No products
High-quality replacement gudgeon pin circlips from Malossi for 10mm and...
The HAT weights are very durable and self lubricating. Available in a...
Pro Taper is well known for manufacturing high-quality grips and...
Budget weights by Motoforce, choice of weights. Available in a range of...
Replacement reed valve gasket for all Minarelli Horizontal engines.
The thermal grade of the spark-plug is of prime importance with tuning...
We can offer high-quality exhaust gaskets for all common original, sport...
The Polini FOR RACE crankshafts are developed to increase the...
The Polini FOR RACE crankshafts are developed to increase the...
Reference: TH10BGY6125-2000
Brand: Scootertuning.ca
Torque springs are important for the transmission set-up. The spring transfers pressure onto the torque driver and so strongly influences the vario's "shifting" characteristics. You'll know that it's necessary to go for a stronger spring when the drive belt keeps slipping, the vario doesn't shift smoothly within the ideal rpm range or the engine keeps...
Reference: 5512077
Brand: Malossi
Replacement CDI For the Malossi I-tech cylinder kit for Aprilia SR50 with piaggio engine.
Reference: VC23268
Brand: Scootertuning.ca
Replacement H8 halogen 12V 55W headlight bulb with PGJ19-1 base. Please compare item specifics with your current bulb for compatibility.
Reference: SCT-OSI044
Brand: Scootertuning.ca
Special Aluminium tool to install variator side oil seal to the correct dept for minarelli engine.
Reference: MF99.00502
Brand: Scootertuning.ca
This is a special torx key (with hole) for easy removal of security torx screws with pin (I-Torx), as they are used e.g. for inlet manifolds on Piaggio or for Peugeot engine covers.
Reference: MF99.00095
Brand: Motoforce
Rubber mallet from Motoforce for all common work on your scoot. Especially useful when removing the crankshaft or engine. Head completely made of hard rubber with wooden handle. Diameter of contact surface: 55mm
Reference: RH-165
Brand: Ruckhouse
Custom 6061 heat treated aircraft grade aluminium wheel set for Honda Grom and Yamaha Bws / Zuma 50 2T. Several design available! Specifications : Front wheel 12x4'' with 4/90 bolt pattern and 2+2 offset, Rear wheel 12x6'' with 4/110 bolt pattern and 4+2 offset. 4X90 front hub with 4/110 rear hub required. Attention! For Bws / Zuma 50 the Engine need to...
Reference: SCT-1261278
Brand: Ruckhouse
Custom 6061 heat treated aircraft grade aluminium rear wheel for Honda Grom & Yamaha Bws / Zuma 50 2T. Several design available! Specifications : 12x6'' with 4/110 bolt pattern and 4+2 offset. 4/110 rear hub required. Attention! For Bws / Zuma 50 the Engine need to be moved 1'' to the left in order to keep the rear wheel centered.
Reference: TRT-2005
Brand: 2Fast
The italian brand 2Fast in partnership with Jollymoto has developed a range of exhaust racing to match perfectly with the rolls of the brand. They are made by hand, the muffler is aluminum color. Very torquey and powerful Exhaust System. Available in 70, 98cc Piaggio.
Reference: 4VP-13178-00-00
Brand: Yamaha
Yamaha OEM replacement part. Oil pump gear.
Reference: DFT001766CAR
Brand: Tun'R
Reference: DFT002173CAR
Brand: Tun'R
Reference: 1516211
Brand: Malossi
Reference: SC3834/BK
Brand: SCR Corse
Reference: RPR-HGCA
Brand: rPRO
Reference: P12200
Brand: Replay
Reference: S6-45ET017
Brand: Stage6
Programming software and hardware for Stage6 R/T internal rotor ignition. The Stage6 R/T ignition comes with a CDI with 2 pre-programmed ignition curves. If you want to go a step further, you can use this software to reprogram the CDI to match your individual setup and preferences.The kit includes the necessary hardware interface and the software in...
Reference: 482764
Brand: Doppler
Spare springs for Doppler clutch SX86
Reference: VCR-RD13PWK
Brand: Keihin
The one and only original KEIHIN PWK 28mm carburetor, now available!
Reference: 343.0400
Brand: Polini
Replacement parts for Polini CP carbs only.
Reference: 0609181
Brand: Tecnigas
The Tecnigas Next-R is a well-proven and all-round exhaust for 50cc or 70cc sport cylinders. This exhaust has a good performance yield at relatively low range and sound levels. In terms of performance, the Next-R system is an improvement over the Leovince TT and, with the correct tuning, can reach over 9hp
Reference: YAS035SR
Brand: Yasuni
Replacement Silencer for Yasuni exhaust!
Reference: YAS047SR
Brand: Yasuni
Replacement Silencer for Yasuni exhaust!
Reference: VCR-RD45166/RE
Brand: Voca
Voca offers here the aprovred Sabotage exhaust for minarelli horizontal engine with original cylinder kit 50 or 70cc. An exhaust with torque and power very similar to the best of the market such Bidalot S3 and Yasuni R. .. The muffler is red anodised. We recommend a carburetor from 17.5 to 21mm sport variator like malossi multivar or polini hi-speed.
Reference: VCR-RD45166/CA
Brand: Voca
Voca offers here the aprovred Sabotage exhaust for minarelli horizontal engine with original cylinder kit 50 or 70cc. An exhaust with torque and power very similar to the best of the market such Bidalot S3 and Yasuni R. .. The muffler is made of carbon. We recommend a carburetor from 17.5 to 21mm sport variator like malossi multivar or polini hi-speed.
Reference: RH-C074
Brand: Ruckhouse
Honda Grom Carbon Gas Tank Cover. Plain weave glossy finish Carbon.
Reference: 1CD-H3559-00-P5
Brand: Yamaha
Replacement OEM Yamaha parts.
Reference: 1CD-H3559-00-P3
Brand: Yamaha
Replacement OEM Yamaha parts.
Reference: 1CD-H3559-00-P0
Brand: Yamaha
Replacement OEM Yamaha parts.
Reference: 1CD-E4410-00-00
Brand: Yamaha
Replacement OEM Yamaha parts.
Reference: TRS-RHB014/BK
Brand: TRS
TRS RUCKEYES works on bolt 2014-2015 models and 2017+ models. Finished off with Billet washers and Stainless steel hardware. Comes in Raw or Anodized black. Allows you to add our LED Turn signals and Bezels. (See Related Items NOT INCLUDED) Comes with USA made Headlight Harness no need to buy OEM one. All connections and terminals supplied. Simple...
Reference: VCR-SD420/RE
Brand: Voca
Chain VOCA Reenforced 420-136
Reference: 41-720
Brand: RK Chain
Clip or Rivet type connecting link for the RK 420 MXZ Chain.
Reference: CH-1169
Brand: Chimera
Chimera Spacer set for Front Honda Grom Wheel with Feign / NCY Forks Set Up.
Reference: RH-140
Brand: Ruckhouse
Want to clean up the look of your factory levers? This is the perfect mod to make your grom look great. These are direct bolt in levers for your master cylinder and clutch lever on your honda grom. These billet levers have adjustable settings on them for your comfort along with a nice dark black anodized finish!
Reference: RH-177
Brand: Ruckhouse
Looking to lower the rear of your Honda GROM a bit to go with the lower front end? Want to lower it without NEEDING* to install a stretch? Here you go! Kit requires no drilling, and can be installed easily with the bike properly supported (because you have to remove the rear shock). You do not need to remove the chain/wheel/etc to install! The Ruckhouse...