No products
High-quality replacement gudgeon pin circlips from Malossi for 10mm and...
The HAT weights are very durable and self lubricating. Available in a...
Pro Taper is well known for manufacturing high-quality grips and...
Budget weights by Motoforce, choice of weights. Available in a range of...
Replacement reed valve gasket for all Minarelli Horizontal engines.
The thermal grade of the spark-plug is of prime importance with tuning...
We can offer high-quality exhaust gaskets for all common original, sport...
The Polini FOR RACE crankshafts are developed to increase the...
The Polini FOR RACE crankshafts are developed to increase the...
Reference: S6-802050
Brand: Stage6
High quality silver small end bearing from Stage6 for many common engines. The best bearings available on the market! The original item should be replaced when using a new crankshaft or tuning cylinder. In addition to the common sizes, we also offer an extra-wide 10mm bearing. With some cylinder kits, the bearing has too much play and may wear unevenly....
Reference: S6-802057
Brand: Stage6
High quality silver small end bearing from Stage6 for many common engines. The best bearings available on the market! The original item should be replaced when using a new crankshaft or tuning cylinder. In addition to the common sizes, we also offer an extra-wide 10mm bearing. With some cylinder kits, the bearing has too much play and may wear unevenly....
Reference: S6-802055
Brand: Stage6
Small end bearing Stage6 HighQuality, silver, 12/ 10mm (10x 17x 13mm) Minarelli reduction bearing for 12mm crankshafts to 10mm gudgeon pins. High quality silver small end bearing from Stage6. The best bearings available on the market! The original item should be replaced when using a new crankshaft or tuning cylinder. Attention: Cannot be used with...
Reference: S6-79166ET01
Brand: Stage6
Finally we can offer you the cylinder spacer kit that goes with the 85mm Stage6 R/T crankshaft. This makes it possible to use your standard cylinders in conjunction with this crankshaft. For further information about the 85mm conrod crankshaft, check out the crankshaft in the shop.
Reference: S6-79140ET01
Brand: Stage6
Finally we can offer you the cylinder spacer kit that goes with the 85mm Stage6 R/T crankshaft. This makes it possible to use your standard cylinders in conjunction with this crankshaft. For further information about the 85mm conrod crankshaft, check out the crankshaft in the shop.
Reference: S6-0250
Brand: Stage6
Even slight blows can damage the ceramic surface or the electrode of a spark plug, but safely stored in this orange Stage6 box, your plug will be well protected from harm and can be taken to events etc. Especially recommendable for expensive racing plugs.
Reference: S6-4080/OR
Brand: Stage6
Multifunctional, universal digital Stage6 speedometer with illuminated display, available with white or orange casing. The speedo has a size of 100 x 60 x 20mm and requires a 12V supply and a battery. Revs are picked up inductively while the speed is picked up via a magnet sensor installed at the wheel. As an alternative, a speedo adapter for Yamaha/MBK...
Reference: S6-4080/WH
Brand: Stage6
Multifunctional, universal digital Stage6 speedometer with illuminated display, available with white or orange casing. The speedo has a size of 100 x 60 x 20mm and requires a 12V supply and a battery. Revs are picked up inductively while the speed is picked up via a magnet sensor installed at the wheel. As an alternative, a speedo adapter for Yamaha/MBK...
Reference: S6-0221
Brand: Stage6
The fully synthetic oil with modern high-performance additives was developed for extreme conditions such as racing and accordingly offers high lubrication properties to reduce friction and consequently improve output and performance. It is a high performance lubricant with shear stable, antioxidant, anti-corrosion and anti-wear and anti-foaming...
Reference: S6-56166ET022
Brand: Stage6
This little castle washer sits at the end of the crankshaft and connects to the kickstart pinion gear. it is an essential part of the transmission, so in case it is damaged or missing, please replace immediately.
Reference: S6-2019502P
Brand: Stage6
Taller gears in the transmission reduce the overall reduction factor of the gearbox. If the engine is powerful enough to pull the taller gears, this modification will also raise top speed. The original gears in some models are quite short; this is where you can gain some km/h more even with original cylinders. Different from common gear units, the ones...
Reference: S6-2019501P
Brand: Stage6
Taller gears in the transmission reduce the overall reduction factor of the gearbox. If the engine is powerful enough to pull the taller gears, this modification will also raise top speed. The original gears in some models are quite short; this is where you can gain some km/h more even with original cylinders. Different from common gear units, the ones...
Reference: S6-140065
Brand: Stage6
We now offer an update on the caliper adapter for the 4-piston caliper from Stage6 R/T for Yamaha Aerox and Gilera Runner. The actual bracket remains the same, the length of the spacer sleeves has been slightly changed to be able to install more common brake disc sizes. The adapter can be used on various models and is designed for the original fork...
Reference: S6-0503
Brand: Stage6
New Stage6 maxi sticker sheets in Din A2 and A4. Now with Stage6 R/T logo. You can choose between two versions: white for dark surfaces or black for light surfaces; for the smaller set, there is only one colour version.
Reference: S6-0504
Brand: Stage6
Reference: L-SASTAGE6/BK
Brand: Stage6
This is the most famous Stage6, the one you definitely can’t do without! Available in black or white writing.
Reference: S6-0530/S
Brand: Stage6
Rare Stage6 R/T Breed of Speed sticker that was previously only available on trade fairs and other events. Transparent foil with white or black print.
