No products
High-quality replacement gudgeon pin circlips from Malossi for 10mm and...
The HAT weights are very durable and self lubricating. Available in a...
Pro Taper is well known for manufacturing high-quality grips and...
Budget weights by Motoforce, choice of weights. Available in a range of...
Replacement reed valve gasket for all Minarelli Horizontal engines.
The thermal grade of the spark-plug is of prime importance with tuning...
In order to offer optimal handling, a dragrace handlebar should be...
The Easyboost piston ring pliers make it easy to replace the piston...
The Stage6 torque drive is a stand-out piece of equipment, offering...
The Stage6 torque drive is a stand-out piece of equipment, offering...
Replacement float bowl screw for PWK carburetors
10% OFF PRE-ORDER - Shipping in May...
Viewed products
Pilot jets for 19 and 21mm carburetor from...
Pilot jets for 19 and 21mm carburetor from Dellorto (type PHBG). In some cases, the pilot jets may be too small or too big, which you can see from the scooter's throttle response. If you start the engine but only manage to ride about 10m at walking speed, then the pilot jet is too small. If the engine splutters up to about 1/4 of the throttle, the pilot jet is too big.
In stock
Carburetor Type | Dellorto 12-21mm |
Silencers are subject to great stress; from time to time they have to be...
Nut M10x1.25mm including washer for the crankshaft taper on the side of...
These Speed-up shims influence the length of the variator sleeve. Lengthening...
The new MALOSSI 7.1 MHR GREASE, recommended for use in extreme conditions or...
You can decide for yourself whether you want to run your engine with or...
Nut M28x1mm, to screw the clutch to the rear pulleys. Fits all Minarelli...
Reference: S6-28KH-005/ND
Brand: Stage6
Ideal kit to set up your carburetor. 10 pilot jets in a handy plastic box,...
Reference: 343.030
Brand: Polini
Ideal kit to set up your Polini CP carburetor. 5 pilot jets in a handy...
Reference: 372.0003
Brand: Polini
Polini set carburetor idle jets suitable for Keihin PWK carbs.
Reference: 372.0004
Brand: Polini
Polini set carburetor idle jets suitable for Keihin PWK carbs.
Reference: KH-PJ-26
Brand: Stage6
Powerjets for Stage6 type PWK 21 to 28mm carb. The powerjets make it possible...