No products
High-quality replacement gudgeon pin circlips from Malossi for 10mm and...
The HAT weights are very durable and self lubricating. Available in a...
Pro Taper is well known for manufacturing high-quality grips and...
Budget weights by Motoforce, choice of weights. Available in a range of...
Replacement reed valve gasket for all Minarelli Horizontal engines.
The thermal grade of the spark-plug is of prime importance with tuning...
We can offer high-quality exhaust gaskets for all common original, sport...
The Polini FOR RACE crankshafts are developed to increase the...
The Polini FOR RACE crankshafts are developed to increase the...
Show your color! All new Scooter...
Reference: IP12107
Brand: Scootertuning.ca
Accompanying kickstarter part. Should also be replaced when changing the cog.
Reference: 250.002
Brand: Polini
With the SpeedBell Polini offer an inexpensive clutch bell which can be used with 50 or 70cc setup. Speed Bells are the perfect replacement for the original clutch bell annealed and deformed. The Special alloy steel construction, good concentricity and compliance with tight tolerances make this belt an excellent purchase.
Reference: 27794
Brand: Scootertuning.ca
Gear box cover gasket suitable for 1E40QMB engined scooters.
Reference: 174.0076
Brand: Polini
Polini brake pads are high quality top performing brake pads and up there with the best, more so in the Racing Line, braking performance is noticeably improved and come highly recommended. Suitable for use on the road and more suitably on the track.
Reference: MF60.16618
Brand: Motoforce
Especially where the kickstart is concerned, there should be no technical faults. In order to provide a better overview, we have divided the kickstart replacement parts into groups according to engines. Nevertheless, it may still be necessary to check sizes/dimensions with some parts, e.g. with bushes and kickstart shafts, as diameters may vary there.
Reference: 119.0077/R
Brand: Polini
The Corsa is a Polini Powerfull Mid-Race 70cc cylinder improved from the Polini Sport 70cc cylinder. Extreme port timing, polished exhaust port and increased primary compression result signifiant power increase compared to standard 70cc cylinders with very good reliability. The piston is equipped with a chrome and a grey cast iron piston ring. To reach...
Reference: 4WX-E2653-00-00
Brand: Yamaha
Remplacement Fan cooling cover for Yamaha Bws / Zuma 2002-2011
Reference: NK390.09
Brand: Naraku
NARAKU Racing ignition coil with high-end secondary coiling. With this coil, the secondary voltage is almost doubled. The ignition voltage of the original ignition coil is approx. 16,000v. With the "race high tension coil" ignition from Naraku released 31,000v! The advantage lies in the better "translation" of the original input power. High ignition...
Reference: 3612541
Brand: Malossi
High-quality replacement gudgeon pin circlips from Malossi for 10mm and 12mm gudgeon pins. When installing the circlips, please make sure that the groove is clean and the clips are positioned correctly. We recommend inserting the clips with the opening facing the piston's direction of travel and fixing them with a drop of thread glue. Scope of supply: 1...
Reference: 203.0155
Brand: Polini
Polini air filter element suitable for Yamaha Bws / Zuma 50F
Reference: SCT-B1S015/CR
Brand: Scootertuning.ca
We offer here 100% bolt on stand for Yamaha Bws/Zuma 2002-2011. This stand directly work without any modifications, no cutting, no welding. You simply install the stand with the ''U'' Bolt supplied and it's ready to use!
Reference: 248.003
Brand: Polini
Belt and variator weights are the automatic scooter parts most likely to wear out. These heavy-duty POLINI belts will survive significantly longer than the original ones.
Reference: 343.0022
Brand: Polini
Polini 90 degree throttle cable guide for carb caps.
Reference: MF96.90019
Brand: Motoforce
We can offer you a selection of engine bolts, screws, nuts and washers from Motoforce, such as the ones for the engine or gear box cover, for the shock absorber mount or the oil drain plug. These are high-quality small parts. Please check the size before ordering.
Reference: IP32442
Brand: Scootertuning.ca
Variator pulley plate for Minarelli engines wit ha 13mm crankshaft taper. Pulley diameter is 94.3mm.
Reference: S6-3199900
Brand: Stage6
Stage6 universal choke. No matter whether you want to convert your electric choke or simply choose a stylish alternative to the original manual choke - this CNC milled Stage6 product is what you need, offering high quality as well as cool looks. There are 2 possible ways of mounting: either you use the adjustable retaining clamp, or you simply insert it...
Reference: 477477
Brand: Tun'R
Tun'r indicator light with orange bulb and transparent lenses to add a clean and modern touch to your ride. Quick and easy to install.
Reference: MF96.90018
Brand: Motoforce
We can offer you a selection of engine bolts, screws, nuts and washers from Motoforce, such as the ones for the engine or gear box cover, for the shock absorber mount or the oil drain plug. These are high-quality small parts. Please check the size before ordering.
