No products
High-quality replacement gudgeon pin circlips from Malossi for 10mm and...
The HAT weights are very durable and self lubricating. Available in a...
Pro Taper is well known for manufacturing high-quality grips and...
Budget weights by Motoforce, choice of weights. Available in a range of...
Replacement reed valve gasket for all Minarelli Horizontal engines.
The thermal grade of the spark-plug is of prime importance with tuning...
We can offer high-quality exhaust gaskets for all common original, sport...
Shape and volume of this exhaust were designed to perfectly complement...
The MKII is the second generation of the upside down shock absorber. It...
Meticulously balanced high-end full-circle crankshaft with tungsten...
Replacement gasket set for the Roost...
Viewed products
This Motoforce product is a bargain crankshaft...
This Motoforce product is a bargain crankshaft in OEM quality; can be used as a replacement for the original crankshaft or in slightly tuned engines. Construction is the same as of the original part; with lubrication hole in the small-end.
This product is no longer in stock
Engine Type | Minarelli Horizontal |
Piston Pin | 10mm |
Stroke | 39.2mm |
Conrod Length | 80mm |
Reference: MF33.16607
Brand: Motoforce
This kit consists of 2 high-quality crankshaft bearings (C3/ C4), usually from SKF or NTN, and 2 oil seals in standard quality (NGK or KOK).
Reference: NK100.37
Brand: Naraku
Naraku HD (Heavy Duty) crank main bearing set. Set contains left and right in metal cage crank bearings and relevant shaft seals. Only bearings with C3 bearing clearance from NTN or KOYO used. Please note! When changing the crank, always use new bearings and seals.
Reference: MF33.00020
Brand: Motoforce
Replacement small-end bearing from Motoforce. It can be used not only in Motoforce crankshafts, but is also ideal for original crankshafts. Size:10x14x13mm (Minarelli, CPI E1)
Reference: S6-802000
Brand: Stage6
High quality silver small end bearing from Stage6. The best bearings available on the market! The original item should be replaced when using a new crankshaft or tuning cylinder. Attention: Cannot be used with Malossi and Stage6 cranks, only original crankshafts!
Reference: 324259
Brand: Doppler
High Quality small end bearings from Doppler now available !
Reference: 280.0017
Brand: Polini
Small-end bearings from Polini in different diameters. Please check the size of the original bearing or the gudgeon pin before ordering.
Reference: 6616783b
Brand: Malossi
This new small end bearing has been designed specifically for 10mm crankshaft. High Quality bearing!
Brake cable for the rear brake. Rusted, seized or sticking brake cables can...
Replacement gasket that will be fitted below the alternator stator. Some...
Oil-gas shock absorber with adjustable spring preload, 35 mm longer wheelbase...
Rear wheel 12x3.5'' for GY6 150cc engine using 4x90mm rear hub. This wheel...
Affordable drive belt from Motoforce Racing in a reinforced Kevlar...
Progrip is well known for manufacturing high-quality grips and protective...
Reference: 248743
Brand: Teknix
This Teknix product is a bargain crankshaft in OEM quality; can be used as a...
Reference: IP10971
Brand: Scootertuning.ca
Good quality aftermarket crank for horizontal 50cc Minarelli AC and LC...