No products
High-quality replacement gudgeon pin circlips from Malossi for 10mm and...
The HAT weights are very durable and self lubricating. Available in a...
Pro Taper is well known for manufacturing high-quality grips and...
Budget weights by Motoforce, choice of weights. Available in a range of...
Replacement reed valve gasket for all Minarelli Horizontal engines.
The thermal grade of the spark-plug is of prime importance with tuning...
We can offer high-quality exhaust gaskets for all common original, sport...
We can now introduce the STR8 Mirror Set Street II. The sporty, sleek...
CNC-machined and high-quality anodized HQ seal installation tool that...
Extension cable for the sensor of the Stage6 exhaust gas temperature...
Stainless steel clamp for Koso EGT (Exhaust Gas Temperature) sensor,...
Yasuni's Carrera range consists of...
Viewed products
Drive face with optimized drive face angle. In...
Drive face with optimized drive face angle. In order to keep costs down, original racing drives are usually cast or - even worse - pressed steel. When these parts are cooling down after casting, the metal is still molten and the drive face angles can often vary. Due to the fact that racing engines have a very narrow power band, these tolerances have direct consequences on the power output. In contrast to those standard versions, the Stage6 racing drive is precisely CNC cut out of solid material. All in all, more than twelve different versions were tested to find the optimal angle.The high quality alloys and the special surface coating used in this drive face make cooling fins unnecessary. The reduced mass has of course positive results for the power at the rear wheel. This racing drive was actually developed for drag races, but Freddy Koopmans also used them with his racing scooters in the 2004 season.
In stock
Reference: MF60.16614
Brand: Motoforce
Especially where the kickstart is concerned, there should be no technical faults. In order to provide a better overview, we have divided the kickstart replacement parts into groups according to engines. Nevertheless, it may still be necessary to check sizes/dimensions with some parts, e.g. with bushes and kickstart shafts, as diameters may vary there.
Reference: NK900.84
Brand: Naraku
Replacement star washer / shim from Naraku for securing the outer variator pulleys. Corresponds to the size and design on the original. For all horizontal and upright Minarelli engines.
We can offer various torque springs from Malossi. The main thing about...
Replacement PY21W orange 12V 21W indicator bulb with BAU15s fitment, suitable...
Also known as Maintenance Free, this is a very popular type of battery and it...
Torque springs are important for the transmission set-up. The spring...
Ideal Kit for adjusting your carburetor. 10 main jets are included in this...
Reference: 244.0574
Brand: Polini
With the Evolution3, Polini has developed a completely new transmission...
Reference: TRT-8000
Brand: 2Fast
The new 2Fast Aluminium Oversize torque driver for Minarelli Horizontal and...
Reference: S6-5616634
Brand: Stage6
The oversize vario from Stage6 - the optimal complement to the Stage6...
Reference: 5112800
Brand: Malossi
With the MHR vario 2005 you are optimally equipped to get the most out of...
Reference: 5118678
Brand: Malossi
The New MHR Overrange 2013 variator! You are optimally equipped to get the...
Reference: S6-5916627
Brand: Stage6
High-quality oversize racing drive belt with kevlar fibres; excellent...
Reference: 248.040.2
Brand: Polini
Heavy duty v-belt. Must be used if Polini Evolution variator and Polini...
Reference: 6115822
Brand: Malossi
Special longer version of the X Kevlar belt for the Malossi Overrange 2013...
Reference: 617152
Brand: Malossi
The fixed half of the Vario is located at the end of the crank near the...
Reference: 244.012
Brand: Polini
Spare Vario fixed half for Evo variator (with plastic fins).
Reference: 244.0124
Brand: Polini
V-belt pulley from the Ceramic Air Speed Evolution range, for Minarelli...
Reference: 669417
Brand: Malossi
The HAT weights are very durable and self lubricating. Available in a range...
Reference: S6-GS15001
Brand: Stage6
Inexpensive variator adjustment kit by Stage6. The set consists of 4x6 cores...
Reference: S6-GSET
Brand: Stage6
Replacement shells for variomatic adjustment set Stage6
Reference: 242.40
Brand: Polini
Polini has revised and expanded its range of roller kit made for Scooter...
Reference: 242.026
Brand: Polini
Replacement shells for variomatic adjustment set Polini.
Reference: 242.05
Brand: Polini
The Polini roller weights also come coated and ready to use. The durable...
Reference: S6-5216601
Brand: Stage6
These black-coated torque springs from Stage6 are available in different...
Reference: S6-5216602
Brand: Stage6
These black-coated torque springs from Stage6 are available in different...
Reference: S6-5216603
Brand: Stage6
These black-coated torque springs from Stage6 are available in different...
Reference: S6-5616652
Brand: Stage6
These torque springs have been developed specifically for Stage6 R/T Oversize...
Reference: 297045.Y0
Brand: Malossi
We can offer various torque springs from Malossi. The main thing about...
Reference: 297046.R0
Brand: Malossi
We can offer various torque springs from Malossi. The main thing about...
Reference: 297047.W0
Brand: Malossi
We can offer various torque springs from Malossi. The main thing about...
Reference: 243.093
Brand: Polini
drive belt keeps slipping, the vario doesn't shift smoothly within the ideal...
Reference: 243.094
Brand: Polini
drive belt keeps slipping, the vario doesn't shift smoothly within the ideal...
Reference: 243.104
Brand: Polini
drive belt keeps slipping, the vario doesn't shift smoothly within the ideal...
Reference: TRT-TS001/RE
Brand: 2Fast
High Load Torque spring made in Italy by 2Fast. This torque spring is made to...
Reference: TRT-TS001/BL
Brand: 2Fast
High Load Torque spring made in Italy by 2Fast. This torque spring is made to...