No products
High-quality replacement gudgeon pin circlips from Malossi for 10mm and...
The HAT weights are very durable and self lubricating. Available in a...
Pro Taper is well known for manufacturing high-quality grips and...
Budget weights by Motoforce, choice of weights. Available in a range of...
Replacement reed valve gasket for all Minarelli Horizontal engines.
The thermal grade of the spark-plug is of prime importance with tuning...
We can offer high-quality exhaust gaskets for all common original, sport...
The Polini FOR RACE crankshafts are developed to increase the...
The Polini FOR RACE crankshafts are developed to increase the...
Reference: 90480-12497-00
Brand: Yamaha
Yamaha OEM replacement part. Set of 3 rubber grommets to use with the Yamaha Bws/Zuma cooling fan cover.
Reference: LMCR9EH-9
Brand: NGK
The thermal grade of the spark-plug is of prime importance with tuning kits; if the wrong grade is used the kit will overheat or the spark-plug will foul. A hotter spark plug transfers more heat to the cyl head, which may lead to piston seizures. The Corsa kit comes with the correct spark-plug, for other kits we recommend the plug listed here. As a rule...
Reference: P12203
Brand: Replay
Reference: P22194
Brand: Artek
Reference: 0413435
Brand: Malossi
These red Malossi air filters with black end caps now come in a new design. All in all, they have a higher volume and feature a straight connection. The bigger design of course also requires sufficient space under the helmet compartment. Comes with adaptors of 42, 50 and 58.5 mm sizes for all common carb connection diameters.
Reference: 27-L221
Brand: Motul
Technosynthese® lubricant designed for 4-Stroke scooter engines. Specifically designed for scooters and maxi-scooters fitted with 4 stroke engines, any engine displacement, with or without catalytic converters, with wet clutch. All scooters used for daily commuting and urban riding. Suitable for all type of gasoline fuels, leaded or unleaded, biofuels....
Reference: BT24001
Brand: Scootertuning.ca
Throttle cable to fit most Chinese-built 4-stroke scooters, e.g. Rex RS 450, Capriolo MKS Ecobike, Baotion BT50QT-9, BT49QT-9, BT49QT-12 and many other models. If in doubt, compare the picture with your own cable. The length of the item supplied by us is approximately 190cm.
Reference: BM042754
Brand: Scootertuning.ca
Reference: BM00850001
Brand: Stylepro
Replacement Rear Converter kit for PGO and Genuine scooter.
Reference: BT13857
Brand: Scootertuning.ca
Oil strainer 50cc GY6 139QMB/QMA engines and 125/150cc GY6 152/157QMI.
Reference: W549.20.32
Brand: Wurth
Heavy duty hose clamp, can be used on most 23mm intakes, 15x22mm coolant hoses, etc.
Reference: VCR-SD850/
Brand: Voca
VOCA Racing presents its new series of handlebar protector for scooter, available in three different colors. Length: 180mm.
Reference: 244.012
Brand: Polini
Spare Vario fixed half for Evo variator (with plastic fins).
Reference: TRT-4002
Brand: 2Fast
From 2Fast, Italy: Crankshaft 2Fast 39,3mm / 85mm Minarelli LC, high-end racing crankshaft for ambitious tuners. For 70cc setups.The crankshaft was developed for the 70cc cylinders by 2Fast. It can of course also be used with other racing cylinders. The crankshaft has a stroke of 39,3mm (original) and a 85mm connecting rod. By using a different small end...
Reference: TH16ADIO50-54
Brand: Scootertuning.ca
Replacement piston kit 54mm for Honda Dio/Elite with AF16 and AF18 Engine.
Reference: NK900.26
Brand: Naraku
The NARAKU HS High Speed Variator is an evolution of one of the most successful variators for 4-stroke vehicles. The design of the weight surface yields maximum torque and top speed. The secret of a good variator is in the ability to hold the revs in the upper range for a long period of time. In this area, the HS-variator is one of the best variators for...