Reference: MF60.16653
Brand: Motoforce
Especially where the kickstart is concerned, there should be no technical faults. In order to provide a better overview, we have divided the kickstart replacement parts into groups according to engines. Nevertheless, it may still be necessary to check sizes/dimensions with some parts, e.g. with bushes and kickstart shafts, as diameters may vary there.
Reference: 263880
Brand: Doppler
Taller gears in the transmission reduce the overall reduction factor of the gearbox. If the engine is powerful enough to pull the taller gears, this modification will also raise top speed. Only use with tuning kits! Original cylinders are normally not powerful enough to pull this sort of gearing. Must be combined with a M10x1.00 hex nut.
Reference: MF96.90011
Brand: Motoforce
Exhaust stud M6x1mm, for nearly all engines. Required to screw the exhaust to the cylinder.
Reference: SCT-B1S015/BK
Brand: Scootertuning.ca
We offer here 100% bolt on stand for Yamaha Bws/Zuma 2002-2011. This stand directly work without any modifications, no cutting, no welding. You simply install the stand with the ''U'' Bolt supplied and it's ready to use!
Reference: 209.0383
Brand: Polini
Replacement Polini gasket set 70cc [Corsa] - Kymco/Sym upright
Reference: STR-550.10/
Brand: Str8
STR8 transmission cover retaining bolts for Minarelli engines. The blue and red bolts as well as the chrome-coated ones are made of anodised aluminium and should be used for custom purposes only. The black ones can, however, be safely used to replace the original bolts.
Reference: TUB901
Brand: Yasuni
The Yasuni Z from the Spanish manufacturer Yasuni is an absolutely high performance exhaust when combined with 50cc and 70cc sport cylinders. Good performance and amazing sound. This exhaust is equipped with a classy Aluminium silencer, but also available with the following silencer : Aluminium Black, Carbon and Carbon Kevlar. You just have to choose the...
Reference: SCTFR004
Brand: Scootertuning.ca
We can offer here Quality fairing for Yamaha Bws/Zuma 2002-2011.
Reference: 6714039
Brand: Malossi
Malossi S.p.A. is pleased to offer its new series of final transmission gears for scooters and maxi scooters. These new gears were created by exploiting 20-year experience in designing and building gears for competition and road scooters. The new H.t.q. gears were designed and built with straight teeth to minimise losses through friction and stress on the...
Reference: 467817
Brand: Tun'R
We offer here Tun'R Double Layer Air Filter 28-35mm with 30deg angle at a great price! This air filter with double layer foam is compatible with all Dellorto carburettors 12 to 21mm. Your carburetor will get more air, dirt and other impurities will be filtered out and your engine will sound more "racing".
Reference: SCT-CABLE
Brand: Scootertuning.ca
Throttle control cable, suitable for Yamaha Bws/Zuma 2002-2011 with oversize caburettor. Attention! No throttle stopper included!
Reference: NK100.21
Brand: Scootertuning.ca
Exhaust manifold gasket for scooters and mopeds with original and tuning/sports exhaust systems with round metal gaskets and dimensions of approx. 25X33x4mm.
Reference: SCTFR005
Brand: Scootertuning.ca
We can offer here Quality fairing for Yamaha Bws/Zuma 2002-2011.
Reference: SCT-BE0023/CR
Brand: Ruckhouse
We can offer here handlebar bar end mirror with stainless steel grab screw for 7/8 standard handlebar. Cannot be used on both side, you have to purchase each side (right and left) serparatly by choosing it in the dropdown menu. Attention, Sold individually!
Reference: 203.0098
Brand: Polini
We can now offer you these air filters from Polini. A splash protection that can be installed additionally, they are primarily intended for sporty use. Please remember: when using this carburettor, you will need to upjet your carb (depending on your tuning stage) or otherwise risk engine damage.
Reference: 203.0091
Brand: Polini
We can now offer you these air filters from Polini. With their 37mm, 30deg connections and a splash protection that can be installed additionally, they are primarily intended for sporty use. Please remember: when using this airfilter, you will need to upjet your carb (depending on your tuning stage) or otherwise risk engine damage.
Reference: 4WX-E2651-00-00
Brand: Yamaha
Remplacement Cylinder cooling cover for Yamaha Bws / Zuma 2002-2011
Reference: 6111108
Brand: Malossi
Special longer version of the X Kevlar belt for the Malossi Overrange kit. The ideal drive belt for racing and high end-engines. Only when engine and vario have warmed up can the belt obtain its optimal grip. Its Kevlar reinforcement make it perfect for the use with the strongest engines. The fact that this belt is a bit broader than the original one...