No products
High-quality replacement gudgeon pin circlips from Malossi for 10mm and...
The HAT weights are very durable and self lubricating. Available in a...
Pro Taper is well known for manufacturing high-quality grips and...
Budget weights by Motoforce, choice of weights. Available in a range of...
Replacement reed valve gasket for all Minarelli Horizontal engines.
The thermal grade of the spark-plug is of prime importance with tuning...
We can offer high-quality exhaust gaskets for all common original, sport...
The Polini FOR RACE crankshafts are developed to increase the...
The Polini FOR RACE crankshafts are developed to increase the...
The original TBR System, Adding this...
Reference: BT24028
Brand: Scootertuning.ca
This brake system consists of a hand brake cylinder (hand brake pump) with lever, hose, calliper with pads and brake light switch. The brake system is suitable for all scooters with 10” wheels. It can be that the brake light switch connector must be slightly adapted if a different connector is fitted. No mirror fitment. Brake hose length: 95cm. All-in-all...
Reference: BT16026
Brand: Scootertuning.ca
Standard Naraku carburettor floats for GY6 50cc 139 QMB/QMA.
Reference: NK100.82
Brand: Naraku
This piston ring set for 50cc GY6 cylinders (39mm bore) can be optionally used in Naraku 4-stroke cylinders, but is also suitable for original cylinders and standard cast iron cylinder sets from other manufacturers.
Reference: GY6-agas65.5-54-1.5
Brand: Taida
This cylinder spacer kit make it possible to use 150-232cc cylinder with stroker crankshaft and to adjust the correct piston height in the cylinder head.
Reference: TH12AGY6125-6108-FORGED
Brand: Scootertuning.ca
170cc Forged piston cylinder kit for all 125/150cc 4 stroke Chinese scooters which use the GY6 157QMI or 152QMI engines. Kit is supplied with required top end gaskets, barrel, piston, rings, pin and clips.
Reference: TH12AGY6125-6308
Brand: Scootertuning.ca
180cc Cylinder kit for all 125/150cc 4 stroke Chinese scooters which use the GY6 157QMI or 152QMI engines. Kit is supplied with required top end gaskets, barrel, piston, rings, pin and clips.
Reference: TH12AGY6125-58508
Brand: Scootertuning.ca
160cc Cylinder kit for all 125/150cc 4 stroke Chinese scooters which use the GY6 157QMI or 152QMI engines. Kit is supplied with required top end gaskets, barrel, piston, rings, pin and clips.
Reference: GY6-T-ONE
Brand: Taida
Taida Racing Camshaft (6.6/6.4) for sports and racing cylinders. This camshaft will offer great improve at high RPM. Suitable for 125/150cc scooters, quads etc. with GY6 engines. This is the T-100 medium version. The T-300 and T-One High rev version are also available. Lift : IN 19.4/26 – EX 19.4/25.8
Reference: GY6-01054-63cfh
Brand: Taida
High Quality 180cc Taida Cylinder with Forged piston which offer better durability and reduced friction. The high compression piston will offer better power and the ceramic cylinder with more heat dissipation will help to avoid overheating. The bore is 63mm. Kit is suitable for all air-cooled 4 stroke 125-150cc Kymco engines (scooters), and most Chinese...
Reference: GY6-01054-63F
Brand: Taida
High Quality 180cc Taida Cylinder kit with Forged piston which offer better durability and reduced friction. The bore is 63mm. Kit is suitable for all air-cooled 4 stroke 125-150cc Kymco engines (scooters), and most Chinese imported vehicles 125/150cc (scooters, quads and buggies). Attention! Boring Required.
Reference: GY6-01054-58.5h
Brand: Taida
High Quality 160cc Taida Cylinder kit with high compression piston for GY6 125/150cc + engines. The high compression piston will offer better power but more heating. The bore is 58.5mm. Kit is suitable for all air-cooled 4 stroke 125-150cc Kymco engines (scooters), and most Chinese imported vehicles 125/150cc (scooters, quads and buggies). No Boring...
Reference: 3217327
Brand: Malossi
These Malossi exhausts have been specially developed for the 70cc Testa Rossa cylinders. Expansion chamber in clear finish with beautifully milled and blue anodised rear silencer made of aluminium; definitely characteristic of the Malossi MHR series.
Reference: BM01860-03
Brand: Scootertuning.ca
Reference: 005-4160405-S1
Brand: Two Brothers Racing
The S1R exhaust is a state-of-the-art product from Two Brothers Racing. The system features carbon fiber highlighted by a natural finished Aluminum outlet and stamped spring-mounted inlet for ultimate durability. The S1R cat-eliminating exhaust from Two Brothers Racing showcases a race design while increasing all-around performance. All of our carbon...
Reference: SCT-128FK
Brand: Douglas
Ruckhouse Custom 6061 heat treated aircraft grade aluminium wheel set.
