No products
High-quality replacement gudgeon pin circlips from Malossi for 10mm and...
The HAT weights are very durable and self lubricating. Available in a...
Pro Taper is well known for manufacturing high-quality grips and...
Budget weights by Motoforce, choice of weights. Available in a range of...
Replacement reed valve gasket for all Minarelli Horizontal engines.
The thermal grade of the spark-plug is of prime importance with tuning...
We can offer high-quality exhaust gaskets for all common original, sport...
The Polini FOR RACE crankshafts are developed to increase the...
The Polini FOR RACE crankshafts are developed to increase the...
Reference: STR-063.04/
Brand: Str8
Funky grips by visual tuning expert STR8, made of a soft rubber compound that provides excellent grip and a comfortable feel. Available in several colours.
Reference: 538009
Brand: Malossi
High quality crankshaft by Malossi. HPC stands for high primary compression, or in plain English, it's a fullcircle crankshaft. The higher primary compression leads to a better charge, which moves the power band up the rpm range. Slightly weaker acceleration but more power are the results.
Reference: TH39ADIO-1538
Brand: Scootertuning.ca
Reference: BM03290
Brand: Scootertuning.ca
Inexpensive front brake disc for PGO and Genuine Scooter.
Reference: 074900/1
Brand: Athena
Attention! : Crankshaft Athena Racing 80cc 43mm stroke required! High performance sport aluminum Cylinder kit made in Italy by Athena. The thermal advantages of aluminum provides these cylinders with better colling and a higher peak power than cast-iron cylinder. Developed with 3D Solid Modelling software creating virtual simulation and verification of...
Reference: NK390.32
Brand: Naraku
High-quality electronic indicator relay for conventional indicators with bulbs, as well as LED indicators. Suitable for most 2-stroke and 4-stroke scooters, geared mopeds, motorcycles and quad / ATVs The flashing frequency adjusts automatically for the LED or standard bulbs. Total output of the relay is up to 150W; more than enough for all types of...
Reference: MF99.00055
Brand: Motoforce
This is the most inexpensive tool to lock the variator, available in two versions. It can simply be threaded into the spark plug hole of the cylinder head. Then turn the engine over carefully with the variator until the piston top touches the tip of the tool and the crankshaft is locked. Please employ this tool carefully; otherwise you can damage the...
Reference: 1116924B
Brand: Malossi
This is the complete gasket set for 90cc Malossi MHR Bigbore cylinder kit.
Reference: S6-140065
Brand: Stage6
We now offer an update on the caliper adapter for the 4-piston caliper from Stage6 R/T for Yamaha Aerox and Gilera Runner. The actual bracket remains the same, the length of the spacer sleeves has been slightly changed to be able to install more common brake disc sizes. The adapter can be used on various models and is designed for the original fork...
Reference: 7719096B
Brand: Malossi
This Wing Bell design was developed by Malossi. The outer cooling ribs give more form stability so that distortions and unbalances can be prevented. Furthermore, it cools the bell down by about 70
Reference: 166.0074/R
Brand: Polini
The Corsa is a Polini Powerfull Mid-Race 70cc cylinder improved from the Polini Sport 70cc cylinder. Extreme port timing, polished exhaust port and increased primary compression result signifiant power increase compared to standard 70cc cylinders with very good reliability. The piston is equipped with a chrome and a grey cast iron piston ring. To reach...
Reference: 201.2301
Brand: Polini
The CP is the first carburetor that has been completely developed by Polini and without a doubt one of best carburetor available. Special attention has been paid to size and weight: the carb is very compact and about 40% lighter as compared to traditional carbs. The compact design makes for a very short intake duct, which features a unique concentric...
Reference: 5PJ-F7411-00-00
Brand: Yamaha
Replacement OEM Yamaha parts.
