No products
High-quality replacement gudgeon pin circlips from Malossi for 10mm and...
The HAT weights are very durable and self lubricating. Available in a...
Pro Taper is well known for manufacturing high-quality grips and...
Budget weights by Motoforce, choice of weights. Available in a range of...
Replacement reed valve gasket for all Minarelli Horizontal engines.
The thermal grade of the spark-plug is of prime importance with tuning...
We can offer high-quality exhaust gaskets for all common original, sport...
The Polini FOR RACE crankshafts are developed to increase the...
The Polini FOR RACE crankshafts are developed to increase the...
This is the ignition of the French...
Reference: SCT-5PJ-H4169-00-00
Brand: Scootertuning.ca
We can offer here Quality fairing parts for Yamaha Bws/Zuma 2002-2011.
Reference: 372.0003
Brand: Polini
Polini set carburetor idle jets suitable for Keihin PWK carbs.
Reference: RW-001
Brand: Rolling Wrench
***We recommend adding an iridium spark plug to complete your high class ignition system.*** Rolling Wrench EVI Motor Brain: This Performance CDI coil combo is specifically designed for the 50cc Honda Ruckus, this is not a universal cdi like others on the market. This is a performance CDI box and coil in one, no need to purchase a cdi box and a...
Reference: 91810-14807-00
Brand: Yamaha
Yamaha OEM replacement part. Dowel pin used to align the CVT cover.
Reference: 27793
Brand: Scootertuning.ca
Gear box cover gasket suitable for Minarelli engined scooter models.
Reference: 1000-1309.1
Brand: NCY
From NCY, these light-weight stainless brake disc screws are electroplated to resist corrosion and look kewl.
Reference: S6-35002RO
Brand: Stage6
These racing air filters from Stage6 feature a low-porosity foam for optimum filtering characteristics and are available in red, blue and yellow. They have a fitting diameter of 35mm, which fits all 12-21mm Dellorto and Arreche carburettors, and come in two lengths: 7 cm and 20 cm. The longer ones offer better air flow but may be too long for your scooter...
Reference: BOQ5001R
Brand: Yasuni
Replacement silencer flange for Yasuni Exhaust.
Reference: 6215899
Brand: Malossi
Malossi brake shoes have been perfected for the installation in the most important vehicles produced in Europe and Japan. Our engineers designed and tested them to easily withstand the stresses due to extreme use and above all they designed them for racing machines which need higher decelerations and performance consistency at elevated operating...
Reference: 081000
Brand: Athena
High performance Mid-race 70cc aluminum cylinder kit made in Italy by Athena. With the thermal advantages of aluminum provides these cylinders with better cooling and a higher peak power than cast-iron cylinder. Performance between 16-19 hp can be reached. Developed with 3D Solid Modelling software creating virtual simulation and verification of...
Reference: 237914B
Brand: Malossi
Reference: TH27ADIO50-BK2628
Brand: Scootertuning.ca
Reference: S6-3217500
Brand: Stage6
Complete intake system from Stage6. Consists of a teflon-coated inlet manifold with oil and vacuum connections, gaskets and the new SportPro (NBR) reeds. The big 2-petal reed block, combined with a carburettor of 19mm or more, unleashes much more power than the original 1-petal reed block. The rubber piece can be replaced in order to convert to bigger...
Reference: CR7E
Brand: NGK
NGK is one of the world’s leading spark plug manufacturers. As the factory-fitted choice of many vehicle brands, NGK is there when the spark starts to fade. You get an NGK standard spark plug, just like the one fitted to your vehicle. Heating value and plug construction are as the original. The service life of a spark plug depends on the fuel type, engine...
Reference: P258
Brand: Replay
Reference: 98-119
Brand: Kenda
Chunky, aggressive design for street-oriented dual-sports. Original equipment tires on models from several major manufacturers. Gravel and fire. road performance while maintaining excellent street manners. Long tread life for one of the best value motorcycle tires on the market
Reference: 187346
Brand: Teknix
Bargain replacement variator from Teknix, comes with one set of roller weights. Characteristics are like those of the original part, so this makes a good replacement without performance increase.
Reference: S6-7416605
Brand: Stage6
The Stage6 Sport Pro 70cc aluminium cylinder is a good and affordable cylinder that has been popular with many tuners - and now Stage6, with their new Sport Pro MKII, are taking it one step further. A completely new design incl. new transfer ports cater for 2 hp more, which with the right components results in 14-17 hp right out of the box. The appearance...