Reference: S6-0530/W
Brand: Stage6
Rare Stage6 R/T Breed of Speed sticker that was previously only available on trade fairs and other events. Transparent foil with white or black print.
Reference: S6-0535/HL
Brand: Stage6
For Stage6 fans: Sticker with great-looking hologram effect. Pimp your ride (or cell phone case or whatever comes your way) with cool stickers from your favorite brand.
Reference: S6-0537/HL
Brand: Stage6
For Stage6 fans: Sticker with great-looking hologram effect. Pimp your ride (or cell phone case or whatever comes your way) with cool stickers from your favorite brand.
Reference: L-SASTAGE6/WH
Brand: Stage6
This is the most famous Stage6, the one you definitely can’t do without! Available in black or white writing.
Reference: S6-9916605
Brand: Stage6
The Stage6 subframe offers you the opportunity to fit your MBK Nitro/ Yamaha Aerox with a carburettor directly above the rear wheel where conventional subframe bars get in the way. Equipped with rubber supports, the subframe can be mounted flexibly - for everyday use - or suspension movement can be suppressed - for races. The advantages are plain to see:...
Reference: S6-SSP119/
Brand: Stage6
Switch unit from Stage6 that will dwarf all plastic handlebar controls available so far on the market. This switch unit is an excellently finished state-of-the-art product CNC milled from aluminium. And the equipment leaves nothing to be desired either. The unit offers opportunities to connect indicators, light switch as well as horn or starter and is...
Reference: SHIRTS6/
Brand: Stage6
Regular fit – shirts are a bit too small. Please order 1 size larger. We’ve had these stylish shirts with Stage6, Stage6 R/T and Scootertuning is not a Crime (STINAC) logos made just for you. These are high-quality shirts with premium screen prints on the front. Regular fit – shirts are a bit too small. Please order 1 size larger.
Reference: SHIRTS6RT/
Brand: Stage6
Regular fit – shirts are a bit too small. Please order 1 size larger. We’ve had these stylish shirts with Stage6, Stage6 R/T and Scootertuning is not a Crime (STINAC) logos made just for you. These are high-quality shirts with premium screen prints on the front. Regular fit – shirts are a bit too small. Please order 1 size larger.
Reference: S6-4031
Brand: Stage6
Stage6 is rolling out a revised and improved version of their popular mini tachometer / rev counter. The MKII is the ultimate must-have for setting up engine and variator. This compact and easy-to-read digital tachometer with blue illuminated display gives extremely precise engine speed info within a tolerance range of only 10rpm and will be the perfect...
Reference: S6-4030ET01
Brand: Stage6
In order to use the temperature function of Koso Pro and Stage6 temperature gauge and rev counter also for Piaggio and Peugeot engines, you will need this temperature sensor, since the gauge comes with a temperature sensor for Minarelli engines as standard. Of course, the Minarelli version is also sold individually.
Reference: KO-BF030000
Brand: Stage6
In order to use the temperature function of Koso Pro and Stage6 temperature gauge and rev counter also for Piaggio and Peugeot engines, you will need this temperature sensor, since the gauge comes with a temperature sensor for Minarelli engines as standard. Of course, the Minarelli version is also sold individually.
Reference: S6-4030ET02
Brand: Stage6
In order to use the temperature function of Koso Pro and Stage6 temperature gauge and rev counter also for Piaggio and Peugeot engines, you will need this temperature sensor, since the gauge comes with a temperature sensor for Minarelli engines as standard. Of course, the Minarelli version is also sold individually.
Reference: KO-BF100000
Brand: Stage6
In order to use the temperature function of Koso Pro and Stage6 temperature gauge and rev counter also for Piaggio and Peugeot engines, you will need this temperature sensor, since the gauge comes with a temperature sensor for Minarelli engines as standard. Of course, the Minarelli version is also sold individually.
Reference: S6-4034
Brand: Stage6
The Stage6 mini temperature gauge MKII is a must-have for every serious tuning fan. It underwent a visual overhaul and will be a perfect fit for any scooter dashboard. It features 2 independent temperature displays. The integrated overheat alarm is automatically triggered at temperatures over 120° and indicated by a blinking display. The temperature...
Reference: S6-SSP110ET01
Brand: Stage6
Replacement throttle cable for Stage6 CNC throttle grip.
Reference: S6-SSP115/
Brand: Stage6
Quick action throttle from Stage6 that will dwarf all grips on the market. Throttlegrip and switch unit are excellently finished state-of-the-art products CNC milled from aluminium. And the equipment leaves nothing to be desired either. The throttle has a universally programmable switch (e.g. for killswitch, NOS, starter). Several lock-in positions inside...
Reference: S6-151300/
Brand: Stage6
Not only are the Stage6 tyre valves real gems with their CNC-machined construction and the anodised finish
Reference: S6-151200/
Brand: Stage6
Not only are the Stage6 tyre valves real gems with their CNC-machined construction and the anodised finish - they are also very handy thanks to their short length, which makes them ideal for small wheels where there is not much room, e.g. Piaggio Zip. Two rubber seals that are flush to the rim make for perfect sealing. Available in chrome, black and orange.
Reference: S6-5216603
Brand: Stage6
These black-coated torque springs from Stage6 are available in different strengths. Due to tuning, the drive belt may start to slip, which will make a stronger torque spring necessary. You will usually notice that the engine revs up but you can't feel any acceleration. The strength of a torque spring is marked on the spring itself so you won't have any...