Reference: 1100-1011.10
Brand: NCY
Performance Camshaft designed specifically for the GY6 Engine. This cam is ideal for increasing low end power. With its increased leading slope and later intake valve opening makes this the perfect upgrade to go along with your larger displacement cylinder, big valve head, or performance exhaust. Intake Lobe 26.25mm. Exhaust Lobe 26.15mm
Reference: 0400-1007.10
Brand: NCY
Move your seat further back for a more comfortable riding position with this NCY adjustable seat kit. Adjust the seat back 4cm, 7cm or 10cm
Reference: TH38ADIO-03
Brand: Ruckhouse
This Low Down Shock is constructed of an anodized black billet body, 550lbs/in coil, and features an adjustable length and spring pre-load. Give your scooter the aggressive stance it deserves with this black on black rear shock. This shock is extremely popular with Honda Ruckus owners that want to go as low as possible. Drop your scooter an extra 1.5in...
Reference: S6-4000SC
Brand: Stage6
This is a very effective precision instrument that you will need to measure the port timing of different cylinders in 2-stroke engines. The wheel is black anodised and resistant to fuel and additives. The wheel can be mounted to all 50cc engines using the spacer; the indicator can be simply bolted to the stud!!! This is for all of you who want to exploit...
Reference: 33-707
Brand: Durabatt
Made using nanotechnology gel electrolyte. Leak proof, even with a broken container, due to gel consistency. Extends battery life up to 150%. Double the shelf life of an acid battery. The electrolyte is added at the factory, so there’s no need to add acid to this battery.
Reference: SCT-PA012
Brand: Scootertuning.ca
Reference: S6-7216651
Brand: Stage6
With the 70cc Streetrace grey cast iron cylinder series, Stage6 offers a more economical alternative to the popular SportPro Aluminium cylinder. The transfer port layout has been adopted from the high-performing 70cc SportPro, but slightly modified in order to fulfil the thermal demands of the cast iron cylinder. Stage6 has gone for a piston manufactured...
Reference: 1000-1373.6
Brand: NCY
These forks make a great upgrade to the clapped out stock tubes you’ve been running. Enjoy the smooth ride, improved handling and some fresh, delicious chrome! They have a 26mm tube and work with 10 mm axles and front disc brakes. They fit Zuma 50F, Eton Beamer and CSC go, among others.
Reference: MF18.16600
Brand: Motoforce
Bargain air filter box from Motoforce in original design. Comes with foam insert.
Reference: 1CD-H3330-01-00
Brand: Yamaha
Replacement OEM Yamaha parts.
Reference: 15498
Brand: Scootertuning.ca
M12x1.25mm nut for rotor and pulley on the crankshaft. Suitable for all special cranks with M12 thread for Piaggio and Minarelli engines. E.g.: Stage6 R/T, Polini Evolution, Malossi MHR Team Of course it also fits on original cranks with M12x1.25mm threads.
Reference: TRS-AFC99/BK
Brand: TRS
Looking for some nice, new frame caps for your Honda Ruckus? Check these frame caps out! These caps are CNC machined from 6061 Billet Aluminum, and are held in place by a snug fitting o-ring in the side of your frame. They cover up the unsightly bolts, and give the bike a really awesome look! Caps come raw, anodized red, anodized black or anodized black...
Reference: 6111246
Brand: Malossi
X Special trapezoidal belts are the best choice to ensure maximum performance and reliability from your scooter. They are produced with special mixtures to guarantee optimal resistance and drive; their forms have been developed to perfectly fit the surface of the automatic transmission elements. X Special Belt is not only perfectly compatible with the...
Reference: MOS006402JOI
Brand: Most
This is the complete gasket set for the Most wicked 70cc cylinders minarelli vertical. Check the picture to see which gaskets are included.
Reference: GY14635
Brand: Scootertuning.ca
Standard CDI ignition unit as factory-fitted.
Reference: P10275
Brand: Replay
Reference: 248.037.2
Brand: Polini
Polini Evolution drive belt, Kevlar-reinforced for longer belt life. For Polini variators Evolution and Speed Drive Evolution or other oversize variator systems.
Reference: S6-8018600
Brand: Stage6
High quality tuning parts from Stage6: Stage6 HPC Crankshaft for PGO Big Max / T-Rex, the perfect crankshaft for sport and racing cylinders. It was developed for tuned engines and is suitable for lightly tuned sport set-ups up to high-performance racing cylinders. The high quality crankshaft is completely made of metal, the counterweight inserts are also...
Reference: MAL005
Brand: Malossi
Individual stickers with the well-known Malossi logo, available in different sizes.
Reference: 5PJ-F4730-00-00
Brand: Yamaha
Replacement OEM Yamaha parts.