No products
High-quality replacement gudgeon pin circlips from Malossi for 10mm and...
The HAT weights are very durable and self lubricating. Available in a...
Pro Taper is well known for manufacturing high-quality grips and...
Budget weights by Motoforce, choice of weights. Available in a range of...
Replacement reed valve gasket for all Minarelli Horizontal engines.
The thermal grade of the spark-plug is of prime importance with tuning...
We can offer high-quality exhaust gaskets for all common original, sport...
The Polini FOR RACE crankshafts are developed to increase the...
The Polini FOR RACE crankshafts are developed to increase the...
Super light weight 3.75” round CF...
Reference: 455360
Brand: Tun'R
Tun'r transmission cover retaining bolts for Minarelli engines. The steel bolts can be used for everyday use (stronger than aluminium).
Reference: MF10.12168
Brand: Motoforce
We can offer you high-quality exhaust gaskets for all common original and sport exhaust systems.
Reference: IP13864
Brand: Scootertuning.ca
M6 exhaust port studs with collar nut (galvanized). Replacement for broken or bent studs. 32mm in length. Set of 2xM6 studs and 2xM6 collar nuts.
Reference: MF96.00030
Brand: Motoforce
The Motoforce oil seal set includes both oil seals for the crankshaft in the well-known OEM quality.
Reference: SCT-021090
Brand: Scootertuning.ca
Replacement Airbox with a larger air volume ideal for cast iron 70cc engine - same foam filter than oem airbox - direct fitment (no modification required)
Reference: IP12716
Brand: Scootertuning.ca
Aftermarket part for defective kick-start shafts. Item matches design and size of the original.
Reference: LM7085004
Brand: NGK
NGK 90degspark-plug cap and HT leads. Available either as standard or silicon versio
Reference: 0900-1076.10
Brand: NCY
The NCY cdi is the part needed to give you the extra power needed for your Honda Ruckus. The NCY cdi will removed the rev limiter from the OEM cdi. See Lower the information you need for the proper installation.
Reference: 01-0041
Brand: IRC
IRC high quality dual-Purpose scooter tires that provide good traction on street.
Reference: D1101/BK
Brand: Adelin
We can offer here complete brake master cylinder and cable lever unit for scooter with front disc brake and rear drum brake. Great part with Stage6 switch unit on zuma! Available in black and aluminium color. This part are also available in complete hydrolic set for scooter with rear disc brake.
Reference: 529451
Brand: Malossi
High Quality race clutch from Malossi. You can adjust the rpm at which the clutch engages by increasing the spring preload. You need a bit of dexterity for this, though.
Reference: BR9ES-3194
Brand: NGK
The thermal grade of the spark-plug is of prime importance with tuning kits; if the wrong grade is used the kit will overheat or the spark-plug will foul. A hotter spark plug transfers more heat to the cyl head, which may lead to piston seizures. The Corsa kit comes with the correct spark-plug, for other kits we recommend the plug listed here. As a rule...
Reference: 346172
Brand: Malossi
Replacement piston for the Malossi sport 70cc cylinder kits
Reference: 97-
Brand: Duro
Sport scooter tires with a stylish profile. Large contact patch provides excellent grip
Reference: IP13502
Brand: Scootertuning.ca
Original design (Kymco style) rear view mirror set with E-mark. This mirror design is used on most 50cc Kymco and low-cost scooters or motorbikes for instance. A low-cost alternative to an expensive original item. Can also be used on any other scooter, motorcycle or quad with 8mm thread. Set contains 1x right side mirror with M8 left-hand thread and 1x...
Reference: 263997C
Brand: Malossi
If you install a tuning carburettor the throttle and choke cable often hit it at another angle than was intended on an original carburettor. In order to prevent the cables getting kinks or damaged due to friction the use of cable blends is recommended in order to safely reroute the cables.
Reference: 298745B
Brand: Malossi
Clutch springs for sport & racing clutches. Harder clutch springs result in clutch engagement at higer revs (and therefore higher power development) and gives much better acceleration from standstill.
Reference: 518852
Brand: Malossi
The MULTIVAR is a sturdy high-quality variator from Malossi. Included in the package are a torque spring and a set of 16x13mm weights. CAD-designed roller area to give very good acceleration and a wider range.
Reference: MF96.90008
Brand: Motoforce
A replacement M12 x 1.25mm nut incl. washer for the alternator/variator side of the crankshaft. Fits all 12mm crankshaft tapers of Minarelli and Piaggio engines (e.g. Stage6 R/T, Polini Evolution, Malossi MHR TEAM). Attention: Only suitable for crankshafts with 12mm taper!
