No products
High-quality replacement gudgeon pin circlips from Malossi for 10mm and...
The HAT weights are very durable and self lubricating. Available in a...
Pro Taper is well known for manufacturing high-quality grips and...
Budget weights by Motoforce, choice of weights. Available in a range of...
Replacement reed valve gasket for all Minarelli Horizontal engines.
The thermal grade of the spark-plug is of prime importance with tuning...
We can offer high-quality exhaust gaskets for all common original, sport...
The Polini FOR RACE crankshafts are developed to increase the...
The Polini FOR RACE crankshafts are developed to increase the...
This is the ignition of the French...
Viewed products
Fitting a big bore kit does not always give the...
Fitting a big bore kit does not always give the expected increased top end speed, it certainly improves acceleration well but not top end speed, Why? This often down the short gear ratios on your scooter, so if you find this is the case, the only way to combat this is by changing the gears to new longer ones. Here we have alonger version of the gears from well known perfomrance manufacturer Naraku, these gears are longer by 20% from the original (15/37 teeth) which will provide higher top end speed without loosing power on acceleration. These gears fit to all Chinese 125 and 150cc GY6 engines (152/157QMI). Please note: There are variants within the imported Chinese scooters so we would seriously recommend you remove the old gears and ensure count the number of teeth prior to purchase.
In stock
Reference: GY16359
Brand: Scootertuning.ca
Gasket for the gearbox cover on GY6 125/150cc 4-stroke engines.
Reference: GY6-BEAR-C
Brand: Taida
Taida gearbox bearing set for 125 and 150cc GY6 engines (152/157QMI).
Reference: GY6-BUSH
Brand: Taida
taida gearbox bushing set for 125 and 150cc gy6 engine (152/157QMI).
From NCY, these light-weight stainless brake disc screws are electroplated to...
Naraku V.3 carburettor 18.5mm for 50cc 4-stroke scooters. Top quality at an...
We can offer here complete brake master cylinder and cable lever unit for...
EGR block off plate used for removing EGR system on GY6 engines. Most GY6...
Cylinder studs including special nuts with M7 thread for securing the...
Reference: NK901.22
Brand: Naraku
Fitting a big bore kit does not always give the expected increased top end...
Reference: NK900.98
Brand: Naraku
Fitting a big bore kit does not always give the expected increased top end...
Reference: NK901.24
Brand: Naraku
Fitting a big bore kit does not always give the expected increased top end...
Reference: NK900.99
Brand: Naraku
Fitting a big bore kit does not always give the expected increased top end...
Reference: GY6-gear1537
Brand: Taida
Taida gears set longer by 20% from the original (14/39 teeth) which will...
Reference: GY6-gear1637
Brand: Taida
Taida gears set longer by 25% from the original (14/39 teeth) which will...
Reference: GY6-gear1736
Brand: Taida
Taida gears set longer by 31% from the original (14/39 teeth) which will...
Reference: GY6-gear1836
Brand: Taida
Taida gears set longer by 35% from the original (14/39 teeth) which will...