No products
High-quality replacement gudgeon pin circlips from Malossi for 10mm and...
The HAT weights are very durable and self lubricating. Available in a...
Pro Taper is well known for manufacturing high-quality grips and...
Budget weights by Motoforce, choice of weights. Available in a range of...
Replacement reed valve gasket for all Minarelli Horizontal engines.
The thermal grade of the spark-plug is of prime importance with tuning...
We can offer high-quality exhaust gaskets for all common original, sport...
The Polini FOR RACE crankshafts are developed to increase the...
The Polini FOR RACE crankshafts are developed to increase the...
Ready to bring your bike into a class...
Viewed products
From 2Fast, Italy: Crankshaft 2Fast 45.8mm...
-15%
View largerFrom 2Fast, Italy: Crankshaft 2Fast 45.8mm stroke / 90mm connecting rod Minarelli horizontal, high-end racing crankshaft for ambitious tuners. For 90cc setups.
The crankshaft was developed for the 90cc cylinders by 2Fast and withstand speeds up to 20.000 rpm. It can of course also be used with other racing cylinders.
By using a different small end bearing with 17mm outer diameter, the crankshaft can also be used with cylinders with 13mm or 14mm piston pins.
Note: the engine block will need some machining to make room for this 'oversized' crankshaft. The crank webs have 76mm diameters.
In stock
Engine Type | Minarelli Horizontal |
Piston Pin | 13/14mm |
Stroke | 45.8 |
Conrod Length | 90mm |
Reference: S6-8031660/MET
Brand: Stage6
Especially with high-performance engines you should not be too stingy when it comes to buying crankshaft bearings. This is why Stage6 only collaborates with leading European and Japanese manufacturers of bearings and oil seals such as SKF and Corteco. We offer you these high-quality crankshaft bearing kits in 2 versions, with metal cage or with polymer...
Reference: 282.0002
Brand: Polini
High-quality NTN 6204 C4 Crankshaft bearings available from the Polini's factory. Include 2 Viton oil seals with 2 crankshaft bearings.
Reference: P400130444005
Brand: Athena
Especially with high-performance engines you should not be too stingy when it comes to buying crankshaft bearings. Kit include oil seal.
Reference: P400130444001
Brand: Athena
The version with polymer plastics cage has higher elasticity and a reduced friction coefficient as compared to the metal ball cage. This is also the type of bearing that we prefer for our racing engines. What is important for these bearings are the right ignition timing and carburettor settings, since these bearings should not be subjected to more than...
Reference: S6-802010
Brand: Stage6
High quality silver small end bearing from Stage6. The best bearings available on the market! The original item should be replaced when using a new crankshaft or tuning cylinder. Attention: Cannot be used with Malossi and Stage6 cranks, only original crankshafts! dimensions: 12 x 17 x 15mm
Reference: 280.0012
Brand: Polini
Small-end bearings from Polini in different diameters. Please check the size of the original bearing or the gudgeon pin before ordering.
Reference: 6611785B
Brand: Malossi
Malossi High quality 12x17x16mm small end bearing
Reference: 6615509B
Brand: Malossi
This new small end bearing has been designed specifically for the MHR Team crankshaft and the respective BIG BORE cylinder kit with 13mm gudgeon pin diameter, so make sure your scoot uses the respective parts.
Reference: S6-802057
Brand: Stage6
High quality silver small end bearing from Stage6 for many common engines. The best bearings available on the market! The original item should be replaced when using a new crankshaft or tuning cylinder. In addition to the common sizes, we also offer an extra-wide 10mm bearing. With some cylinder kits, the bearing has too much play and may wear unevenly....
Reference: 451081
Brand: Doppler
High Quality small end bearings from Doppler now available !
We can offer you a selection of engine bolts, screws, nuts and washers from...
The version with polymer plastics cage has higher elasticity and a reduced...
From 2Fast, Italy: Crankshaft 2Fast 39,3mm / 85mm Minarelli LC, high-end...
3 sets of Clutch springs for Stage6 Sport Pro and stock clutches. Harder...
This is the complete gasket set for 94cc 2Fast cylinder kit. Check the...
Replacement piston for the Polini evolution 3 / 4 70cc cylinder kits
Reference: 31073350
Brand: Airsal
In order to fully exploit the 90cc capacity of the Airsal Racing Xtrem...
Reference: TRT-4003
Brand: 2Fast
From 2Fast, Italy: Crankshaft 2Fast stroke 47mm / connecting rod 95mm...
Reference: 9925980
Brand: Top performances
Top Performances High Quality Full-Circle Crankshaft with 44mm stroke and...
Reference: 5317827
Brand: Malossi
This crankshaft has been developed specifically for Malossi's 94cc big-bore...
Reference: 5318440
Brand: Malossi
This crankshaft has been developed specifically for Malossi's 90cc big-bore...
Reference: TRT-4000
Brand: 2Fast
2 Fast offers here 44mm stroke with 90mm rod Crankshaft and Needle bearing...
Reference: MVT-VI29
Brand: MVT
The MVT Carrera Crankshaft belongs to the range of engine parts of the...