Reference: NK102.07
Brand: Naraku
Complete set of quality crank oil seals from Naraku, for scooters with 125/150cc GY6 engines. Set contains all the important oil seals found in the engine. A must for engine overhauls. Purchasing individual shaft seals is usually more expensive, and when working on the engine or the gearbox, seals should always be replaced.
Reference: 166.0109
Brand: Polini
The Polini Sport 70cc is a very durable performance aluminium cylinder for everyday use. This kit is known for its impressive power considering the category. This high-torque cylinder give excellent acceleration, ideal for daily use. Comes with all gaskets etc. needed for installation.
Reference: MF92.101
Brand: Motoforce
In scooter racing, mechanical water pumps are often replaced with electric models to reduce the rotating mass at the crankshaft, which results in better throttle response and a slight increase in performance. Another situation where electric water pumps come in handy is when cylinders in air-cooled engines are replaced with liquid-cooled cylinders....
Reference: NK153.20
Brand: Scootertuning.ca
Crankcase cover gasket with exact fit. Made to replace the factory installed gasket.
Reference: 27-L910
Brand: Motul
Petroleum Based oil • Formula especially reinforced with extreme pressure additives for gearbox • High lubricating properties which decrease friction and wear and increase engine lifetime • High detergent and dispersive properties • Meets JASO MA • Standards: API SG
Reference: SCT-TS002
Brand: Scootertuning.ca
High Quality ScooterTuning T-Shirt (50% Polyester) with our new 2015 logo!
Reference: 348654
Brand: Malossi
Replacement piston for the Mhr Team 70cc 12mm cylinder kits
Reference: 1200-1021.10
Brand: NCY
High quality aluminum drive by NCY for Genuine & GY6 150cc scooters
Reference: VC30986
Brand: Scootertuning.ca
Replacement PY21W orange 12V 21W indicator bulb with BAU15s fitment, suitable for indicators using clear lenses. Please compare item specifics with your current bulb for compatibility.
Reference: MF42.00101
Brand: Motoforce
Whenever you change your scoot's tyres, we recommend also replacing the valves. These Motoforce valves are available for all common rims. length 3cm, straight
Reference: 90380-15817-00
Brand: Yamaha
Yamaha OEM replacement part. Goes on the kickstart shaft.
Reference: 91812-16805-00
Brand: Yamaha
Yamaha OEM replacement part. Dowel pin used to align both crankcases together.
Reference: 462611
Brand: Tun'R
Reference: P8764
Brand: Replay
Reference: TH15ADIO50-44
Brand: Scootertuning.ca
Mini stroker crankshaft for AF18 Honda Dio.
Reference: 27796
Brand: Scootertuning.ca
Reed valve gasket for scooters with Kymco horizontal (SF10) engines.
Reference: GY16362
Brand: Scootertuning.ca
Crankcase cover gasket for Chinese-built scooters with GY6 125/150cc engines. The gasket is solely for the short engine blocks of the 4-stroke models. These engines generally take a 743mm v-belt.
Reference: TRS-HLK/BK
Brand: TRS
Finally a BOLT-ON solution to lowering your headlights! No more need to send in your headlight frame for welding, you can just buy this simple bracket kit, and lower them yourself! Give your Ruckus a much lower, meaner stance and appearance in the front!
Reference: 0400-1005.4
Brand: NCY
We can offer here NCY Lower seat frame for Honda Ruckus/Zoomer. This seat frame reduce the seat height by 8cm. A must-have for custom tuners! Available in White, Black and Chrome.
Reference: P126220
Brand: Replay
Reference: 069854E
Brand: Malossi
Replacemet O-ring set for the MHR Overange 2005 rear pulley.
Reference: 060930011
Brand: Tecnigas
This is the successor of the Tecnigas Next. Its diffuser now consists of two segments. The silencer mounting has been changed and the exhaust now comes with a black rear silencer
Reference: 4CW-F4500-10-00
Brand: Yamaha
Replacement OEM Yamaha parts.