No products
High-quality replacement gudgeon pin circlips from Malossi for 10mm and...
The HAT weights are very durable and self lubricating. Available in a...
Pro Taper is well known for manufacturing high-quality grips and...
Budget weights by Motoforce, choice of weights. Available in a range of...
Replacement reed valve gasket for all Minarelli Horizontal engines.
The thermal grade of the spark-plug is of prime importance with tuning...
We can offer high-quality exhaust gaskets for all common original, sport...
The Polini FOR RACE crankshafts are developed to increase the...
The Polini FOR RACE crankshafts are developed to increase the...
Show your color! All new Scooter...
Viewed products
The Polini FOR RACE crankshafts are developed...
The Polini FOR RACE crankshafts are developed to increase the resistance. The rod has been increased and strengthened to better stand powerfull engines. They are perfectly equilibrated to reduce both the vibrations and the losses of power and they are heat-treated to improve the quality of resistance. Safe and reliable, their assembly is recommended both with original and tune-up engines.
In stock
Piston Pin | 10mm |
Stroke | 39.2mm |
Conrod Length | 80mm |
Reference: MF33.16607
Brand: Motoforce
This kit consists of 2 high-quality crankshaft bearings (C3/ C4), usually from SKF or NTN, and 2 oil seals in standard quality (NGK or KOK).
Reference: S6-8031660/MET
Brand: Stage6
Especially with high-performance engines you should not be too stingy when it comes to buying crankshaft bearings. This is why Stage6 only collaborates with leading European and Japanese manufacturers of bearings and oil seals such as SKF and Corteco. We offer you these high-quality crankshaft bearing kits in 2 versions, with metal cage or with polymer...
Reference: 282.0002
Brand: Polini
High-quality NTN 6204 C4 Crankshaft bearings available from the Polini's factory. Include 2 Viton oil seals with 2 crankshaft bearings.
Reference: P400130444005
Brand: Athena
Especially with high-performance engines you should not be too stingy when it comes to buying crankshaft bearings. Kit include oil seal.
Reference: 478935
Brand: Doppler
Doppler bearing and seal kits include SKF C4 rated bearings that use a polymer cage for improved lubrication and reduced friction at high RPM. Suitable for 50cc - 94cc tuned engines these are a must for any mid race to high end setup. Both crank seals are also included in each pack.
Reference: P400130444001
Brand: Athena
The version with polymer plastics cage has higher elasticity and a reduced friction coefficient as compared to the metal ball cage. This is also the type of bearing that we prefer for our racing engines. What is important for these bearings are the right ignition timing and carburettor settings, since these bearings should not be subjected to more than...
Reference: NK100.37
Brand: Naraku
Naraku HD (Heavy Duty) crank main bearing set. Set contains left and right in metal cage crank bearings and relevant shaft seals. Only bearings with C3 bearing clearance from NTN or KOYO used. Please note! When changing the crank, always use new bearings and seals.
Reference: S6-802000
Brand: Stage6
High quality silver small end bearing from Stage6. The best bearings available on the market! The original item should be replaced when using a new crankshaft or tuning cylinder. Attention: Cannot be used with Malossi and Stage6 cranks, only original crankshafts!
Reference: 324259
Brand: Doppler
High Quality small end bearings from Doppler now available !
Reference: 280.0017
Brand: Polini
Small-end bearings from Polini in different diameters. Please check the size of the original bearing or the gudgeon pin before ordering.
Reference: 6616783b
Brand: Malossi
This new small end bearing has been designed specifically for 10mm crankshaft. High Quality bearing!
Single set of Polini clutch springs. Tuned engines usually reach their...
We offer here Tun'R Double Layer Air Filter 28-35mm with 30deg angle at a...
Yamaha OEM replacement part. Ignition switch key cover.
These HI-SPEED variators are Polini's newest development. They are of high...
M6 exhaust port studs with collar nut (galvanized). Replacement for broken or...
We can offer here Replacement Brake caliper with hose and master cylinder for...
Reference: S410130320002
Brand: Athena
High Primary Compression Crankshaft made in Italy by Athena. High quality...
Reference: S410130320005
Brand: Athena
High Primary Compression Crankshaft made in Italy by Athena. High quality...
Reference: S410485320004
Brand: Athena
High Primary Compression Crankshaft made in Italy by Athena. High quality...
Reference: S6-8016601
Brand: Stage6
The Stage6 HPC (high primary compression) crankshaft is a full-circle...
Reference: S6-8016601/12
Brand: Stage6
The Stage6 Racing crankshaft for Minarelli engines with conrod for 12mm...
Reference: 441280
Brand: Doppler
Latest addition to Doppler's range of crankshafts. Excellent quality with...
Reference: 449885
Brand: Doppler
Quality made by Doppler. Works with all high end cylinders with 12mm piston pin.
Reference: S410485320006
Brand: Athena
The Racing Corsa Crankshaft and 10mm Pin is one of the fundamental components...
Reference: S410485320007
Brand: Athena
The Racing Corsa Crankshaft and 12mm Pin is one of the fundamental components...
Reference: 537891
Brand: Malossi
High quality crankshaft by Malossi. HPC stands for high primary compression,...
Reference: 538009
Brand: Malossi
High quality crankshaft by Malossi. HPC stands for high primary compression,...
Reference: 9925910
Brand: Top performances
Reference: 9928320
Brand: Top performances
Reference: 210.0048/12
Brand: Polini
The Polini FOR RACE crankshafts are developed to increase the resistance. The...