Reference: 0313639
Brand: Malossi
Red Chilli Oil Filter is the safeguard for your engine! Developed by Malossi to purify the oil that protects the engines and heads of the Malossi Trophy Races, in which they become stressed beyond every limit. In street application, the Red Chilli Oil Filter s easily satisfy even the most extreme requirements from the most demanding customers. Greater...
Reference: 6215033BS
Brand: Malossi
They were born on the racetrack, but they are perfectly suitable for the chaotic driving conditions imposed by our city traffic. Malossi Brake Pads have been designed with new ecological materials (a high percentage of carbon fibre and other metal fibres make up the pad s mixture). The most evident qualities of these brake pads due to their high friction...
Reference: 2913137
Brand: Malossi
Made for MALOSSI FLY and DELTA clutches. Pre-hardened carbon steel springs, with high yield strength, that are protected by a high heat-resistant paint in various colours. The different colouring shows the stiffness of each spring series.
Reference: Taida-PE28
Brand: Taida
Reference: NK200.02
Brand: Naraku
Naraku 30mm racing carb for 125-300cc engines. Racing only! Connection width 37mm, filter side 50mm. Throttle cable layout on the side. Build height corresponds with the original. Please check that this carb is suitable before ordering. Different air filter required, different inlet manifold, or adapted original. MAIN JET=138 Pilot Jet=60
Reference: RH-167
Brand: Ruckhouse
Reference: 61-64132
Brand: SBS
OE replacement compound for bikes with non-sintered pads. Designed for commuters, general-purpose street and cruiser bikes. Ceramic compound offers long pad life, low dust and low brake disc/rotor wear. Excellent, consistent performance in wet and dry conditions. NUCAP NRS technology secures a mechanical and indestructible bonding of the compound....
Reference: 174.0014
Brand: Polini
Polini brake pads are & top braking performance for high-quality processing. When used on the track and on the road, the reliable & durable braking positive impact. The organic coating composition can be dosed easily and protects the brake disc. This Polini brake lining has a KBA released and may be legally used on public roads as high-quality...
Reference: MF15.19030
Brand: Motoforce
This two-piece intake manifold from Motoforce uses a construction that is both simple and brilliant and offers a great alternative for the usually very expensive straight intake manifolds from renowned manufacturers. Comes with intake rubber in two sizes (24 and 32mm). Due to this adaptor system, the carburettor can be mounted to face any direction.
Reference: TH46ADIO50-TD002-BK
Brand: Scootertuning.ca
Reference: VCR-RD45168/CA
Brand: Voca
Voca offers here the aprovred Sabotage exhaust for minarelli horizontal engine with 70cc sport aluminium or cast-iron cylinder kit. The torque and power are very similar to the Bidalot S3R and Yasuni R. The muffler is black anodised. We recommend a carburetor from 17.5 to 21mm sport variator like malossi multivar or polini hi-speed.
Reference: PACK00201
Brand: Bcd
BCD offers here RX pack for Yamaha Bws'R. The kit includes a front fairing RX, a rear fairing with stop LED and shoe. Congratulations to BCD team for this achievement. Attention : To install on Bws'R, you will need all fairing of european mbk booster 2004+
Reference: 9925150
Brand: Top performances
high quality Italian cylinder kit from top performances at very great price!
Reference: 209.0433
Brand: Polini
Replacement Gasket for the 79cc 2V Polini cylinder kit.
Reference: 204.0940/B
Brand: Polini
Replacement piston for the 79cc 4V Polini cylinder kit. Delivered as shown with piston rings, gudgeon pin and circlips.
Reference: 319540
Brand: Malossi
Replacement Malossi cylinder 70cc I-Tech ? Injection
Reference: 150.0605
Brand: Polini
Polini’s contribution to the field of injection engines. Unlike the Malossi version, the Polini Sport comes with a mechanical system, which makes the whole affair considerably cheaper. Performance and quality are similar to those of the Malossi sport cylinders. The fuel/air mixture can be exactly adjusted via the differently thick washers at the injection...
Reference: M-P009
Brand: Malossi
Complete engine package for CPI, Vento and Keeway scooter. Package include Malossi Sport 70cc cylinder kit, Variator Malossi multivar, Exhaust Tecnigas Silent Pro, Main jet set Stage6 80-102 6mm, Spark plug BR9HS, Malossi 16x13 roller and Malossi torque spring.
Reference: 3113865
Brand: Malossi
Malossi also offers a cylinder with a bore of 40mm. Thanks to optimized port durations and an enlarged exhaust port, this grey cast iron cylinder yields about 2-3 hp more than the stock cylinder. The cylinder comes complete with gaskets, piston and head. Works very well with exhausts such as Yasuni Z or Laser Xpro. Can be only used with malossi or...
Reference: 213.0048
Brand: Polini
Polini reed valve with increased intake diameter for a better cylinder filling; with vulcanized surface. Comes with carbon reeds!
Reference: 209.0399
Brand: Polini
This is the complete gasket set for Polini sport 50cc cylinders. Check the picture to see which gaskets are included.