Reference: S6-91ET014
Brand: Stage6
Exhaust bolt (M6 x 18mm) for nearly all common scooter models. Can be fitted with a 10mm spanner or a Phillips screwdriver.
Reference: S6-5819506
Brand: Stage6
The variator comes adjusted for use with a 50cc cylinder and a Stage6 ProReplica exhaust system. It has been developed and optimised for use with Stage6 SportPro/ Streetrace or similar 70cc sport cylinders though. The back of the variator and the roller tracks are hard coated, the running surface is, however, uncoated. On the one hand, this reduces the...
Reference: SCT-GA008
Brand: Scootertuning.ca
We offer here replacement Gearbox cover gasket for AF16-AF18 Engine.
Reference: 451580
Brand: Tun'R
Tun'r offer here glue-on indicators ''Raindrop'. Stylish drop-shaped signal lights that can be glued to every smooth surface.
Reference: 480412
Brand: Tun'R
Beautiful F1-look mirror with real mirror glass and a short body. Fits both left and right side, as it comes with a fitting piece to adapt to left hand thread. Fits all scooters with M8 thread size and is available in a choice of colours. New enhanced quality and brighter colours!
Reference: S6-32ET0
Brand: Stage6
If you have a carburetor with a large fitting diameter, we now can offer you adaptors for 23, 30, 32mm and 40mm, which you can attach to the Stage6 manifold without any problems.
Reference: 249.051
Brand: Polini
Different from the 2G Evolution, Polini's 3G ForRace clutch has still been equipped with 2 shoes, but now it also comes with 3 shoes. Clutch engagement can be adjusted by exchanging the supplied springs. For fine adjustment, it is done with the help of a hex key wrench from the side. However, the springs haven't been positioned to face the front. So if...
Reference: MF33.16607
Brand: Motoforce
This kit consists of 2 high-quality crankshaft bearings (C3/ C4), usually from SKF or NTN, and 2 oil seals in standard quality (NGK or KOK).
Reference: NK800.07
Brand: Naraku
These Speed-up shims influence the length of the variator sleeve. Lengthening can improve acceleration and shortening can increase top end speed. Measure the length of the sleeve before installing the length of your choice. Kit contains 30 Control shims with 10 of each of the following: 0.1mm, 0.2mm and 0.5mm thick. When using tuning variators, measure...
Reference: BR9ES-5722
Brand: NGK
The thermal grade of the spark-plug is of prime importance with tuning kits; if the wrong grade is used the kit will overheat or the spark-plug will foul. A hotter spark plug transfers more heat to the cyl head, which may lead to piston seizures. The Corsa kit comes with the correct spark-plug, for other kits we recommend the plug listed here. As a rule...
Reference: S6-3219000
Brand: Stage6
Working closely together with the US manufacturer Moto Tassinari, who is famous for high performing reed valves in the field of motocross engines, this V-Force3 has been developed. This construction of the double V-reeds is patented and thanks to its huge inlet diameter and an optimized airflow, it provides much better filling of the crankcase. To ensure...
Reference: 2711817.C0
Brand: Malossi
Malossi's latest reedblock design as derived from the MHR series with race track pedigree. No reed stops and huge petals which sensibly respond to crankcase impulses. Comes with a gasflowed stuffer.
Reference: D1101/AL
Brand: Adelin
We can offer here complete brake master cylinder and cable lever unit for scooter with front disc brake and rear drum brake. Great part with Stage6 switch unit on zuma! Available in black and aluminium color. This part are also available in complete hydrolic set for scooter with rear disc brake.
Reference: 6117087
Brand: Malossi
This Kevlar reinforced drive belt is an absolute must-have for racing and high-end engines. Only when engine and vario have warmed up can the belt obtain its optimal grip. Reinforced with Kevlar fibre, this drivebelt can handle the strongest engines. The fact that this belt is a bit broader than the original one results in higher top speed, as the...
Reference: MLR501R10
Brand: Yasuni
Yasuni 55mm replacement spring.
Reference: S6-75KO02
Brand: Stage6
Replacement piston for the Stage6 MKII Sport Pro 70cc cylinder kits. Please choose your engine type and the required piston pin diameter.
Reference: 364450
Brand: Malossi
High-quality replacement gudgeon pin circlips from Malossi for 10mm and 12mm gudgeon pins. When installing the circlips, please make sure that the groove is clean and the clips are positioned correctly. We recommend inserting the clips with the opening facing the piston's direction of travel and fixing them with a drop of thread glue. Scope of supply: 1...