: Stage6
Drive face with optimized drive face angle. In order to keep costs down, original racing drives are usually cast or - even worse - pressed steel. When these parts are cooling down after casting, the metal is still molten and the drive face angles can often vary. Due to the fact that racing engines have a very narrow power band, these tolerances have...
Reference: S6-5114000
Brand: Stage6
Drive face with optimized drive face angle. In order to keep costs down, original racing drives are usually cast or - even worse - pressed steel. When these parts are cooling down after casting, the metal is still molten and the drive face angles can often vary. Due to the fact that racing engines have a very narrow power band, these tolerances have...
Reference: S6-5116600
Brand: Stage6
Drive face with optimized drive face angle. In order to keep costs down, original racing drives are usually cast or - even worse - pressed steel. When these parts are cooling down after casting, the metal is still molten and the drive face angles can often vary. Due to the fact that racing engines have a very narrow power band, these tolerances have...
Reference: S6-5614027
Brand: Stage6
The R/T front pulley has been developed specifically for the R/T Oversize CVT kit, forming a drive train with better performance and better power transmission. The pulley's angle has been adjusted to the R/T variator, but the pulley can also be used with the SportPro variator. Also included in the delivery is the Stage6 R/T fan.
Reference: S6-4036/BK
Brand: Stage6
The Stage6 MKII Mini Fuel Gauge received a visual overhaul. A fuel gauge is a pretty important, if not indispensable, little device for every bike owner. The popular Stage6 mini instrument is suitable for every vehicle type and model. A clean and easy to read display shows how much fuel you have left in your tank. The gauge can be adjusted to...
Reference: S6-0125
Brand: Stage6
Fuel hose with a length of 50cm, interior diameter 6mm
Reference: S6-75166ET20
Brand: Stage6
Base gasket set (aluminium) Stage6 R/T 70 / BIG BORE 95, Minarelli horizontal LC (ALU: 0.15mm; 0.32m ; 0.20mm / Copper: 0.12mm)
Reference: S6-71171ET03
Brand: Stage6
Replacement Gasket set for Stage 6 Sport cylinder
Reference: S6-7516620ET01
Brand: Stage6
Replacement gasket set for the Stage6 R/T FL 100cc cylinder
Reference: S6-74166ET01
Brand: Stage6
This is the complete gasket set for 50/70cc Stage6 MKII cylinder kit. Check the picture to see which gaskets are included.
Reference: S6-75ET22
Brand: Stage6
This is the complete gasket set for Stage6 R/T cylinder kit. Check the picture to see which gaskets are included.
Reference: S6-74166ET09
Brand: Stage6
Stage6 Cylinder Gasket Set MK2 Aluminium 50cc / Racing 70cc / Sport Pro 70cc Minarelli horizontal LC (Yamaha Aerox) to replace old or leaking gaskets. Gaskets should be replaced if worn or leaking, or whenever removed during servicing. After each disassembly of your cylinder, either for periodical maintenance, simple check ups or after installing /...
Reference: S6-74166ET08
Brand: Stage6
Replacement gasket set for the Stage6 Sport/Racing MKII cylinder kit with 5 base gasket in order to adjust the squish of the cylinder.
Reference: S6-74140ET02
Brand: Stage6
This is the complete gasket set for Stage6 pro and racing MKII cylinders. Check the picture to see which gaskets are included.
Reference: S6-74166ET02
Brand: Stage6
This is the complete gasket set for Stage6 pro/racing 70cc MKII cylinders. Check the picture to see which gaskets are included.
Reference: S6-72166ET08
Brand: Stage6
This is the complete gasket set for 70cc Stage6 Streetrace cylinder kit. Check the picture to see which gaskets are included.
Reference: S6-72166ET09
Brand: Stage6
This is the complete gasket set for Stage6 Streetrace cylinders. Check the picture to see which gaskets are included.
Reference: S6-2216601
Brand: Stage6
The gearbox cover is CNC-machined from high-quality aluminum alloy. High-quality SKF bearings ensure maximum performance and durability. When developing this tuning cover, particular attention was paid to the rigidity and solidity of the gearbox cover. The focus was not on a lightweight gearbox cover, but a stiff and robust cover that offers excellent...
Reference: S6-2216602
Brand: Stage6
The gearbox cover is CNC-machined from high-quality aluminum alloy. High-quality SKF bearings ensure maximum performance and durability. When developing this tuning cover, particular attention was paid to the rigidity and solidity of the gearbox cover. The focus was not on a lightweight gearbox cover, but a stiff and robust cover that offers excellent...
Reference: S6-0360
Brand: Stage6
High-quality foam donuts from Stage6 for Enduro / crossbike handlebar grips. These coated donuts will simply be placed on the grips to help prevent thumb blisters. Sold as pair.
Reference: S6-56166ET006
Brand: Stage6
The Stage6 torque drive is a stand-out piece of equipment, offering plenty of options for adjustment. 2 different slots (37? and 40? gradient) for adjusting pulley opening angle and speed which will influence the performance of the transmission.
Reference: S6-56166ET008
Brand: Stage6
The Stage6 torque drive is a stand-out piece of equipment, offering plenty of options for adjustment. 2 different slots (39? and 42? gradient) for adjusting pulley opening angle and speed which will influence the performance of the transmission.
Reference: S6-195020
Brand: Stage6
Stage6 handlebar grips in Stickerbomb look, for a bit of urban style customizing. The new grips combine various Stage6 and Stage6 R/T logos in a wild graffiti design, which is permanently protected by a high-quality transparent coating. The grips are comfortable to hold and have a non-slip coating. The inner flange is reinforced to provide optimum support...
Reference: S6-195010
Brand: Stage6
These are high-quality dual compound grips. Most versions are two-tone plus an all-black version for those who like it classic and simple. STAGE6 put a lot of effort into the design of their grips. The result are these unique looking grip sleeves that stand out from all other grips on the market and will make your scooter or moped a real eye-catcher. The...