Reference: 617211
Brand: Malossi
This Kevlar reinforced drive belt is an absolute must-have for racing and high-end engines. Only when engine and vario have warmed up can the belt obtain its optimal grip. Reinforced with Kevlar fibre, this drivebelt can handle the strongest engines. The fact that this belt is a bit broader than the original one results in higher top speed, as the...
Reference: TRS-ASK
Brand: TRS
This axle spacer kit is to center wheel with aftermarket front hub normally used with Douglas, TRS or other Ruckus wheels. You may have to add (using washer) or remove (file) a couple thousanth off the spacer as we have no control over how far the manufacturer presses the bearing in the hub.
Reference: 081000/1
Brand: Athena
High performance Mid-race 70cc aluminum cylinder kit made in Italy by Athena. With the thermal advantages of aluminum provides these cylinders with better cooling and a higher peak power than cast-iron cylinder. Performance between 16-19 hp can be reached. 19-21mm carburetor and racing exhaust like Yasuni Carrera16, Stage6 R1200 or Polini for race 4 are...
Reference: BR9EIX
Brand: NGK
In addition to the standard spark plugs, we can also offer you special racing spark plugs with very thin electrodes made of platinum or iridium. Recommendable especially for highly tuned engines and when using an inner rotor ignition. The spark is much more stable at high revs and this type of electrode has better self-cleaning features than common CU...
Reference: NK390.18
Brand: Naraku
Naraku unrestricted CDI unit for horizontal Minarelli engines and some 2-stroke Chinese-built models. Not suitable for vehicles with a Ducati ignition (Malaguti and Beta models). Also makes a suitable spare replacement.
Reference: 6615509B
Brand: Malossi
This new small end bearing has been designed specifically for the MHR Team crankshaft and the respective BIG BORE cylinder kit with 13mm gudgeon pin diameter, so make sure your scoot uses the respective parts.
Reference: KW13988
Brand: Scootertuning.ca
Folding black kickstarter. Low-cost replacement for Chinese-built 2-stroke Minarelli-based engines like CPI, Keeway, MaWi, Longija etc.
Reference: 188634
Brand: Teknix
Replacement single throttle cable from Teknix made for most of popular scooter model.
Reference: 1414532
Brand: Malossi
Filter with double layers; the first layer has medium sized micro-pores to capture coarse dirt particles, while the second layer has very fine sized micro-pores to capture microscopic dust particles, the most damaging.
Reference: 188649
Brand: Teknix
Teknix speedometer cable in OEM quality, availabe at a good price.
Reference: NK901.13
Brand: Naraku
Reinforced starter motor freewheel without starter sprocket, from Naraku. The starter mechanism is subjected to higher loading where engines have higher compression. The starter motor freewheel has a metal securing ring (see image 2) and this prevents the winder drum from coming off the clutch. This ring should be removed before fitting the starter sprocket!
Reference: MF96.90036
Brand: Motoforce
We can offer you Motoforce exhaust studs in M6x26mm. Depending on the model, it may sometimes be quite complicated to mount an exhaust using conventional M6 bolts. Installing these studs before hand makes things a lot easier.
Reference: 245.015
Brand: Polini
Single set of Polini clutch springs. Tuned engines usually reach their maximum power only higher up the rev range, the engine will suffer from a loss of power at low revs though, resulting in slower acceleration. Polini offers this set of clutch springs in different strengths for stock clutches to bridge the gap in the power band.
Reference: 472612
Brand: Tun'R
Hot stuff: clear lens tail light with beautiful reflector. Comes with bulb and everything, just wire up and go.
Reference: 241.490
Brand: Polini
These HI-SPEED variators are Polini's newest development. They are of high quality and feature an optimised ramp design. The Polini Hi-Speed offers a combination of improved pull you can feel and a higher top speed. Depending on the model, the kit usually includes a torque spring that prevents belt slip and thus ensures better power transmission. The...
Reference: 031380B
Brand: Malossi
Clear fuel filter made of special hydrocarbon resistant plastic with nylon micromesh filter element.
Reference: 073703/1
Brand: Athena
This is the complete gasket set for Athena Sporting / Evolutuin / Modular cylinder kit. Check the picture to see which gaskets are included.
Reference: S6-72166ET09
Brand: Stage6
This is the complete gasket set for Stage6 Streetrace cylinders. Check the picture to see which gaskets are included.